LG RP4 Specification sheet

www.lg.com
Copyright © 2021 LG Electronics Inc. All Rights Reserved.2106_Rev01
SIMPLE MANUAL
Omnidirectional portable
speaker
MFL71841329
RP4
RP4B
RP4BE
RP4G
ENGLISH
Specication
Power requirements
yRefer to the main label.
Power consumption
yRefer to the main label.
Dimensions (W x H x D): Approx. 247.5 mm x 514.0 mm x 247.5
mm
Bus Power Supply (USB): 5 V 0500 mA
Amplier (Total RMS Output power): 120 W RMS
Battery Life: Approx. 10 hours (Varies by volume level and audio
content.)
yThis unit contains magnets which can be harmful to some
kind of object (Ex: Magnetic card, Pacemaker etc.).
yInternal lithium battery in the unit should not be replaced by
user because of danger of explosion if battery is incorrectly
replaced, and must be replaced with the same type battery
by expert.
yDo not leave the unit on an unstable place such as high
shelves. It may fall down because of the vibration of the sound.
CAUTION when using this product in environments of low
humidity.
-It may cause static electricity in environments of low
humidity.
-It is recommended to use this product after touching any
metal object which conducts electricity.
POWER: This unit operates on a mains supply of
200 - 240 V ~ 50 / 60 Hz.
Wiring: This unit is supplied with a BS 1363 approved main plug.
When replacing the fuse, always use a fuse of the same rating
and approved to BS 1362. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your
dealer. If the type of plug supplied is not suitable for the mains
sockets in your home, then the plug should be removed and a
suitable type tted. Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead of this unit
must be destroyed. A mains plug with bared wires is hazardous
if inserted in a mains socket. Do not connect either wire to the
earth pin, marked with the letter E or with the earth symbol 6
or coloured green or green and yellow. If any other plug is tted,
use same rating of fuse in the plug.
Important: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires
in the mains lead of this unit may not correspond with the
coloured marking identifying the terminals in your plug, proceed
as follows: The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
RP4.DNGAFLK_SIMPLE (Sheet)_MFL71841329.indd 1-2 2021-08-17  11:08:48

AUX
USB
BT
a
b
c
d
TWIN
MAIN
OTHER
RESET
AUX. IN
e
<Android> <iOS>
A
B
E
D
C
C
ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
A Handle
B Controls
C Speaker
D Mood lighting
E Woofer
aConnectthepowercordtotheproductandchargeitbeforeuse.Youcanndthepowersocketatthebottomofthe
product.
b ConnectingtheSpeakertoaSmartphoneUsingBluetooth
APress the Power button to turn on the product.
BPress and hold the Function button on the product until you hear a notication sound. Bluetooth LED blinks for 60
seconds.
C Tap the Settings button on your smartphone and select Bluetooth. Turn on the Bluetooth function. ( Off >
On)
D From the list of smartphone devices, nd and tap on “LG-RP4(XX).”
E Once the smartphone is connected to the product via Bluetooth, the Bluetooth LED will turn on. Play a desired track in the
music app on your smartphone.
cPlayingMusicfromtheUSB
A Open the back cover of the product and plug the USB storage device into the USB terminal.
BPress the Power button to turn on the product.
CPress the Function button on the product repeatedly to select the USB function. The USB LED will turn on.
DPress the Play/Pause button to enjoy the music.
d ConnectingtoanExternalDevice
A Open the back cover of the product and connect the external device to the AUX. IN terminal via a 3.5 mm stereo cable.
BPress the Power button to turn on the product.
CPress the Function button on the product repeatedly to select AUX. The AUX LED will turn on. If you play music on the
connected external device, you can start listening on this product.
eConnectingtotheLGXBOOMApp
AFind the LGXBOOM app on the Google Play or App Store and install it on your smartphone.
BRun the LGXBOOM app and use its functions.
f PowerSaving
If there is no playback or button input for 15 minutes, the product turns off automatically. On the LGXBOOM app, you can enable or
disable [Auto Power Management].
yDesign and specications are subject to change without notice.
RP4.DNGAFLK_SIMPLE (Sheet)_MFL71841329.indd 3-4 2021-08-17  11:08:50