LG 3828ER3024W User manual

DWG.
No.
TRIG.
DR COMPLETED
도면 DR 완료
완료일 : 04.09.09
LG 전자 (주)
LG Electronics Inc.
UNIT SCALE NS mm
REVIEWEDDESIGNED
RELATED DWG.
CHECKED APPROVED
김 효 진 류 재 철
05.07.25 05.07.26
MODELING I
T
L
E
T
APPROVED
승인자
PREPARED
시방자
DATE
년/월/일
REF. NO.
시방 번호
REV. NO.
기호
REVISION DESCRIPTION
변경 사항
1
2
3
4
RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
PDF
ILLUSTRATOR
220 220
280
3828ER3024W
MANUAL,OWNER’S
DRUM-EXPORT 1/1
3828ER3024W
<< 주기 >>
1. 재질, 인쇄방법, 인쇄도수, 외곽치수등은 작업표에 준한다.
2. 인쇄내용, 문자크기 및 형상, 선의 굵기 등은 설계에서 제시된 FILM에 준함.
3. 외곽치수는 절단후 치수임.
4. 양산전에 설계 한도를 득할 것.
5. 본 부품에 금지물질이 포함되지 않도록 하고, 상세내용은 LG(63)-A-5501-34를
만족할 것.
<< NOTES >>
1. Material, printing and exterior size are refer to work tables.
2. Printing, text size and line are based on LG design film.
3. Exterior size on the drawing is cutting line.
4. Before product controlled by criteria sample.
5. The part should not contain prohibited substances (Pb, Cd,
Hg, Cr+6, PBB, PBDE) and details should comply with LG
standard of LG(63)-A-5501-34.
가
P/NO. 다
<FRONT>
<BACK>
나
WORK
가
BRAND
LG
WD-1127*BD
WD-10270BD
WD-10272BD
WM2277H*
WM2077CW
WM2075CW
W
나
MODEL
3828ER3024W
다
P/NO.
SNOW WHITE 100g OFFSET 인쇄
MATERIAL AND PRINTING DESCRIPTION
1 1
PRINTING DEGREE
EXTERIOR INTERIOR
LG MODEL 명
A**EEUS
SUFFIX
ENG/SPN
LANGUAGE
48
PAGE
MAYFLOWER-
US
REMARK
SEC.
설치문구 강화 및 내용 수정
모델명 추가
SVC TOLL FREE 번호 삽입
인쇄내용 변경-HE세제 사용강화
04.09.13
05.03.08
05.07.25
05.12.03
강정훈
강정훈
김효진
김효진
노양환
조한기
류재철
류재철
04R0W10669
04R0W02429
05R0W07214
AWCR510499
5
spanner 용도 설명 강화 06.02.03 김효진류재철
AWCR600758
6
통세척 코스 문구 추가 06.05.09 김효진류재철
AWCR602500
2
2

P/ No.:3828ER3024W

Owner's Manual
WM2277H*
WM2077CW
WM2075CW
Please read this manual carefully. It provides
instructions on safe installation, use, and maintenance.
Retain it for future reference.
Record the model and serial numbers of your machine
and report this information to your dealer if your machine
requires service.
Washing Machine
☎☎1-800-243-0000
24 HOURS A DAY, 7 DAYS A WEEK FOR LG CUSTOMER SERVICE

PRODUCT FEATURES
2
CONTENTS
■Direct Drive System
The advanced Brushless DC mo or direc ly drives he drum wi hou
bel and pulley.
■Tilted Drum and Extra Large Door Opening
Til ed drum and ex ra large opening make i possible o load
and unload clo hing more easily.
■Water Circulation (WM2277H*)
Spray de ergen solu ion and wa er on o he load over and over.
Clo hes are soaked more quickly and horoughly during wash cycle.
The de ergen suds can be removed more easily by he wa er shower
during rinse cycle. The wa er circula ion sys em uses bo h wa er and
de ergen more efficien ly.
■RollerJets (WM2277H*)
Washing ball enhances he wash performance and reduces damage
o he clo hing. The je s spray and help umble clo hes o enhance
washing performance while main aining fabric care.
■Automatic Wash Load Detection
Au oma ically de ec s he load and op imizes he washing ime.
■Built-in Heater (WM2277H*)
In ernal hea er helps o main ain wa er empera ure a i s op imum level for
selec ed cycles.
■Child Lock
The Child lock preven s children from pressing any bu on o change he
se ings during opera ion.
Impor an Safe y Informa ion ...........................................................................................................................................3
Specifica ions...................................................................................................................................................................4
Ins alla ion Ins ruc ions ....................................................................................................................................................5
Prepara ion Before Washing..........................................................................................................................................10
Using he Dispenser ......................................................................................................................................................11
Cycles ...........................................................................................................................................................................13
How o Use he Washer.................................................................................................................................................14
Main enance ..................................................................................................................................................................17
Troubleshoo ing Guide ..................................................................................................................................................20
Warran y ........................................................................................................................................................................23
추가선택, 예약,

IMPORTANT SAFETY INFORMATION
ENGLISH
3
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
For your safety, the information in this manual must be followed to minimize the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
IIMMPPOORRTTAANNTTSSAAFFEETTYYIINNSSTTRRUUCCTTIIOONNSS
• Read all instructions before using the washer.
• Do not wash articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry cleaning solvents, or other
flammable or explosive substances, as they give
off vapors that could ignite or explode.
• Do not add gasoline, dry cleaning solvents, or
other flammable or explosive substances to the
wash water. These substances give off vapors that
could ignite or explode.
• Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for 2 weeks or more. HYDROGEN GAS IS
EXPLOSIVE. If the hot water system has not been
used for such a period, before using the washing
machine, turn on all hot water faucets and let the
water flow from each for several minutes. This will
release any accumulated hydrogen gas. As the gas
is flammable, do not smoke or use an open flame
during this time.
• Do not allow children to play on or in the washer.
Close supervision of children is necessary when
the washer is used near children.
• Before the washer is removed from service or
discarded, remove the door to prevent children
from hiding inside.
• Do not install or store the washer where it will be
exposed to the weather.
• Do not tamper with controls.
• Do not repair or replace any part of the washer or
attempt any servicing unless specifically
recommended in the user-maintenance
instructions or published user-repair instructions
that you understand and have the skills to carry
out.
• See Installation Instructions for grounding
requirements.
• ALWAYS follow the fabric care instructions
supplied by the garment manufacturer.
• Do not place items exposed to cooking oil in your
washer. Items contaminated with cooking oils may
contribute to a chemical reaction that could cause
a load to catch fire.
• Do not use fabric softeners or products to
eliminate static unless recommended by the
manufacturer of the fabric softener or product.
WARNING : To reduce he risk of fire, elec ric shock, or injury o persons when using he washer, follow basic
precau ions, including he following:
SSAAVVEETTHHEESSEEIINNSSTTRRUUCCTTIIOONNSS
This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
• Do not use an adapter or extension cord.
• Do not remove ground prong.
• If you don’t have the proper outlet, consult an electrician.
GROUNDING INSTRUCTIONS
WARNING : Improper connec ion of he equipmen -grounding conduc or can resul in risk of elec ric shock.
Check wi h a qualified elec rician or serviceman if you are in doub as o whe her he appliance is
properly grounded. Do no modify he plug provided wi h he appliance - if i does no fi he ou le ,
have a proper ou le ins alled by a qualified elec rician.
!
!
!

for removing shipping bolts
and leveling the washer
Water Circulation Nozzle
(WM2277H*)
울
란제리 란제리
SPECIFICATIONS
4
■
Accessories
■Name: Front-loading Washing Machine
■Power su
supply: 12 V~ 6 Hz
■Size: 68.6 cm (W) X 75.6 cm (D) X 98.3 cm (H), 129.1 cm (D, door open)
27”(W) X 293/4”(D) X 3811/16”(H), 5 13/16”(D, door open)
■Weight: 19 lbs. (86 kg)
■Wash capacity: 3.22 cu. ft. (IEC: 3.72 cu. ft.)1)
■Spin speed: 11 rpm max. (WM2277H*), 1 5 rpm max. (WM2 75CW)
1 rpm max. (WM2 77CW)
■Permissible water pressure: 4.5 ~ 145 PSI (3 ~ 1 kPa)
󳢬Specifications subject to change by manufacturer.
1) Per IEC 6 456, washes the equivalent of a 3.72 cu. ft. agitator washer.

5
INSTALLATION INSTRUCTIONS
ENGLISH
1. To prevent internal damage during transport,
4 locking bolts are installed. Before operating
the washer, remove the bolts and braces.
• If they are not removed, it may cause severe
vibration, noise, and malfunction.
3. Take out the 4 bolts and braces by twisting
the braces slightly. Keep the 4 bolts, braces
and the wrench for future use.
• Whenever the appliance is transported, the
shipping bolts and braces must be reinstalled.
2. Unscrew the 4 bolts with the wrench supplied.
Do first lower side to remove easily. One of the
bolts retains the power cord of the washer to
prevent operating without removing bolts.
4. Close the holes with the caps supplied.
The appliance is fitted with shipping bolts to prevent
internal damage during transportation.
Packing and all shipping bolts must be removed
before using the washer.
󳢹When unpacking the base, be sure to remove
the additional packing support in the middle of
the base packing.
: Two or more people may be need to install and move the appliance.
■Shipping bolts
Install or store unit where it will not be exposed to temperatures below freezing or
exposed to outside weather conditions.
Properly ground washer to conform with all governing codes and ordinances.
To reduce the risk of electric shock, do not install the washer in humid spaces.
The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay
particular attention to keeping the appliance and its surroundings in clean condition at all times.
Damage caused by cockroaches or other vermin will not be covered by the appliance warranty.
■Removing shipping bolts
Wrench
cap
!
WARNING

INSTALLATION INSTRUCTIONS
6
■Installation clearances
The loca ion mus be large enough o fully open
he washer door.
■Washer dimensions
• Mos ins alla ions require a minimum 4 in.
(10 cm) clearance behind he washer.
■Minimum installation spacing for
recessed area installation.
The following dimensions shown are for he minimum
spacing allowed.
Addi ional spacing should be considered for
ins alla ion and servicing.
• Addi ional clearances migh be required for wall,
door and floor moldings.
• Addi ional spacing of 1 in. (2.5 cm) on all sides of
he washer is recommended o reduce noise
ransfer.
Companion appliance spacing should also be
considered.
■Level floor
• Allowable slope under en ire washer is 1°.
• To minimize noise and vibration, the washer
MUST be installed on a solidly constructed
floor.
• Carpe ing and sof ile surfaces are no
recommended.
• Never ins all he washer on a pla form or weakly
suppor ed s ruc ure.
NOTE: A firm, solid floor is even more critical to a
front-loading washer than to a top-loader.
If your floor is wood and/or frame
construction, you may need to reinforce it.
Front-loaders use substantially faster spin
speeds than top-loaders, causing greater
vibration. If the floor is not solid, your washer
will vibrate. You will hear and feel the
vibration throughout your house.
■Power outlet
• Mus be wi hin 60 in. (1.5 m) of ei her side of he
washer. Do no overload he ou le wi h more
han one appliance.
• Time-delay fuse or circui breaker is recommended.
NOTE: It is the personal responsibility and obligation
of the customer to have a proper outlet
installed by a qualified electrician.
[Front view]
[Side view]
27"
(68.6 cm)
29
3/4
"
(75.6 cm)
3811/16"
(98.3 cm)
50
13/16
"
(129.1 cm)
29
3
/4"
(75.6 cm)
4"
(10 cm)
27"
(68.6 cm)
1"
(2.5 cm)
1"
(2.5 cm)

INSTALLATION INSTRUCTIONS
ENGLISH
7
• Wa er supply pressure mus be be ween
4.5 and 145 PSI (30~1000 kPa).
• Do no cross hread when connec ing inle hose o
he valve.
• If he wa er supply pressure is more han 145 PSI,
a pressure reducing device should be ins alled.
• Two Sealing washers are supplied wi h he wa er
inle hoses o preven wa er leaks.
• Check for leakage of washing machine connec ions
by urning he ap comple ely on.
• Periodically check he condi ion of he hose and
replace he hose if necessary.
• Make sure ha here is no kink in he hose and ha
i is no crushed.
• Be sure ha he wo wa er inpu por s are connec ed
o he correc wa er fauce s. The connec or for ho
wa er is colored red.
■Connecting water supply hose
NOTE: Washing Machine is to be connected to the water mains using new hoses.
Old hoses should not be used.
■Electrical connection
• Do no use an ex ension cord or double adap er.
• If he supply cord is damaged, i mus be replaced by a qualified person in order o avoid a hazard.
• If he machine will no be used for an ex ended ime, unplug i and shu off he wa er supply.
• Connec he machine o a grounded ou le in accordance wi h curren wiring regula ions.
• The appliance mus be posi ioned so ha he plug is easily accessible.
Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center.
Do not install your washing machine in a room where temperatures below freezing may occur.
Frozen hoses may burst under pressure. The reliability of the electronic control unit may be impaired
at temperatures below the freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing,
store the washing machine at room temperature for a few hours before putting it into operation.

INSTALLATION INSTRUCTIONS
8
■Installation of drain hose
• The drain hose should no be placed higher han
96 in. from he bo om of he washer.
• Properly securing he drain hose will pro ec he
floor from damage due o wa er leakage.
• Place he end of he drain hose in he hole of he
floor drain sys em.
• When ins alling he drain hose a a sink, secure i
so i canno break away and cause flooding and
damage.
• Properly securing he drain hose will pro ec he
floor from damage due o wa er leakage.
This equipment is not designed for maritime use or for mobile installations such as in RV’s, aircraft, etc.
Turn off the faucet if the machine is to be left for an extended period of time (e.g. holiday).
When disposing of the appliance, cut off the power cable, and destroy the plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of suffocation! Keep all
packaging from children.

INSTALLATION INSTRUCTIONS
ENGLISH
9
■Level adjustment
• Leveling he washing machine properly preven s
excessive noise and vibra ion.
Ins all he appliance on a solid and level floor surface,
preferably in a corner of he room.
• If he floor is uneven, adjus he adjus able fee as
required. (Do no inser pieces of wood, e c. under he
fee .)
NOTE: Extend the feet no more than necessary to level
the washer. The more the feet are extended, the
more the washer will vibrate.
• Make sure ha all four fee are s able and res ing on
he floor and hen check ha he appliance is perfec ly
level (Use a level).
• Af er he washer is level, igh en he lock nu s up
agains of he base of he washer. All lock nu s mus
be igh ened.
• I is cri ical o adjus he fee perfec ly. This mus be
done while he washer is spinning wi h a load. Use he
wrench (supplied) o adjus he fee un il here is no
vibra ion. Then igh en he lock nu s o preven fur her
adjus men .
NOTE: If there are vibration and noise during the spin
cycle, re-check the leveling of the washer, adjust
the feet as required, and tighten the lock nuts
securely to prevent changes in adjustment.
Run the washer with a test load to make certain
your washer is properly leveled. Put
approximately 6 pounds of laundry in the
machine. Then, press POWER, RINSE+SPIN, and
START/PAUSE, in that order. When the machine
spins at high speed, verify that it is stable. If not,
adjust the feet accordingly.
󳢬Diagonal Check
When pushing down the edges of the washing machine
top plate diagonally, the machine should not move up
and down at all. (Please, check both directions.)
If the machine rocks when pushing the machine top plate
diagonally, adjust the feet again.
Adjustable feet Adjustable feet
L ck nut
Adjustable feet

PREPARATION BEFORE WASHING
10
1. Fabric Care Labels
Look for a care label on your clo hes. This will ell you abou he fabric con en of your garmen and how i should
be washed.
2. Sorting
To ge he bes resul s, sor clo hes in o loads ha can be washed wi h he same wash cycle.
Differen fabrics need o be washed in differen ways.
Always sor dark colors from pale colors and whi es. Wash separa ely as dye and lin ransfer can occur causing
discolora ion of whi e clo hing. If possible, do no wash heavily soiled i ems wi h ligh ly soiled ones.
Soil (Heavy, Normal, Light) Separate clothes according to amount of soil.
Color (White, Lights, Darks) Separate white fabrics from colored fabrics.
Lint (Lint Producers, Collectors) Wash lint producers and lint collectors separately.
3. Check before loading
Combine large and small i ems in a load. Load large i ems firs .
Large i ems should no be more han half he o al wash load.
Do no wash single i ems. This may cause an ou -of-balance load. Add one or wo similar i ems.
• Check all he pocke s o make sure ha hey are
emp y. Things such as clip, ma ches, pens,
coins, and keys can damage bo h your washer
and your clo hes.
• Close zippers, hooks, and s rings o make sure
ha hese i ems do no snag on o her clo hes.
• Pre rea dir and s ains by brushing a li le
de ergen dissolved in wa er on o s ains like
collars and cuffs o help lif dir .
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY
INSTRUCTIONS before operating this appliance.
NOTE: Do not wash or spin water-proof clothes.

USING THE DISPENSER
EN GLISH
11
The automatic dispenser consists of four compartments which hold 1) liquid chlorine bleach, 2) liquid fabric
softener, 3) liquid or powdered detergent for prewash and 4) liquid or powdered detergent
and color safe bleach for main wash.
All laundry products can be added at once in their respective dispenser compartments.
They will be dispensed at the appropriate time for most effective cleaning. After loading the laundry
additives into the dispenser, close the dispenser drawer.
Add detergent, bleach and fabric softener to the automatic dispenser following these steps:
1. Open the dispenser drawer.
2. Load the laundry products into the appropriate compartments.
3. Close the dispenser drawer.
■About detergent
• Add detergent to this compartment when using
the Prewash option. Liquid or powdered
detergent may be used in this compartment. The
detergent will automatically be dispensed during
Prewash if the Prewash option is selected.
• Add 1/2 the recommended amount of detergent
to the Prewash compartment and the
recommended amount of detergent to the main
wash compartment.
NOTE : Liquid detergent will drain into the washer
drum as it is added.
1. Prewash Detergent Compartment
Liquid Chlorine
Bleach
Compartment
Liquid Fabric
Softener
Compartment
Prewash
Compartment
Main Wash
Compartment
Your LG TROMM washer is designed to use only High Efficiency (HE) detergents.
HE detergents are formulated specifically for front load washers and contain suds reducing components.
HE detergents make less suds, improve washing and rinsing performance, and help to keep the interior
of your LG TROMM washer clean. Use the manufacture’s recommend amount.
If a regular detergent is used, it may cause oversudsing and unsatisfactory performance.
For the best washing and rinsing performance, low-sudsing HE detergents are strongly recommended.
Designed specially to use only
HE(High Efficiency) detergent

USING THE DISPENSER
12
• Add measured de ergen o his compar men for
Main wash. De ergen is flushed from he
dispenser a he beginning of he cycle. Ei her
powdered or liquid de ergen can be used.
• Liquid or powdered color-safe bleach may be
added o he main wash compar men along wi h
he same ype of liquid or powdered de ergen .
• When using liquid de ergen , make sure he liquid
de ergen box and inser are in place. Do no
exceed he maximum fill line.
• For powered de ergen , remove bo h he liquid
de ergen box and inser .
• Powdered de ergen will no dispense wi h he
liquid de ergen box and inser in place.
2. Main Wash Detergent Compartment
• Add measured liquid chlorine bleach o his
compar men . The bleach will be au oma ically
dispensed a he proper ime during he wash
cycle.
• Do no exceed he maximum fill line. Overfilling can
cause early dispensing of he bleach which could
resul in damaged clo hes.
• Do no pour undilu ed liquid chlorine bleach direc ly
on o he load or in o he drum. Fabric damage can
occur.
• Do no use powdered bleach in his compar men .
3. Liquid Bleach Compartment
• Add recommended amoun of fabric sof ener o
his compar men .
• Dilu e concen ra ed sof eners wi h warm wa er o
he fill line.
• Do no exceed he maximum fill line. Overfilling can
cause early dispensing of he fabric sof ener which
could resul in s ained clo hes.
• Do no pour fabric sof ener direc ly on he wash
load.
• The fabric sof ener will be au oma ically dispensed
during he las rinse cycle.
NOTE: Do not place, store, or spill laundry products
(soap, detergent, bleach, softener, etc.) on the
top of your washer or dryer. These products
can damage the finish or controls if left there
too long.
4. Fabric Softener Compartment
Liquid De ergen
Box
Inser
Designed specially to use only
HE(High Efficiency) detergent

CYCLES
ENGLISH
13
■Select cycles designed for different types of fabric and soil levels.
Warm/C ld
Extra high Extra high
N rmal
C ld/C ld
N spin Heavy
C tt n/ C tt n, linen,
Tap C ld/C ld
L w Light
OOOOO
T wels t wels, shirts,
sheets
H t/C ld
Medium
Warm/Warm
High
Warm/C ld High
High
N rmal
Mixed l ads,
C ld/C ld
Heavy
N rmal w rk cl thes,
Tap C ld/C ld N spin Light
OOOOO
O O
jeans, shirts
H t/C ld
L w
Warm/Warm
Medium
Dress shirts/ Warm/C ld Medium
Medium
N rmal
Perm pants, wrinkle free
C ld/C ld
Heavy
Press cl thing, p ly/ Tap C ld/C ld N spin Light
OOOOO
c tt n blend
H t/C ld
cl thing, table cl ths
Warm/Warm
L w
Dress shirts/ C ld/C ld N rmal
Delicates bl uses, nyl ns,
Tap C ld/C ld
Heavy
OO OO
sheer r Warm/Warm
N spin
Light
lacy garment
Warm/C ld
W lens, silk C ld/C ld N rmal
W l/ identified as
Tap C ld/C ld
L w L w
Light
OOO
Silk machine Warm/Warm
Medium
washable
Warm/C ld
N spin
C ld/C ld N rmal
Hand Items labeled
Tap C ld/C ld
L w
Light
OOO
Wash “hand washable” Warm/Warm
Medium
Warm/C ld
N spin
H t/C ld Extra high Light
Warm/Warm
N spin N rmal
Speed Lightly s iled
Warm/C ld
Heavy
OO
Wash cl thing
C ld/C ld L w
Tap C ld/C ld
Medium
High
Cycle Fabric type Wash/Rinse Spin speed Soil Pre-
Quick Stain Extra Rinse+
Te p. Level
Auto-Load
Detection
1
Wash
Cycle Cycle Rinse Spin
WM2277H*WM2077CW/WM2075CW
1) Au oma ic wash load (weigh ) de ec ion:
Au oma ically de ec s he load and op imizes he washing ime. Af er de ec ing, he es ima ed ime remaining in he cycle will be displayed.

HOW TO USE THE WASHER
14
• Rotate the Cycle selector knob to select cycle
designed for different types of fabric and soil
levels.
• Each cycle has a preset Water Temperature, Spin
Speed, Soil Level, and Option See page 13).
• The preset settings can be changed anytime
before Start.
NOTE: This front load washer requires longer cycle time
and gets clothes much cleaner, yet is more gentle
on the fabrics, than top load washers. Washing
time can be reduced significantly for small loads
or lightly soiled loads by selecting Quick Cycle
with the Option button and setting the Soil Level
button at Light.
2. Cycles
• Use this button to turn the Power On/Off.
1. Power
• Use this button to start/stop the washer.
3. Start/Pause
• Allows the start of any cycle to be delayed for
1~12 9, 8) hours.
• Choose the wash cycle for your load, and then
press the Delay Wash button once for one hour or
press the button again to increase the delay wash
time up to 12 9, 8) hours in one hour increments.
4. Delay Wash
■ WM2277H*
■ WM2077CW/WM2075CW

HOW TO USE THE WASHER
ENGLISH
15
• Cus om Program allows you o s ore a cus omized
wash cycle for fu ure use.
• To make a Custom Program:
1. Selec a cycle.
2. Selec Wash/Rinse Temperature, Spin Speed,
and Soil Level.
3. Selec o her desired Op ions.
4. Press and hold Cus om Program bu on 3
seconds (2 beep sounds).
The Cus om program is now s ored for fu ure
use. To reuse he program, selec Cus om
Program and press Start/Pause .
5. Custom Program
• Press repea edly o adjus he volume of he
Beeper.
9. Beeper
• Selec a wa er empera ure based on he ype of
load you are washing.
• Follow he fabric care label and char below for
bes resul s.
• Warm rinses leave he loads dryer han cold
rinses. Warm rinses increase wrinkling.
• In cold clima es, a warm rinse makes he load
more comfor able o handle.
• Cold rinses save energy.
• The Cold rinse empera ures depend on he cold
wa er a your fauce .
• Warm rinses are regula ed a approxima ely
86°F (30°C).
• For he Tap Cold/Cold se ing, bo h wash and rinse
empera ures depend on he cold wa er a your
fauce .
6. Wash/Rinse Temperature
• To change he spin speed, press he Spin Speed
bu on repea edly o cycle hrough available
op ions.
• To s ar Drain/Spin cycle:
1. Press Power bu on o urn on.
2. Press Spin Speed bu on only.
3. Press S ar /Pause bu on.
7. Spin speed
• To change he soil level, press he Soil Level
bu on repea edly un il he desired se ing is on.
8. Soil Level
Suggested Wash Temp. Garment
Ex ra Ho Ki chen owels, shee s,
167°F (75°C) and baby garmen s
Ho Whi es and Heavy
122°F (50°C) soiled color-fas i ems
Warm Mos loads
104°F (40°C)
Cold Brigh ly colored i ems,
77°F (25°C) washable woolens

HOW TO USE THE WASHER
OPTION
CHILD LOCK
DOOR LOCKED
16
• Use this option for loads that need pretreatment.
Adds 16 minutes prewash and drain.
1. Prewash
• Lights whenever the door of the washer is locked.
• The door can be unlocked by pressing the
tart/Pause button to stop the washer.
NOTE: If the water temperature or the level is too
high, the door cannot be unlocked.
Do not try to force the door open when
DOOR LOCKED lights on.
STATUS INDICATOR
• These lights show which portion of the cycle the
washer is operating.
EST. TIME REMAINING
• This display shows:
a) the estimated time remaining in the cycle when
operating,
b) the error code when an error has been
detected.
• Use this option to prevent unwanted use of the
washer. Press and hold PRE WA H button for 3
seconds to lock/unlock control.
• When Child lock is set, CHILD LOCK lights and all
buttons are disabled except the Power button.
You can lock the washer while it is operating.
• Adds time to the wash and rinse for better stain
removal.
• Automatically provides a rinse.
4. Stain cycle
• The Quick cycle offers a quick cycle time.
• uggested uses include freshening newly
purchased clothes, or clothing that has been
packed away.
5. Quick Cycle
• This option provides an additional rinse.
• Use this option to ensure the removal of detergent
or bleach residue from garments.
3. Extra Rinse
• Use this option to rinse and then spin.
2. Rinse+Spin

ENGLISH
17
MAINTENANCE
2
3
1
■The water inlet filter
• " " error message will blink on he con rol panel when wa er does no en er he dispenser.
• If your wa er is very hard or con ains races of lime deposi , he wa er inle fil er may become clogged.
We recommend cleaning i every few mon hs.
Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock hazards.
When disposing of the appliance, cut off the power cable, destroy the plug, and disable the door lock to prevent
young children from being trapped inside.
1. Turn off he
wa er ap.
2. Unscrew
he wa er
inle hose.
3. Clean he
fil er using
a hard
bris le
brush.
4. Tigh en
he inle
hose.
1. Open he lower cover cap 󳡉
wi h a ool such as coin.
Turn he drain plug 󳡊o pull
ou he hose.
2. Unplug he drain plug 󳡊,
allowing he wa er o flow ou .
A his ime use a vessel o
preven wa er from flowing
on o he floor. When wa er does
no flow any more, urn he
pump fil er 󳡋open o he lef .
3. Remove any foreign objec s from
he pump fil er 󳡋. Af er cleaning,
urn he pump fil er 󳡋clockwise
and inser he drain plug 󳡊o he
original place. Close he lower
cover cap󳡉.
■The drain pump filter
• The drain fil er collec s hreads and small objec s lef in he laundry.
Check regularly ha he fil er is clean o ensure smoo h running of your machine.
• Allow he wa er o cool down before cleaning he drain pump fil er.
CAUTION
Drain, using the drain hose, before opening the pump filter to remove objects.
Be careful when draining if the water is hot.

18
MAINTENANCE
■Cleaning the Dispenser
• The dispenser may need o be cleaned periodically due o laundry addi ive build-up.
• Run warm wa er and use a sof brush or clo h on he drawer, liquid de ergen box and inser s o remove any excess
laundry addi ives.
• Clean he drawer opening using wa er and a small brush.
• Follow he illus ra ions in reverse order o replace he par s o heir proper loca ion.
NOTE: Do not use any cleaning substance on the drawer opening other than water because it will drain into the tub.
If this should happen, set the washer for a rinse and spin cycle to remove any cleaning substance from the
washer before doing a load of laundry.
■The washing drum
• If you live in a hard wa er area, lime scale can con inuously build up in places where i canno be seen
and i is no easily removed from he drum.
Over ime he build-up of scale clogs appliances, and if i is no kep in check, hese will even ually
have o be replaced.
• Al hough he washing drum is made of S ainless s eel, specks of rus can be caused by small me al ar icles
(paper clips, safe y pins, e c.) which have been lef in he drum.
• The washing drum should be cleaned from ime o ime.
• If you use descaling agen s, dyes, or bleaches, make sure hey are sui able for washing machine use.
• Descaler could con ain componen s ha can damage par of your washing machine.
• Remove he spo s wi h a s ainless s eel cleaning agen .
• Never use s eel wool.
1
SOFTENER
MAX
Pull he dispenser
drawer ou un il i s ops.
2
Press down he lock ab
on he bleach inser .
Remove he drawer.
3
Remove he liquid de ergen
box, sof ener and bleach
inser s from heir
compar men s.
SOFTENER
MAX