LG DM5660K User manual

www.lg.com
*MFL69706804*
MODEL
DM5660K (DM5660K, DMS5660F, DMS5660W)
Please read this manual carefully before operating your set
and retain it for future reference.
OWNER’S MANUAL
DVD MINI HI-FI
SYSTEM

1 Getting Started
Getting Started2
Getting Started
1
Safety Information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning ash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufcient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus should not be exposed to
water (dripping or splashing) and no objects lled
with liquids, such as vases, should be placed on the
apparatus.
WARNING: Do not install this equipment in a
conned space such as a book case or similar unit.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a built-
in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specied herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specication page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or re. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance. The Power Plug is the disconnecting
device. In case of an emergency, the Power Plug must
remain readily accessible.

Getting Started 3
Getting Started
1
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the battery
from the equipment: Remove the old battery or
battery pack, follow the steps in reverse order than
the assembly. To prevent contamination of the
environment and bring on possible threat to human
and animal health, the old battery or the battery
put it in the appropriate container at designated
collection points. Do not dispose of batteries or
battery together with other waste. It is recommended
that you use local, free reimbursement systems
batteries and accumulators. The battery shall not be
exposed to excessive heat such as sunshine, re or
the like.
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
Symbols
~ Refers to alternating current(AC).
0Refers to direct current(DC).
Refers to class II equipment.
1Refers to stand-by.
!Refers to “ON” (power).
Refers to dangerous voltage.

Table of Contents4
Table of Contents
1 Getting Started
2 Safety Information
6 Unique Features
6 – Full HD up-scaling
6 – BLUETOOTH®
6 – USB Direct Recording
7 Introduction
7 – Playable Discs
7 – About the “7” Symbol Display
7 – Symbols Used in this Manual
7 – Regional Codes
8 Playable file Requirement
8 – Music file requirement
8 – Photo file requirement
8 – Video file requirement
9 Remote control
9 – Replacement of battery
10 Front panel
11 Rear panel
2 Connecting
12 Attaching the speakers to the unit
13 Connections to your TV
13 – HDMI Connection
14 – Video Connection
15 – Resolution Setting
15 Video Output Resolution
16 Optional Equipment Connection
16 – AUX (L/R) INPUT Connection
16 – USB Connection
3 System Setting
18 Adjust the setup settings
18 – OSD Initial language settings - Optional
18 – To display and exit the Setup menu
19 – Language
19 – Display
20 – Audio
21 – Lock (Parental Control)
4 Operating
22 Using the Home Menu
22 Basic Operations
24 Using a BLUETOOTH® wireless technology
24 – Listening to music of a BLUETOOTH device
26 Radio Operations
26 – Listening to the radio
26 – Improving poor FM reception
26 – Presetting the Radio Stations
26 – Deleting all the saved stations
26 – Deleting a saved station
27 Advanced Operations
27 – Displaying Disc Information on-screen
27 – To display the DVD Menu
27 – To display the DVD title
27 – 1.5 times speed playback
27 – Screen Saver
27 – Starting play from selected time
27 – Resume playback
28 – Changing subtitle code page
28 – Marked Playback
29 – Viewing a PHOTO file
30 Sound adjustment
30 – Setting the surround mode
31 – Recording to USB
32 Other Operations
32 – Sleep Timer Setting
32 – Dimmer
32 – Turn off the sound temporarily
32 – Last Scene Memory
32 – Power Resume - Optional
32 – System Select - Optional
33 – VOCAL FADER
33 – Using Microphone
34 Setting the Clock
34 – Using your player as an alarm clock
35 Auto power down
35 – AUTO POWER On
35 – Auto function change

Table of Contents 5
1
2
3
4
5
6
5 Troubleshooting
36 Troubleshooting
6 Appendix
38 Maintenance
38 – Handling the Unit
38 – Notes on Discs
39 Area Code List
40 Language code List
41 Trademarks and Licenses
42 Specifications

Getting Started6
Getting Started
1
Unique Features
Full HD up-scaling
Views Full HD picture quality with simple setup.
BLUETOOTH®
Listens to music stored on your Bluetooth device.
USB Direct Recording
Records music from CD to your USB device.

Getting Started 7
Getting Started
1
Introduction
Playable Discs
This unit plays DVD±R/RW and CD-R/RW that
contains audio titles, MP3, WMA and/or JPEG les.
Some DVD±RW/DVD±R or CD-RW/CD-R cannot be
played on this unit due to the recording quality or
physical condition of the disc, or the characteristics of
the recording device and authoring software.
DVD-VIDEO (8 cm/12 cm disc)
Discs such as movies that can be
purchased or rented.
DVD±R (8 cm/12 cm disc)
Video mode and nalized only.
DVD-RW (8 cm/12 cm disc)
Video mode and nalized only.
DVD+R: Video mode only
Supports the double layer disc also.
DVD+RW (8 cm/12 cm disc)
Video mode and nalized only.
Audio CD: Music CDs or CD-R/CD-
RW in music CD format that can be
purchased.
About the “7” Symbol Display
“7” may appear on your TV display during operation
and indicates that the function explained in this
owner’s manual is not available on that specic
media.
Symbols Used in this Manual
rDVD-Video, DVD±R/RW in Video
mode or VR mode and nalized
tAudio CDs
yVideo les contained in the USB/
Disc
uAudio les contained in the USB/
Disc
iPhoto les contained in the USB/
Disc
, Note
Indicates special notes and operating features.
, Tip
Indicates tip and hints for making the task easier.
> Caution
Indicates cautions for preventing possible damages
from abuse.
Regional Codes
This unit has a regional code printed on the unit. This
unit can play only DVD discs labeled same as the unit
or “ALL”.
yMost DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your unit’s regional code or
the disc cannot play.
yIf you try to play a DVD with a different regional
code from your unit, the message “Check Regional
Code” appears on the TV screen.

Getting Started8
Getting Started
1
Playable file
Requirement
Music file requirement
MP3/ WMA le compatibility with this unit is limited
as follows :
ySampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yBit rate : within 32 to 320 kbps (MP3),
40 to 192 kbps (WMA)
ySupport Version : v2, v7, v8, v9
yMaximum les : Under 999
yFile extensions : “.mp3”/ “.wma”
yCD-ROM le format : ISO9660/ JOLIET
yWe recommend that you use Easy-CD Creator,
which creates an ISO9660 le system.
yYou have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live File System,
you cannot use it on LG players.(Mastered/ Live
File System : Disc format system for Windows
Vista)
The DTS is not supported. In case of DTS audio
format, audio is not output.
Photo file requirement
Photo le compatibility with this unit is limited as
follows :
yMax pixel in width : 2760 x 2048 pixel
yMaximum les : Under 999
ySome discs may not operate due to a different
recording format or the condition of disc.
yFile extensions: “.jpg”
yCD-ROM le format : ISO9660/ JOLIET
Video file requirement
Video le compatibility with this unit is limited as
follows :
yAvailable resolution: within 720 x 576 (W x H)
pixels.
yThe le name of the Video subtitle should be
entered within 45 characters.
yIf there is impossible code to express in the Video
le, it may be displayed as “ _ “ mark on the display.
yFrame rate : less than 30 fps.
yIf the video and audio structure of recorded les is
not interleaved, either video or audio is outputted.
yPlayable Video le : “.avi”, “.mpg”, “.mpeg”
yPlayable Subtitle format : SubRip (*.srt/ *.txt),
SAMI (*.smi), SubStation Alpha (*.ssa/ *.txt),
MicroDVD (*.sub/ *.txt), SubViewer 2.0 (*.sub/
*.txt), Vobsub (*.sub)
yPlayable Codec format :
“Xvid”, “MPEG-1”, “MPEG-2”
yPlayable Audio format : “AC3”, “PCM”, “MP3”,
“WMA”
ySampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yBit rate : within 32 to 320 kbps (MP3), 40 to 192
kbps (WMA)
yFor Discs formatted in Live le system, you can not
it on this unit.
yIf the name of movie le is different from that of
the subtitle le, during playback of a Video le,
subtitle may not be display.
yIf you play a Xvid le differ from Xvid spec, it may
not operate normally.
yIf you play GMC video le which is more than
1-warp point, video playback screen will not
smooth.

Getting Started 9
Getting Started
1
Replacement of
battery
Remove the battery cover on the
rear of the remote control, and
insert the battery with 4and 5
matched correctly.
• • • • • • • • • a • • • • • • •
1(Standby/On) :Switches the
unit ON or OFF.
B(Open/Close) :Opens and closes
the disc tray.
PFUNCTION : Selects the
function and input source.
SLEEP : Sets the System to turn
off automatically at a specied
time.
(Dimmer : The display window will
be darken by half.)
MARKER : Marks play list.
nHOME : Displays the [Home
Menu].
• • • • • • • • • b • • • • • • •
mINFO/DISPLAY :Accesses On-
Screen Display.
DISC MENU : Accesses the menu
on a DVD disc.
W/S/A/D (Up/Down/Left/
Right) : Used to navigate on-screen
displays.
PRESET (W/S): Selects
programme of Radio.
TUNING +/- : Tunes in the desired
radio station.
bENTER : Acknowledges menu
selection.
Presetting the radio stations.
x RETURN :Moves backwards
in the menu or exits the setup
menu.
TITLE : If the current DVD title has
a menu, the title menu appears
on the screen. Otherwise, the disc
menu may not appear.
• • • • • • • • • c • • • • • • •
Z(Stop) : Stops playback.
d(Play) MONO/STEREO :
-Starts playback.
-Selects Mono/Stereo.
M(Pause) : Pauses playback.
C/V (Skip) : Goes to the
next or previous chapter/track/le.
c/v (Scan) : Searches
backward or forward.
• • • • • • • • • d • • • • • • •
REGION EQ : Chooses sound
impressions.
9SOUND EFFECT : Selects a
sound effect mode.
VOL -/+ (Volume) : Adjusts speaker
volume.
(Mute) : Mutes the sound.
XREC : USB Direct Recording.
0-9 numerical buttons : Selects
numbered options in a menu.
hREPEAT : Selects a play
mode. (Repeat/Random)
CLEAR : Removes a number when
setting the password.
• • • • • • • • • e • • • • • • •
TV Control buttons :Controls the
TV. (LG TV only)
-You can control the sound
level, input source, and power
switching of LG TVs as well.
Hold 1(TV) and press PR/CH
(w/s) button repeatedly until
the TV turns on or off.
CLOCK : Sets a clock and checks a
time.
ALARM : With the ALARM
function you can turn CD, USB play
and Tuner reception on at a desired
time.
VOCAL FADER :You can enjoy the
function as karaoke, by reducing
singer vocal of music in the various
source.
MIC VOL -/+ (Microphone Volume)
:Adjusts microphone volume.
ECHO VOL -/+ (Volume) :Adjusts
echo volume.
SET : Conrms the setting.
?: This button is not available.
Remote control

Getting Started10
Getting Started
1
Front panel
aDisplay window
b1/!(Standby/On)
Turn the power on or off.
cU(Skip/Search)
-Skips to the next track/le/chapter.
-Tune in the desired radio station.
dB. BLAST (Bass Blast)
Press to select BASS effect directly.
eY(Skip/Search)
-Skips to the previous track/le/chapter.
-Tune in the desired radio station.
fMIC VOLUME (Microphone Volume)
Adjust Mic volume.
gDisc tray
hUSB Port
You can play sound les by connecting the USB
device.
i FUNCTION
Select the function and input source.
jz(Play/Pause)
-Start or pause playback.
-Select Stereo/Mono.
k REGION EQ
Choose region equalizer.
l R(Open/Close)
Open and close the disc tray.
mMIC (Microphone) jack
Connect a microphone.
nMASTER VOLUME
Adjust speaker volume.

Getting Started 11
Getting Started
1
aPOWER IN
bVIDEO OUT
Connects to a TV with video inputs.
cFM ANTENNA
Connects the FM wired antenna
dAUX IN (L/R)
Connects to an external source with 2 channel
audio outputs.
eHDMI
Connects to TV with HDMI inputs.
(Interface for digital audio and video)
fSPEAKERS terminal
Rear panel

2 Connecting
Connecting12
Connecting
2
Attaching the speakers
to the unit
To connect the cable to the unit, press each plastic
nger pad to open the connection terminals on the
unit. Insert the wire and release the nger pad.
Connect the black of each wire to the terminals
marked - (minus) and the other end to the terminals
marked + (plus).
Color Speaker Position
Orange Sub woofer Any front position
Red Front Front right
White Front Front left
yBe careful to make sure children do not put
their hands or any objects into the *speaker
duct.
*Speaker duct : A hole for plentiful bass
sound on speaker cabinet(enclosure).
yThe speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
yUse the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
yDo not press the diaphragm or the dust cap
of the speaker.
yDo not connect any other speaker except
subwoofer speaker to the subwoofer
connection terminal on the rear of the unit.
yUse the speaker supplied with this unit
only. Using any other speaker may cause
malfunction.
> Caution

Connecting 13
Connecting
2
Connections to your TV
Make one of the following connections, depending on
the capabilities of your existing equipment.
yDepending on your TV and other equipment
you wish to connect, there are various ways
you could connect the player. Use only one of
the connections described in this manual.
yPlease refer to the manuals of your TV, Stereo
System or other devices as necessary to
make the best connections.
, Note
yMake sure the unit is connected directly to
the TV. Tune the TV to the correct video input
channel.
yDo not connect your player via your VCR.
The image could be distorted by the copy
protection system.
> Caution
HDMI Connection
If you have a HDMI TV or monitor, you can connect it
to this unit using a HDMI cable (Type A, High Speed
HDMI™ Cable).
Connect the HDMI jack on the unit to the HDMI IN
jack on a HDMI compatible TV or monitor.
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Unit
TV
yYou can fully enjoy digital audio and video
signals together with this HDMI connection.
yWhen you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to 15.)
, Tip

Connecting14
Connecting
2
yChanging the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
the unit and then turn it on again.
yWhen the HDMI connection with HDCP is
not veried, TV screen is changed to black or
green screen or the snow noise may occur
on the screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yMake sure the unit is connected directly to
the TV. Tune the TV to the correct video input
channel.
> Caution
yIf a connected HDMI device does not accept
the audio output of the unit, the HDMI
device’s audio sound may be distorted or may
not output.
yWhen you connect a HDMI or DVI compatible
device make sure of the following:
- Try switching off the HDMI/DVI device and
this unit. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this unit.
- The connected device’s video input is set
correctly for this unit.
- The connected device is compatible with
720 x 480i (or 576i), 720 x 480p (or 576p),
1280 x 720p, 1920 x 1080i or 1920 x
1080p video input.
yNot all HDCP-compatible HDMI or DVI devices
will work with this unit.
- The picture will not be displayed properly
with non-HDCP device.
- This unit does not playback and TV screen
is changed to black or green screen or the
snow noise may occur on the screen.
yIf there is noise or lines on the screen, please
check the HDMI cable and use a higher
version cable than High Speed HDMI™ Cable.
yIf you use Bluetooth Function of the unit, the
audio is not output to HDMI.
, Note
Video Connection
Connect the VIDEO OUT jack on the unit to the video
in jack on the TV using a video cable.
You can hear the sound through the system’s
speakers.
Unit
TV
Yellow

Connecting 15
Connecting
2
Resolution Setting
The unit provides several output resolutions for
HDMI.
You can change the resolution using [Setup] menu.
1. Press
nHOME.
2. Use
W/S/A/D to select the [Setup] and
press bENTER. The [Setup] menu appears.
3. Use
W/S to select [Display] option then press
Dto move to the second level.
4. Use
W/S to select the [Resolution] option then
press Dto move to the third level.
5. Use
W/S to select the desired resolution then
press bENTER to confirm your selection.
If your TV does not accept the resolution you
have set on the player, you can set resolution to
480p (or 576p) as follows :
Press Zfor more than 5 seconds.
, Note
Video Output
Resolution
Displayed resolution in display window and outputted
resolution may different according to connection
type.
[HDMI] : 1080p, 1080i, 720p and 480p (or 576p)
and 480i (or 576i)
[VIDEO OUT] : 480i (or 576i)

Connecting16
Connecting
2
Optional Equipment
Connection
AUX (L/R) INPUT Connection
Connect an output of auxiliary device (Camcorder, TV,
Player, etc) to the AUX IN (L/R) connector.
If your device has only one output for audio (mono),
connect it to the left audio jack on the unit.
Unit Red
White
USB Connection
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the front of the unit.
Removing the USB Device from the unit.
1. Choose a different function mode or press
Ztwice in a row.
2. Remove the USB device from the unit.
, Note

Connecting 17
Connecting
2
Compatible USB Devices
yMP3 Player : Flash type MP3 player.
yUSB Flash Drive : Devices that support USB2.0 or
USB1.1.
yThe USB function of this unit does not support
some USB devices.
USB device requirement
yDevices which require additional program
installation when you have connected it to a
computer, are not supported.
yDo not extract the USB device while in operation.
yFor a large capacity USB, it may take longer than a
few minute to be searched.
yTo prevent data loss, back up all data.
yIf you use a USB extension cable or USB hub, the
USB device is not recognized.
yUsing NTFS le system is not supported.
(Only FAT(16/32) le system is supported.)
yThis unit is not supported when the total number
of les is 1,000 or more.
yExternal HDD, Card readers, Locked devices, or
hard type usb devices are not supported.
yUSB port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
ySome USB may not work with this unit.

3 System Setting
System Setting18
System Setting
3
Adjust the setup
settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 18 to 21.
OSD Initial language settings -
Optional
During the rst use of this unit, the initial language
setup menu appears on your TV screen. You must
complete initial language selection before using the
unit. English will be selected as the initial language.
1. Press 1/!on the unit or 1on the remote
control to turn the unit on. The language setup
menu will appear on the screen.
2. Use
W/S/A/D to select a language then
press bENTER.
The confirm menu will appear.
3. Use
A/D to select the [Enter] then press
bENTER to finish the language setup.
To display and exit the Setup
menu
1. Press
nHOME.
Displays the [Home Menu].
2. Select an [Setup] by using A/D.
3. Press
bENTER.
Displays the [Setup].
4. Press
nHOME or x RETURN to exit in the
[Setup] Menu.
About help menu for Setup
Menu Buttons Operation
w/s
Move W/S Moving to another
menu.
a
Move AMoving to previous level.
d
Move DMoving to next level
or selecting menu.
x
Close xRETURN To exit the [Setup]
menu.
b
Select bENTER To conrm menu.

System Setting 19
System Setting
3
Language
Menu Language
Select a language for the Setup menu and on screen
display.
Disc Audio / Disc Subtitle / Disc Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the disc
was recorded.
[Other]
To select another language, press numeric
buttons and then bENTER to enter the
corresponding 4-digit number according to the
language code list on the page 40.
If you enter the wrong language code, press
CLEAR.
[Off (for Disc Subtitle)]
Turns off Subtitle.
Display
TV Aspect
Select the screen aspect to use based on the shape
of your TV screen.
[4:3]
Select when a standard 4:3 TV is connected.
[16:9]
Select when a 16:9 wide TV is connected.
Display Mode
The Display Mode setting works only when the TV
Aspect mode is set to 4:3.
[Letterbox]
Displays a wide picture with bands on the upper
and lower portions of the screen.
[Panscan]
Automatically displays the wide picture on the
entire screen and cuts off the portions that do
not t. (If the disc/le is not compatible with Pan
Scan, the picture is displayed at Letterbox ratio.)
Resolution
Sets the output resolution of HDMI video signal.
Refer to “Resolution Setting” for details about the
resolution (page 15).
[Auto]
If the HDMI jack is connected to TVs providing
display information (EDID), automatically selects
the resolution best suited to the connected TV.
If VIDEO OUT is only connected, this changes
the resolution to 480i (or 576i) as default
resolution.
[1080p]
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
Outputs 720 lines of progressive video.
[480p (or 576p)]
Outputs 480 (or 576) lines of progressive video.
[480i (or 576i)]
Outputs 480 (or 576) lines of interlaced video.

System Setting20
System Setting
3
Audio
2.1 Speaker Setup
Make the following settings for the built-in 2.1
channel surround decoder.
1. Select [2.1 Speaker Setup] on the [Audio] menu.
2. Press
bENTER.
The [2.1 SPEAKER] appears.
3. Use
A/D to select the desired speaker.
4. Adjust options using W/S/A/D buttons.
5. Returns to the previous menu by pressing
xRETURN.
[Speaker]
Select a speaker that you want to adjust.
Certain speaker settings are prohibited by the
Dolby Digital licensing agreement.
, Note
[Size]
Since the speaker settings are xed, you cannot
change the settings.
[Volume]
Adjust the output level of each speaker.
[Distance]
Adjust the distance between each speaker and
the listening position.
[Speaker Test Start]
Select [Speaker Test Start] by using the W/S
and press bENTER.
Press bENTER again to stop.
Adjust the volume to match the volume of test
signals memorized in the system.
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [On] for this effect.
Vocal
Select [On] to mix karaoke channels into normal
stereo.
This function is effective for multi-channel karaoke
DVDs only.
HD AV Sync
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so that
it effectively ‘waits’ for the picture to arrive: this
is called HD AV Sync. Use W/S (on the remote
control) to scroll up and down through the delay
amount, which you can set at anything between 0
and 300ms.