LG F7091MDL2 User manual

WASHING
MACHINE
F7091MDL2
F8091NDL2
F80E3NDL2
P/NO : MFL67584550
Rev. No.: 00
Please read this manual carefully before operating
your washing machine and retain it for future reference.
F10E3NDL2
F10E3NDL25
MFL67584550

ontents
C
*
* Feature exists in selected models only.
2

3

equally
[5.5kg : F7091MDL2]
[6.0kg : F8091NDL2/F80E3NDL2/F10E3NDL2/F10E3NDL25]
*
-
*
*
Adjustable leg
* Part can be dif
No Spin/400/600/700 [F7091MDL2]
No Spin/400/600/800 [F8091NDL2/F80E3NDL2]
No Spin/400/800/1000 [F10E3NDL2/F10E3NDL25]
*
ferent according to different models.
4

Packing Support
carpeted floor.
subjected
in
caused
5
Unpacking
Cut the straps and open the upper flaps of Packing box & take out the Anti Rat Cover.
While taking out the Machine from packing, please take due care in removing packing
support given at centre of the base packing.
Anti Rat Cover is
placed below the upper
flaps of the Packing
box.
Anti Rat Cover installation
Accessories for fixing Anti Rat Cover.
1. Take out the poly bag (containing Screws/Washers).
2. Tilt the machine sideways.
3. Bend & insert the flaps of Anti Rat Cover into the bottom side of machine.
4. Assemble the Anti Rat Cover on the bottom side of the machine by using
Screws & Washers.
Machine.

adjustable legs
It is advisable to avoid, the usage of trolley & the movement of Washing Machine after installation.
As it may disturb the levelling of washer, which can create excessive noise & vibration.
6

equally
(0.3~10kgf/cm²)
*
*Part can be different according to different models. 7

Two rubber seals are provided
with inlet hose connectors.
These are used to prevent water
leakage.
Make sure the connection to tap
is sufficiently tight.
Check rubber seals in inlet hose
connectors.
Screw the hose connector onto
water supply tap.
Hose
Connector
Rubber
seal
8

in the sink,
9

leg
legs
After the washer is levelled, tighten all lock nuts up towards the base of
the washer.
leg
leg,
legs legs
Adjustable leg Adjustable leg
legs
10