LG WD-1070FD User manual

14
ow to use washer
H
•Push the Power button to start.
•Push the Start/Pause button.
•Initial condition
- Wash : Only main wash
- Rinse : 3 times
- Spin : 800 rpm
- Water temperature : 40˚C
- Program : Coloureds
•Push the Power button to start.
•Select the conditions which you want to
use, by pressing each button.
For selecting the each conditions, please
refer to the page15~page20
•Push the Start/Pause button.
1. For use in the initial
programme (Coloureds) 2. Manual Selecting

15
ow to use washer
H
(1) Button : Option
(2) Button : Spin
(3) Button : Temp.
(4) Child lock
(5) Button : Time Delay
(6) Button : Rapid
(7) Button : Start/Pause
(8) Dial : Program
(9) Button : Power
(1) (2) (3) (4) (5) (6) (7) (8) (9)
1. Bio
2. Rinse+
Option
•By pressing the Option
button, the Option function
can be selected.
- Bio
- Rinse+
- Eco
- Pre Wash
•
If you want to elimenate protein stains(milk, blood,
chocolate...), you may select Bio function by
pressing the option button.
[You can select Bio function when temperature is
higher than 60 C in Whites, Coloureds and
Synthetic.]
•If you wish to rinse more, Rinse+function
will remove any trace of detergents.
•By selecting Rinse+function, the Rinse
Time and the Rinse water are increased.
4. Pre Wash
3. Eco
•By selecting Eco function, the water
temperature is reduced and washing time is
lengthened. So you can economize in your
consumption of energy.
[You can select Eco function when
temperature is higher than 60 C in Whites,
Coloureds and Synthetic.]
•If the laundry is heavily soiled, “Pre Wash”
course is effective.
•Pre Wash is available in Whites,
Coloureds and Synthetic.
If lamp turns on, that function has been
selected.

16
ow to use washer
H
1. Spin selection
Spin
•By pushing the Spin button, the spin rpm
can be chosen.
[WD-1070(5)F(H)(B)] [WD-1170(5)F(H)B]
•Spin speed is available according to the
program as follows.
•WD-8070F(H)(B)
- Whites / Coloureds / Synthetic
800URinse HoldUNo SpinU400U600
- Delicate / Wool / Hand Wash
400U600U800URinse HoldUNo Spin
•WD-1070(5)F(H)(B)
- Whites / Coloureds/Synthetic
800U1000URinse HoldUNo
SpinU400U600
- Delicate
400U600U800URinse HoldUNo Spin
- Wool / Hand Wash
400U600U800U1000URinse HoldUNo
Spin
•WD-1170(5)F(H)B
- Whites / Coloureds/Synthetic
800U1100URinse HoldUNo
SpinU400U600
- Delicate
400U600U800URinse HoldUNo Spin
- Wool / Hand Wash
400U600U800U1100URinse HoldUNo
Spin
•WD-1270(5)F(H)B
- Whites / Coloureds
800U1000U1200URinse HoldU
No SpinU400U600
- Synthetic
800U1000URinse HoldUNo SpinU
400U600
- Delicate
400U600U800URinse HoldUNo Spin
- Wool / Hand Wash
400U600U800U1000URinse HoldUNo
Spin
[WD-8070F(H)(B)]
[WD-1270(5)F(H)B] [WD-1370(5)F(H)B]

17
ow to use washer
H
2. No spin
•WD-1370(5)F(H)B
- Whites / Coloureds
800U1100U1300URinse HoldU
No SpinU400U600
- Synthetic
800U1100URinse HoldUNo SpinU
400U600
- Delicate
400U600U800URinse HoldUNo Spin
- Wool / Hand Wash
400U600U800U1100URinse HoldUNo
Spin
3. Rinse Hold
•If you desire to leave fabrics in the machine
without spinning after rinse to prevent them
from getting wrinkled, you may select rinse
hold by pressing the spin button.
•If you want to drain and spin, when Rinse
Hold function is proceed, Push the
Start/Pause button to cancel the Rinse Hold
function and select spin speed or program.
Push the Start/Pause button again to start
program.
•If you want to drain only, select the no spin
or pump program.
If lamp turns on, that function has been selected.
•If no spin is selected, the washer stops after
draining water.
If lamp turns on, that function has been
selected.
1. Water Temperature
Water Temp.
•By pushing the Temp
button, the water
temperature can be
selected.
- Cold
- 30˚C / 40˚C / 50˚C / 60˚C /
95˚C
•Water temperature can be selected as
below according to the program.
- Whites
95˚C
U 40˚C U 50˚C U 60˚C
- Coloureds & Synthetic
40˚C
U 50˚C U 60˚C U Cold U 30˚C
- Delicate & Wool
30˚C
U 40˚C U Cold
- Hand Wash
Cold
U 30˚C U 40˚C
Selected temperature’s lamp turns on.
For the more detailed information, please refer
to the page13.

18
ow to use washer
H
Child lock
Time Left
Time Left
Change
the desired
program
If you want to lock all the buttons to prevent
operation by a child or infirm persons, this
function can be used.
•Child lock can be set by pressing the Temp.
button and Time Delay button simultaneously.
• When child lock is set, all buttons are inoperable.
•To deactivate Child lock system, push Temp. and
Time Delay button simultaneously again.
•If you want to change the program when Child
lock is active,
1. Press both Temp. and Time Delay together.
2. Press the Start/Pause button.
3. Change the desired program and press the
Start/Pause button.
•The child lock can be set at any time and it is
automatically canceled when operational errors
occur. Also Child lock works when power is off.
1. Child lock
Time Left Time Left
Time Delay
1. Time Delay
Preparing washing before starting “Time
Delay”
- Turn on the water tap.
- Load laundry and close the door.
- Place the detergent and fabric softener in
the drawer.
•How to set “Time Delay”
- Push Power button.
- Turn the Programme dial to select
the program you require.
- Push Time Delay button and set the
desired time.
- Push the Start/Pause button.
(“:”blinks.)
•If Time Delay button is pushed, “3:00”is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
•Each pushing of the button advances on
time delay by one hour.
•To cancel the time delay, push the Power
button.
•Time Delay is ‘expected time’from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
• According to the condition of water supply and
temperature, the delayed time and the actual
washing time may vary.

19
ow to use washer
H
Rapid
1. Rapid
•By pressing the Rapid
button, Rapid function is
selected.
•Rapid function reduces the whole time
including the washing and rinsing time
about by half an hour.
•Rapid is available in Whites, Coloureds
program.
If lamp turns on, that function has been selected.
Start/Pause
•This Start/Pause button is used to start
wash cycle or pause the cycles.
•If temporary stop of wash cycle is needed,
push “Start/Pause”button.
•After the pause button is pressed, the power
is turned off automatically 4 minutes later.
1. Start
2. Pause
Programme
•9 programs
are available
according to
the laundry
type.
1. Program
2. Course
•When Start/Pause button is pushed,
Coloureds program is automatically selected.
- By turning the Program dial, the program is
selected in orders of “Coloureds
U
Synthetic U Delicate U Wool U
Hand Wash U Rinse+Spin U Spin U
Pump U Whites”.
Regarding to the laundry type for each program
Please refer to the page13.
- Whites
- Coloureds
- Synthetic
- Delicate
- Wool
- Hand Wash
- Rinse+Spin
- Spin
- Pump
(Programme)
1. Power
2. Initial Program
Power
•Press the Power button to turn power on
and off
•To cancel the Time Delay function, it
can also be used.
•When the Power button is pushed, the
washer is ready for Coloureds program.
And the other initial conditions as follows.
•So, if you want to advance into the
washing cycle without selecting the
program, just push Start/Pause button
and then the washer will proceed.
Initial program
- Coloureds Program / Main wash /
Normal Rinse/800 rpm / 40˚C

20
ow to use washer
H
•If the washer has a trouble, the trouble
type is displayed.
“”: Sensing water pressure error
“”: Problem of overfilling water
“”: Door is not closed
“”: Over load in moter.
“”: Over load in moter.
“”: Water inlet trouble
“”: Drainage trouble
“”: Imbalance trouble
“”: Water temperature trouble
If this error letters are displayed, please refer
to the troubleshooting page24 and follow the
guide.
Display
•When child lock is selected, the
“”is displayed.
•When time delay is selected, it shows
the remaining times to finish the selected
program.
•When washing cycle is completed,
“”is displayed on the “Multi
display”.
•During washing cycle, the remaining
washing time is displayed.
•Recommended program by
manufacturer.
- Whites : around 2 hours and 38 minutes
- Coloureds : around 1 hour and 55 minutes
- Synthetic : around 1 hour and 28 minutes
- Delicate : around 58 minutes
- Wool : around 58 minutes
- Hand Wash : around 57 minutes
- Rinse+ Spin : around 19 minutes
- Spin : around 11 minutes
- Pump : around 1 minute
•The washing time may vary by the
amount of laundry, water pressure,
water temperature and other washing
conditions.
•If the imbalance is detected or if the
suds removing program works, the
wash time shall be longer.
(Max. increasing time is 45minutes.)
1. Special function display
3. Completion of washing
4. Time left
2. Self diagnose display