Libelium Smart Water Solution Kit User manual

Libelium-Eagle.io
Smart Water Solution Kit
Quick Start Guide

-2-
IoT Solution Kit
INDEX
1. Identify the products........................................................................................................................... 3
2. Open the box........................................................................................................................................ 3
3. Identify Meshlium device and antennas............................................................................................ 3
4. Antennas set up ................................................................................................................................... 4
5. Power set up......................................................................................................................................... 4
6. Internet set up ..................................................................................................................................... 5
7. Checking data received at Meshlium ................................................................................................. 6
8. Now you can receive data ................................................................................................................... 7
9. Get Ready to send Data....................................................................................................................... 7
10. Open the box ..................................................................................................................................... 7
11. Recharge Plug & Sense!..................................................................................................................... 8
12. Antennas set up................................................................................................................................. 8
13. Identify Plug & Sense! family............................................................................................................ 9
14. Check connection diagram............................................................................................................. 11
15. Sensors setup................................................................................................................................... 11
16. Connect sensors............................................................................................................................... 12
17. Connect Solar Panel ........................................................................................................................ 12
18. Turn ON Plug & Sense!..................................................................................................................... 13
19. Checking if data is received ............................................................................................................ 14
20. Next Steps ........................................................................................................................................ 14

-3-
IoT Solution Kit
1. Identify the products
2. Open the box
3. Identify Meshlium device and antennas

-4-
IoT Solution Kit
4. Antennas set up
Antennas *
a) Dipole 5 dBi (Bluetooth, WiFi, XBee-PRO 802.15.4).
b) 4G / GPS (3 antennas for EU, US or BR models; 2 antennas for AU models).
c) Dipole 4.5 dBi (XBee 868LP, XBee-PRO 900HP).
(*) Number and type of antennas depend on the model purchased.
5. Power set up

-5-
IoT Solution Kit
6. Internet set up
Wi Access:
• Connect to Meshlium Wi AP
- Meshlium_XXXX,
- no password needed
• Access Meshlium IP 10.10.10.1/MeshliumManager using a Web Browser (IE, Chrome, Firefox)
- User: admin
- Password: libelium
Ethernet Access:
• Access Meshlium assigned IP/MeshliumManager using a Web Browser (IE, Chrome, Firefox)
- User: admin
- Password: libelium
• Meshlium will use DHCP to get the IP address from your router, check in your router the IP address given.

-6-
IoT Solution Kit
7. Checking data received at Meshlium

-7-
IoT Solution Kit
8. Now you can receive data
9. Get Ready to send Data
10. Open the box

-8-
IoT Solution Kit
11. Recharge Plug & Sense!
12. Antennas set up

-9-
IoT Solution Kit
13. Identify Plug & Sense! family
Smart Environment Ambient Control
Smart Environment PRO
Smart Agriculture Smart Cities PRO

-10-
IoT Solution Kit
Smart Water
Smart Security
Smart Parking Radiation Control
4-20 mA Current Loop
Smart Water Ions

-11-
IoT Solution Kit
14. Check connection diagram
15. Sensors setup

-12-
IoT Solution Kit
16. Connect sensors
17. Connect Solar Panel

-13-
IoT Solution Kit
18. Turn ON Plug & Sense!

-14-
IoT Solution Kit
19. Checking if data is received
• Access to Meshlium as explained before in page 5-6.
• To check that your Plug & Sense! is sending data, see the ID_Wasp. The ID_Wasp of each Plug & Sense! can be found in the
details sticker.
20. Next Steps
• Your Key Account Manager will put you in contact with the person in charge of the software services provider.