LG CM9940 User manual

Life's Good
Please read this manual carefully before operating
your set and retain it for future reference.
CM9940 (CM9940, CMS9940F/W)
i !iI !1111III III i111
MFL67989451
www./g.com

2 Gettin 9 Started
©
Safety Information
CAUTION
CAUTION:TO REDUCETHE RISKOF ELECTRK.
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVIC.EABLEPARTSINSIDE REFERSERVIC.ING
TO QUALIFIED SERVId.EPERSONNEL.
This lightning flashwith
arrowhead symbol within an
equilateral triangle is intended to
alert the userto the presence of
uninsuJateddangerous voltage
within the product's enclosure
that may beof sufficient
magnitude to constitute a riskof
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the userto the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
CLAssI LASe£PROOUCT
K_SSE LASER PRODUKT
_]LUO_N _ _SER LAITE
K_SS _ taS_R APP,_RAT
Cb_SSE_ PRODUlTLASE_
CAUTION:This product employs a Laser System.
To ensure proper use of this product, please read
this owner's manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating.The
openings shall be never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer's
instruction has been adhered to.
WARNING:TOPREVENTFIREOR ELECTRICSHOCK
HAZARD,DO NOTEXPOSETHISPRODUCTTORAIN
ORMOISTURE.
WARNING: Do not install this equipment in a
confined spacesuch asa book caseor similar unit.
CAUTION:The apparatus should not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such asvases,should be placed on the
apparatus.

Geffin 9 Sfart"ed 3
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is,a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner's manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance.To
disconnect power from the mains, pull out the
mains cord plug.When installing the product,
ensure that the plug is easily accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
o]d battery or battery pack, fo]]ow the steps
in reverse order than the assemb]y.To prevent
contamination of the environment and bring on
possible threat to human and anima] hea]th, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators.The battery shah not be exposed to
excessive heat such as sunshine, fire or the like.
Grounding
(Except for devices which are not grounded.)
Ensure that you connect the earth ground wire
to prevent possible electric shock (i.e. a Audio
with a three-prong grounded AC plug must be
connected to a three-prong grounded AC outlet).
If grounding methods are not possible, have a
qualified electrician instal] a separate circuit breaker.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
©

4 T_bleofContents
Table of Contents
1 Getting Started
2 Safety Information
6 Unique Features
6 Accessories
7 Playable file Requirement
7 - MPS/WMA music file requirement
7 - Compatible USB Devices
7 - USB device requirement
S Remote control
10 Front panel
12 Rear panel
2 Connecting
13 Connecting to speakers
13 - Attaching the high channel speakers
to the unit
13 - Attaching the low channel speakers to
the unit
14 - Attaching the speaker light cables to
the unit
15 - Stacking the speakers
16 Optional Equipment Connection
16 - AUX IN Connection
16 - PORT. IN Connection
16 - Listening to music from your portable
player or external device
17 - USB Connection
17 - Antenna Connection

T_bleofConfenfs5
3Operating
18 Basic Operations
18 - CD/USB Operations
18 - Selecting a folder and
an MP3/WMA file
19 - Deleting an MP3/WMA file
20 Playback effect
20 - SMART DJ playback
21 - DJ EFFECT
22 - DJ Pro.
22 - AUTO DJ playback
23 - dUKE BOX Playback
(Program play)
24 Using a Bluetooth wireless technology
24 - Listening to music stored on the
Bluetooth devices
25 - Using Bluetooth App
26 - NFC
27 - Activate Bluetooth with "LG Bluetooth
Remote" App
27 Radio Operations
27 - Listening to the radio
27 - Improving poor FM reception
28 - Presetting the Radio Stations
2S - Deleting all the saved stations
28 Other Operations
28 - Turn off the sound temporarily
28 - Displaying file information
(ID3 TAG)
2S - DEMO
29 - Using Microphone
29 - Switching on and off the speaker
lighting
29 - Using X-FLASH
30 Sound adjustment
30 - Setting the surround mode
30 - Setting the USER EQ
31 Setting the Clock
31 - Setting the Clock through "LG
Bluetooth Remote" App
31 - Using your player as an alarm clock
32 - Sleep Timer Setting
32 - Dimmer
32 - Auto power down
33 Advanced Operations
33 - Recording to USB
4 Troubleshooiing
35 Troubleshooting
35 - General
5 Appendix
36 Trademarks and Licenses
37 General specifications
38 Speakers specifications
39 Maintenance
39 - Notes on Discs
39 - Handling the Unit

6Getting Started
©
g
Unique Features
Bluetooth ®
Listens to music stored on your bluetooth device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
Playback effects
Listens to music with various sound and playback
effects.
USB Direct Recording
Records music to your USB device.
LG Bluetooth Remote
LG Bluetooth Remote is an App designed to let you
take control of some of LG's latest Audio devices.
Refer to the page 25-27.
Accessories
Please check and identify the supplied accessories.
FM Antenna (1) Remote Control (1)
Batteries (2)

GellingSlatted7
Playable file
Requiremenf
MP3/WMA music file
requiremenf
MP3/WMA file compatibility with this unit is limited
as follows.
• Sampling frequency :within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
Bit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
Maximum files : Under 999
Maximum folders : Under 99
File extensions :".mp3"/".wma"
CD-ROM file format :lSO 9660/JONET
We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
You have to set the disc format option to [Mastered]
in order to make the discs compatible with the LG
players when formatting rewritable discs. When
setting the option to Live File System, you cannot
use it on LG players.
[Mastered/Live File System : Disc format system for
Windows Vista)
Compafible USB Devices
* MP3 Player : Flash type MP3 player.
USB Flash Drive :
Devices that support USB2.0 or USB1.1.
The USB function of this unit does not support
all USB devices.
USB device requiremenf
* Devices which require additional program
installation when you have connected it to a
computer, are not supported.
Do not extract the USB device while in operation.
For a large capacity USB,it may take longer than
a few minute to be searched.
.To prevent data loss, back up all data.
* If you use a USB extension cable or USB hub, the
USB device is not recognized.
* Using NTFS file system is not supported. (Only
FA](16/32) file system is supported.)
* This unit is not supported when the total
number of files is I 000 or more.
* External HDD, Card readers, Locked devices, or
hard type USB devices are not supported.
.USB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
. Some USB may not work with this unit.
©
g

8 Geffin 9 Sfa_fed
©
g
Remote control
I=@ @
L
L ___
F C:D E:_ IBD
C_2]E:D E:D
[]
L(:3_1E::_ !
F=_--
••••••••••[] °_•••••••
Ca (Power) :Switches the unit ON or OFR
(Open/Close) :Opens and closes the disc tray.
PRESET.FOLDER A/V :
- Searches for a folder of MP3/WMA files. When
a CD/USB containing MP3/WMA files in several
folders is being played, press PRESETFOLDER
A/V to select the folder you want to play.
- Chooses a preset number for a radio station.
FUNCTION, Selects the function and input source.
MUTE ]_ : Mutes the sound.
VOL +/- : Adjusts speaker volume.
TUNER MEMORY :
- Stores radio stations.
- Deletes all the saved stations.
USB REC : USB direct recording.
SLEEP : Sets the system to turn off automatically at
a specified time.
(Dimmer :The display window will be darkened by
half.)
Battery Installation
Remove the Battery cover on the rear of the
Remote Control, and insert two (size AAA) batteries
with 0 and O matched correctly.

°°°°°°°°°°_'_ °°°°°°°°°
REPEAT (MENU) :Listens to your tracks/files
repeatedly or randomly.
TUNING-l+ : Selects the radio stations.
I_"_/lb,'_l (Skip/Search) :
- Skips Fast backward or Forward.
- Searches for a section within a track/file.
[] ENTER :
- Stops playback or recording.
Gelling St"art"ed 9
- Cancels DELETEfunction.
I_III (Play/Pause) :
- Starts or pauses playback.
- Selects STEREO/MONO.
SOUND EFFECT : Chooses sound impressions.
AUTO DJ : Selects the AUTO DJ mode. (For more
information refer to the page 22)
DELETE :
- Deletes MP3/WMA files.
- Deletes a song on JUKE BOX list.
°°°°°°°°°°_J °°°°°°°°°
0 to 9 numerical buttons :Selects numbered tracks,
files, or preset number.
INFO : Sees informations about your music. An MP3
file often come with ID3 tag.The tag gives the Title,
Artist, Album or Time information.
-k : The button is not available for any function.
°°°°°°°°°°[] °°°°°°°°°
CLOCK : For setting the clock and checking the
time.
TIMER :With theTIMER function you can turn CD,
USB play and TUNER reception on or off at a desired
time.
SET : Confirms the setting.
SMART DJ : Selects SMART DJ mode. (For more
information refer to the page 20)
JUKE BOX :
- Selects JUKE BOX mode.
- Makes your favorites list.
SMART DJ LEVEL +/- : Adjusts SMART DJ effect
sound level.
©

I0 Getting Started
Front panel
©
g
[] (Z)/I (Power)
[] DJ EFFECT
Selects DJ effect. (For more informaion refer to
the page 21).
[] SMART DJ
Selects SMART DJ mode. (For more information
refer to the page 20)
[] DJ EFFECT CONTROL
Makes a sound on DJ effect mode.
SMART DJ LEVEL
Adjusts the Smart DJ Level.
AUTO OJ
Selects the AUTO DJ mode. (For more
informaion refer to the page 22).
JUKE BOX
- Makes your favorites list.
- Switches on and offJUKE BOX.
[] _ (Open/Close)
[] Disc tray
_'1 PORT. IN jack
MICjack
MIC VOL
[]@
NFC allows you to install and open'LG
Bluetooth Remote'app to NFC-enabled phone.
[] Display.
i'll CD
Selects the CD function.
USB
Selects the USB function.
AUX IBLUETOOTH IMIC. IPORT. IN
Selects BLUETOOTH, AUX and MIC, PORT. IN
function.
TUNER
Selects the TUNER function.
DJ Pro.
Selects CLUB or FOOTBALL Sound function to
mix. (For more informaion refer to the page 22).
[] DJ Pro.
- DJ Pro. Key to select the 6 kinds of sound.
- DJ Pro mode on the CLUB, the Key mapping
the CLUB sound effect playback.
- DJ Pro mode on the FOOTBALL, the Key
mapping the FOOTBALL sound effect playback.

Getting Started 11
.
©
[] >11
- Starts or pauses playback.
- Selects Stereo/Mono.
[]
Stops playback or cancels DELETE function.
14</>>1
- Skips Fast backward or Forward.
- Searches for a section within a track/file.
MASTER VOLUME
Adjusts speaker volume.
BASS /TREBLE
Adjusts the sound level when setting USER EQ.
SPK LIGHTING /DEMO
-Turn on/off the lighting effects.
- Shows demo.
(SPK LIGHTING:The red LED lights up of the
inside Of Sub Woofer Speaker.)
USER EQ
Controls sound register.
[] _ USBREC
Records to USB.
[] USB 1/2 Port
You can play or record sound files by
connecting the USB device.
[] LG EQ
Chooses sound impressions.
BASS BLAST
Selects the BASS BLASTor BYPASSsound
directly.
[] ENTER
Selects a folder when searching a file.
[] MULTI JOG /FILE SEARCH
- Sets the clock time.
- Selects a folder and a file on CD/USB function.
[] X-FLASH LEVEL
- Selects a X-FLASH mode.
[] X-FLASH ON /OFF
- Selects a X-FLASH ON /OFF mode.
(X-FLASH :The white LED lights up of the front
Of Sub Woofer Speaker.)
[] FOLDER
Moves to folder and file in selection mode.
DELETE
-Deletes a song on JUKE BOX list.
-Deletes MP3/WMA files. (USB only)

12 GettingSfa_'fed
Rear panel []
©
g
[] Power cord
_i_ Caution
Connect the power cord to wall outlet
directly if possible. Or when you use an
extension cable, it is highly recommended
to use an extension cable of 110 V/15 A
or 230 V /15 A, otherwise the unit may not
operate properly because of the lack of
power supply.
Do not overload the extension cord with
excessive electrical load.
[] AUX IN 112 connectors (L/R)
ANTENNA (FM)
[] SPEAKER LIGHT
RIGHT SPEAKER
LOW CHANNEL 0/0
Connects banana plugs.
HIGHCHANNELO/0
Connects speaker's cables.
[] Cooling fan
[] LEFT SPEAKER
LOW CHANNEL @/0
Connects banana plugs.
HIGH CHANNEL (_/0
Connects speaker's cables.

Connecting 13
Connecting to
speakers
Connect the black stripe of each wire to the
terminals marked - (minus) and the other end to
the terminals marked + (plus).
cable
Attaching the high channel
speakers fo the unit
1. Loosen the knob by turning it counterclockwise.
2. insert the bare part of the wire into the hole in
side of each terminal
3. Tighten the knob by turning it clockwise to
secure the wire.
Banana
plug
Banana
plug
J
Cable _HIGH CHANNEL
Black stripe Connect to O
Transparent Connect to (_
Affaching fhe low channel
speakers fo fhe unif
1. Remove a protective cab.
2. insert the banana plug into the corresponding
terminal.
d_
o
©
5"
Q
Ba.a.apl_g LOWCHANNEL
Black Connect to 0
Red Connect to O

14 Connecting
d_
o
©
Attaching the speaker light
cables to the unit
To connect the speaker light cable to the unit,
insert the cable to SPEAKER LIGHT connectors on
the unit.
SPEAKER LIGHT
j._ Caufion
'_ ake sure that the jacks and the speakers
are matched correctly.
Make sure to connect the cables to
connectors tightly on the unit.
.- j._ Caution
* Do not try to lift the speaker alone. It needs
two persons to lift the speaker. Otherwise
it may result in the speaker malfunction
and cause personal injury and/or property
damage.
When you connect the speakers to the unit,
make sure to connect the speaker's cable
and plug to the corresponding speaker
terminal.
* The speakers must be placed at a distance
of about 20 cm from the unit for preventing
the vibration caused by the speakers.
20 cm 20 cm
Check the volume level before playing
music to prevent infirm, child, and pregnant
women from being shocked by the sudden
and loud sound from the unit.
Do not use the unit in a limited space.
It may damage a person's hearing. It is
recommended to use it in a wide space.
• Be careful to make sure children not to put
their hands or any objects into the opening
speaker LED cover.
The speakers contain magnet parts, so color
irregularity may occur on theTV screen or
PC monitor screen. Please use the speakers
far away from either TV screen or PC
monitor.
• Make sure to install the speaker with other
people in order to prevent it from falling
and causing injuries to the installer.
Be carefully look at speaker lights at a long
time. It may cause damage to eyesight.

Connecting15
Stacking the speakers
You can listen to the best sound quality when you
stack the speakers. Refer to the below.
Before stacking
You have to position the unit and the speakers
before connecting the speakers. Note that the
illustrations below are differ from the actual unit.
Stacking the speakers
1.You install SWF(Subwoofer) SPKon a fiat surface.
(It is recommended that at least two people to
carry by left and right handle (C)).
2. As shown below, FRONT SPKplace on
SWF(Subwoofer) SPK.
3.FOOT(A) of FRONTSPKis mounted on the top of
the guide hole (B)of SWF(Subwoofer) SPK.
(A)
d)
o
©
5"
Q
SPK
- _._ Caution
• install the speakerson afirm surface not to
slide.
•Ifthe speakersDON'T install on firm surface
or FOOT(A)of FRONTSPKisNOTmounted
appropriately on the top of the guide hole
(B)of SWF(Subwoofer)SPK,the vibration
caused by the strong output can shakeand
move the speakersand make noise.

16 Connecting
C_
©
©
Optional Equipment
Connection
AUX IN Connection
Connect an output of auxiliary device(Camcoder,
TV, Player, etc) to the AUX IN 1/2 (L/R) connector.
If your device has only one output for audio(mono),
connect it to the left (white) audio jack on the unit.
/
_r Audio cable
\
Ioooo
DVD, Biu-ray player etc.
PORT. IN Connection
Connect an output (earphone or line out) of
portable device (MP3 or PMP etc) to the
PORT. IN connector.
....'k> u/,ll,_l/\_ ,j ,,
_ c3c3c3 _- ,,
_, ©©©o_, \,
Portable cable
i/
MP3 player etc.
Lisfening fo music from your
porfable player or exferna[
device
The unit can be used to play the music from many
types of portable player or external device.
1. Connect the portable player to the PORT. IN
connector of the unit.
Or
Connect the external device to the AUX IN
connector of the unit.
2. Turn the power on by pressing C.])/J.
3. Select the PORTABLE or AUX function by
pressing FUNCTION on the remote control or
AUX /BLUETOOTH /MIC. /PORT. IN on the
unit.
4. Turn on the portable player or external device
and start it playing.

Con_ecfing l?
USB Connect'ion
Connect a USB device (or MP3 [)layer, etc.) to the
USB ports on the unit.
USBdevice
r-qr-q r-q
_@Note
Removing the USB device from the unit :
1. Choose a different function/mode or
press [] ENTER on the remote control
or [] on the unit twice in a row.
2. Remove the USB device from the unit.
Anfenna Connecfion
Connect the supplied FM antenna for listening to
the radio.
Connect the FM wire antenna to the FM antenna
connector.
Be sure to fully extend the FM wire antenna.
FM
®d
J
FM antenna
d_
o
©
5"
Q

0
18 OperafMg
Basic Operations
CD/USB Operations
1. k_sert the disc by pressing =_ or connect the
USB device to the USB port.
2. Select the CD or USB function by pressing CD or
USB on the unit or FUNCTION on the remote
control.
To
Stop
Playback
Pause
Searching
for a section
within a track/
file
Selecting
a track/file
directly
Skipping to
the next/
previous
track/file
Playing
repeatedly or
randomly
Do this
Press m ENTER on the remote
control or [] on the unit.
Press I_/1! on the remote control
or>11onthe unit.
Press I_/1! on the remote control
or >ll on the unit during playback.
Press I_/ID,€_I on the remote
control or ]<_/_*_] on the unit
during playback and release it at
the point you want to listen to.
Press 0 to 9numerical buttons on
the remote control to go to the
desired file or track directly.
During playback,
(1) By using 141t_I/DH_I buttons:
Press I_/DH_I to go to the
next track/file or to return to the
beginning of the current track/file.
Press I_t._ twice briefly to step
back to the previous track/file.
(2) By using FILE SEARCH knob :
Rotate FILE SEARCH on the unit
and press I_/1! to play the track/
file.
Press REPEAT(MENU) on the
remote control repeatedly. Refer
to the note for details about the
display change.
®
USB
REPEATTRK
REPEAT_DIR
REPEATALL
RANDOM
OFF
@ Note
The display changes in the following order.
MP3 MACD
REPEATTRK
REPEATDIR
REPEATALL
RANDOM
OFF
A_diOCD
REPEATTRK
REPEATALL
RANDOM
OFF
_DIR : Directory
When you play JUKE BOX list, only REPEAT
TRK and REPEATALL are available.
Even after restarting the unit or switching
one function to another, you can listen to
music from the point where it's last been
played.
The next file name is displayed every 30
seconds. (Except RANDOM play, AUTO DJ
RANDOM play, the last file of playlist, etc.)
Ifyou leave the disc tray open for 5 minutes,
it will dose automatically.
, The DTS is not supported. In case of DTS
audio format, audio is not output.
Selecting afolder and
an MP3/WMA file
On the unit
1. Press FOLDER and rotate FILE SEARCH until a
desired folder appears.
2. Press ENTER and rotate FILE SEARCH until a
desired file appears. Press ,_]] to play it.
On the remote control
1. Press PRESET.FOLDER A/V repeatedly until a
desired folder appears.
2. Press I_/ll to play it.The first file of folder will
play.

Operating19
._ @ Note
• CD/USBFolders/Filesarerecognized as
below.
_FOI DER
B ILE
--_HIE4
I _ FILE 1
I _ FILE 2
If there is no file in a folder, the folder win
not appear.
Folders win be presented as the following
order;
ROOT--> FOLDER 1 --> FOLDER 3 --> FOLDER
7 --> FOLDER 8 --> FOLDER 5 --> FOLDER 6
File win be played from .!_ file No.1 to .!_ file
No.14 one by one.
Files and folders win be presented in order
recorded and may be presented differently
according to the record circumstances.
_ROOT :The first screen you can see when a
computer recognize the USB is"ROOT".
Delet"ing an MP3/WMA file
You can delete file, folder or format by pressing
DELFEThis function is supported only in stop
status. (USB only)
1. -Select the file you want to delete and press
DELETE.
-Select the folder you want to delete by
pressing FOLDER and rotating FILE SEARCH
and press DELETE.
-Press and hold DELETE to format the USB
device.
Or
Press DELETE repeatedly during selecting the
MP3/WMA file.
The display changes in the following order.
- DELFILE?:Deletesfile
- DELFOLDER?:Deletesfolder
- FORMAT?:Formats USB
2.
3.
To delete file/folder or format, press I_/II on the
remote control or press ,_H on the unit.
If you want to exit the current mode, press
[] ENTER on the remote control or press [] on
the unit.
j._ Caution
Do not extract the USB device during
operation. (play, delete, etc.)
Regular back up is recommended to
prevent data loss.
The delete function may not be supported
according to the USB status. (lock, etc.)
0
@
5"
Q

O
20 Ope_ali_g
Playback effect
The unit supports various sound and playback
effects :SMARTDJ,AUTODJ,DJ EFFECT,andJUKE
BOXplayback.
SMART DJ playback
SMART DJ plays music with various sound and
playback effects : auto effect, cross fade, back spin,
loop, beat box, and voice sampling.
It plays repeatedly all the music in the USB device
and gives various effects randomly.
You can enjoy it with 3 types of genre : ELECTRO,
HOUSE and REGUETON. Press SMART DJ
repeatedly. The display window changes each time
you press SMART DJ as followings : SMART DJ OFF
-> SMART DJ ELECTRO -> SMART DJ HOUSE ->
SMART DJ REGUETON.
To cancel it, press SMART DJ repeatedly until
"SMART DJ OFF"appears on the display window.
You can listen to music as usual.
Adjusting the effect level
You can adjust SMART DJ effect sound level
between LOW, MIDDLE, and HIGH. As the effect
level moves from LOW to HIGH, SMART DJ effect
appears more frequently and makes the sound feel
more powerful.
On SMART DJ mode, rotate SMART DJ LEVEL
repeatedly on the unit or SMART DJ LEVEL +/- on
the remote control. The display window changes as
followings : MIDDLE -> HIGH -> LOW.
t-- @ Note
Find sound and playback effects below.
Effect
Auto effect Auto effect blends
various sound effects
to fit the mood
automatically. It includes
flanger, phaser, delay,
and chorus.
Cross fade It playbacks to
seamlessly fade from
one song into the
beginning of another.
Back spin It playbacks a section of
music fast in reverse.
Loop It repeats a section of
music.
Beat box It inserts a beat box
during playback.
Voice It inserts a sound during
sampling playback.
• SMART DJ is supported on USB or CD
function.
You can identi_ the effect by hearing the
sound, not by display window.
It is recommended to play only the certain
genres (ELECTRO, HOUSE, REGUETON) on
SMART DJ mode. SMART DJ is optimized to
enjoy that music.
If the function changes to the others or turn
offand on the unit on SMART DJ mode,
SMART DJ will be turned off.
Ifyou record your music you are listening
to on SMART DJ mode, SMART DJ will be
turned off.
If SMART DJ is turned off, you should turn it
on again to enjoy the effect.
It is impossible to operate SMART DJ, DJ
effect and AUTO DJ at the same time. If
you select one, another will be turned off
automatically.