LG SP2 User manual
www.lg.com
MFL71456260
SP2
توصلا ربكم
SOUND BAR
ENGLISH
Specication
Power requirements
yRefer to the main label.
Power consumption
yRefer to the main label.
Dimensions (W x H x D): Approx. 760.0 mm x 63.0 mm x 90.0
mm
Bus Power Supply (USB): 5 V 0500 mA
Amplier (Total RMS Output power): 100 W RMS
POWER: This unit operates on a mains supply of
100 - 240 V ~ 50 / 60 Hz.
Wiring: This unit is supplied with a BS 1363 approved main plug.
When replacing the fuse, always use a fuse of the same rating
and approved to BS 1362. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your
dealer. If the type of plug supplied is not suitable for the mains
sockets in your home, then the plug should be removed and a
suitable type tted. Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead of this unit
must be destroyed. A mains plug with bared wires is hazardous
if inserted in a mains socket. Do not connect either wire to the
earth pin, marked with the letter E or with the earth symbol 6
or coloured green or green and yellow. If any other plug is tted,
use same rating of fuse in the plug.
Important: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires
in the mains lead of this unit may not correspond with the
coloured marking identifying the terminals in your plug, proceed
as follows: The wire which is coloured blue must be connected to
the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.
y
y
xx
0USB
RMSRMS
6E
N
L
SP2.CIRQKLK_SIMPLE_MFL71456260.indd 1-3 2021-06-29 1:26:04
ENGLISH
Installing and Using the Product
Please read this manual carefully before operating your set and retain it for future reference.
To view the instructions of advanced features, visit http://www.lg.com or scan QR code and then download
Owner’s Manual. Some of the content in this manual may differ from your product.
ASound bar
B Remote Control Receiver /
Status LED (Refer to below table)
C External Device - (Blu-ray player, game console, etc.)
Power on Standby OPTICAL /
HDMI ARC
Bluetooth
ready Bluetooth LG TV HDMI IN USB
Red blinking Red White Blue blinking Blue White White Green
aConnectthesoundbartoyourTVviaanopticalcableoranHDMIcable.
b If you are using an external device (ex. Blu-ray player, game console, etc.), connect it to the sound bar via an HDMI cable.
cUsingtheproductwithyourTV
A Press the Function button repeatedly until the rst from above LED lights up in white among the three LEDs.
B On your TV’s settings, set the output speaker to [HDMI ARC], [Optical], or [External Speaker].
dConnectingtheproducttoyoursmartphoneviaBluetooth
A Tap the Settings button on your smartphone and select Bluetooth.
Turn on the Bluetooth function. ( Off > On)
BPress the Bluetoothpair button. After a moment, the second LED lights up in blue and blinking among the three LEDs.
C Find and tap the product on your smartphone. The product appears as “LG SP2 (XX)”.
eConnectingtotheLGSoundBarapp
A Find and install the LG Sound Bar app on Google Play or App Store from your smartphone.
B You can get more information regarding its use by selecting [Help] in [Setting].
yDesign and specications are subject to change without notice.
yGoogle Play is a trademark of Google LLC.
A
B
LED
C
USB
.HDMI a
.HDMI b
c
LEDLED A
B
Bluetoothd
Bluetooth A
Bluetooth
LEDLED Bluetooth B
.” C
e
A
.] B
y
y.
HDMI OUT
OPTICAL
IN
HDMI OUT
(TV ARC)
HDMI IN
a
b
C
a
B
A
HDMI IN
(ARC)
HDMI IN OPTICAL
OUT
Replacement of Battery
SP2.CIRQKLK_SIMPLE_MFL71456260.indd 4-6 2021-06-29 1:26:06
Other manuals for SP2
6
Other LG Speakers manuals
