Liberty Furniture 272-BR-13FS User manual

Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have
come loose inside the carton during shipment. Identify and count all parts and compare with the parts list below :
ASSEMBLY TIPS :
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast and easy assembly.
!WARNING !
1. Don't attempt to repair or modify parts that the broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
LIBERTY FURNITURE
ASSEMBLY INSTRUCTION
DESCRIPTION : QUEEN STORAGE BED
PAGE 1/2
ITEM NO : 272 - BR13 / 14FS & 90RSP
2
Led Touch Sensor :
i) Switch on
ii) Lighter
iii) More lighter
iv) Switch off
Adjust the support leg
into position, if necessary
STEP 1
TO RE - ASSEMBLE HANDLE
FROM INSIDE DRAWER TO
OUTSIDE DRAWER
2
PART LIST
DESCRIPTION
ITEM QTY
1
2
3
HEADBOARD PANEL
W/LIGHTS
KING STORAGE
FOOTBOARD
1PC
1PC
7
DESCRIPTION
ITEM QTY
A
B
C
D
JCBB SCREW
M8 x 25mm
SPRING WASHER
5/16 x 15mm
ALLEN KEY M5
FLAT WASHER
5/16 x 22mm
8pcs
8pcs
8pcs
1pc
ASSEMBLY HARDWARE PACK FOR SIDE RAIL
4
5
STORAGE BED
RAILS
WOODEN
SLATS
CENTER
RAIL
12PCS
2PCS
2PCS
*
Assembly Tool
Not Included
E
CB SCREW
M4 x 32mm
6WOODEN
SUPPORTS 4PCS
24PCS
All Hardware, pack in Footboard
*
HANDLE
HANDLE
SCREW
STEP 2
TO REMOVE THE DRAWER TO INSTALL THE DRAWER
LEFT SIDE - PUSH TAB UP
RIGHT SIDE -
PUSH TAB DOWN LEFT SIDE - PUSH TAB UP
RIGHT SIDE -
PUSH TAB DOWN

STEP 3
E
A
B
C
3
1
STEP 4
2
3
E
A
BC
1
2
3
3
6
5
4
Step 6
D
4
Step 7
Push the side rail (3) to meet
with wooden slat (4) and fix
the CB Screw (D) by using
the Screw Driver.
3
WALL
3
2
1
3
Step 8
Adjust the leveller,
if necessary.
Step 5
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts which may have
come loose inside the carton during shipment. Identify and count all parts and compare with the parts list below :
ASSEMBLY TIPS :
1. Remove hardware from box and sort by size.
2. Please check to see that all hardware and parts are present prior start of assembly.
3. Please follow attached instructions in the same sequence as numbered to assure fast and easy assembly.
!WARNING !
1. Don't attempt to repair or modify parts that the broken or defective. Please contact the store immediately.
2. This product is for home use only and not intended for commercial establishments.
LIBERTY FURNITURE
ASSEMBLY INSTRUCTION
PAGE 2/2
DESCRIPTION : QUEEN STORAGE BEDITEM NO : 272 - BR13 / 14FS & 90SP