Lian-Li PC-V1000L User manual

Installation Guide
Case components
Removable cover & air filter,
Spare 120 mm or 140 mm fans mount x 2
Multi-media
ports
Power switch
Patented tool-less
5.25" device mounting
2.5" HDD mount x 2
or 3.5" HDD mount x 1
120 mm fans x 3
with air filters
Power LED
HDD LED
Rubberized grommets
for liquid cooling tubing
Ventilation holes
on the PCI slots
Removable air filter
Removable HDD tray x 8
(3.5" HDD or 2.5" HDD)
120 mm fan
Spare 120 mm fans x 2
Metal casters
with brake
C50.V1000L.00E-1
Remove side panels Motherboard installation Remove front fan
Follow the arrow to remove
the front fans
ODD installation
1
2
PSU installation
Hardware list
Place the M/B onto the
copper bolt and fasten screws
to secure.
Pull side panels out to remove.
Place the PSU on the
stand, and push against the
rear panel.
Fasten screws to secure.
3.5" HDD installation2.5" HDD installation
Remove the HDD tray
Remove 2 thumb screws. Release the HDD tray. Insert the 3.5" HDD, and fasten
thumb screws to secure.
Fasten the HDD to the cage
bottom with 4 screws.
Release brake
Follow the arrow to release the
brake
Loose the 4 screws to release the 5.25" .bezel Push the ODD into the
5.25" rack, Close the bracket
to secure.
Thumb screws (41)
for 3.5" HDD
Screws (5)
for PSU mounting
USB 3.0 to USB 2.0
converter (1)
Thumb screws (4)
for ODD (Spare part)
Buzzer (1)
Cable tie (3)
for cable
Screws (37)
for 2.5” HDD
USB
3-pin to 4-pin power-cord
converter (2) for fan Clamp (2)
Anti-vibration rubber rings (8)
for 3.5" /2.5" HDD
S (8)
for 2.5" HDD
crews M3
Screws (12)
for MB
5.25" bezel

2.5" HDD installation 3.5" HDD installation
Install screws along with
anti-vibration rubber rings onto
the 2.5" HDD.
Install screws along with
anti-vibration rubber rings
onto the 3.5" HDD.
Slide the HDD into the holes
behind the motherboard tray.
Slide the HDD into the holes
behind the motherboard tray.
C50.V1000L.00E-2
Supports water cooling radiator
Fasten the fan on the fan panel with screws (from option).
Option kits:
120 mm fans or
140 mm fans
RED
GREEN
BLACK
WHITE
VCC
D-
D+
GND
RED
GREEN
BLACK
KEY
WHITE
VCC
D-
D+
GND
1
20
11 10
USB
USB 3.0 to USB 2.0 converter
Cable guideinstallation
POWER SW
BLACK / WHITE -
BLACK +
POWER LED
POWER LED
BLACK +
BLACK / WHITE -
HDD LED
BLACK / WHITE -
BLACK +
SPEAKER
RED+
NC
NC
Blue
I/O port installation
HD AUDIO
BLUE
BLACK PURPLE
YELLOW
GRAY
RED
10
8
6
4
2
9
7
5
3
1
GREEN
KEY
ORANGE
N.C.
GND+H.S. TUBE
11
20
10
1
USB 3.0
Supports motherboard
USB 3.0 20 Pin header
Follow the arrow to remove the
air filter
Remove air filter