LIELONGREN LLR010C User manual

Time Setting
1. In time mode, press and hold the TIME-SET button for 2 seconds to enter into
time-setting mode, the hour digits flash.
Press ▲ or ▼ to set the current hour (hold to advance rapidly).
2. Press TIME-SET button again, the minute digits flash.
Press ▲ or ▼ to set minute.
3. Press TIME-SET button again, the 12/24Hr digits flash.
Press ▲ or ▼ to set 12/24Hr time format.
4. Press TIME-SET button again, the year digits flash.
Press ▲ or ▼ to set year.
5. Press TIME-SET button again, the month digits flash.
Press ▲ or ▼ to set month.
6. Press TIME-SET button again, the day digits flash.
Press ▲ or ▼ to set day.
7. Press TIME-SET button again, save and exit time-setting mode.
Time Setting
1. In time mode, press and hold the TIME-SET button for 2 seconds to enter
time-setting mode, the hour digits flash.
Press ▲ or ▼ to set the current hour (hold to advance rapidly).
2. Press TIME-SET button again, the minute digits flash.
Press ▲ or ▼ to set minute.
3. Press TIME-SET button again, the 12/24Hr digits flash.
Press ▲ or ▼ to set 12/24Hr time format.
4. Press TIME-SET button again, the year digits flash.
Press ▲ or ▼ to set year.
5. Press TIME-SET button again, the month digits flash.
Press ▲ or ▼ to set month.
6. Press TIME-SET button again, the day digits flash.
Press ▲ or ▼ to set day.
7. Press TIME-SET button again, save and exit time-setting mode.
ON/OFF
ON/OFF
PM
ON/OFF
ON/OFF
PM
ON/OFF
ON/OFF
PM
ON/OFF
ON/OFF
PM
ON/OFF
ON/OFF
PM
ON/OFF
ON/OFF
PM
UP SNOOZE
DC OUT 5V
DOWN
DC IN 5V
Dimmer
Buzzer Volume
Alarm M o d e
Dimmer
Buzzer Volume
Vibration Intensity
USB Charger Port
Alarm M o d e
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Buzzer
Alarm Setting
1. In time mode, press and hold AL-1 button for 2 seconds to enter into
alarm-setting mode, the hour digits flash.
Press ▲ or ▼ to set hour (hold to advance rapidly).
2. Press AL-1 button again, the minute digits flash.
Press ▲ or ▼ to set minute.
3. Press AL-1 button again, the alarm-day digits flash.
Press ▲ or ▼ to set alarm day:
4. Press AL-1 button again, save and exit alarm-setting mode.
※ TIPS: Setting AL-2 is the same as AL-1.
Switching Alarm ON/OFF
In time mode, press AL-1 button to switch on/off the alarm, the AL-1
indicator will be on/off correspondingly.
※ TIPS: Switching ON/OFF AL-2 is the same as AL-1.
ON/OFF
ON/OFF
PM
ON/OFF
ON/OFF
PM
Digits
1-1
1-5
6-7
1-7
Meaning
Single day only
Weekdays only
Weekends only
Daily
ON/OFF
ON/OFF
PM
ON/OFF
ON/OFF
PM
(Only blinks when battery
power less than 10%)

Adjusting Snooze Duration
1. In time mode, press and hold SNOOZE button for 2 seconds to enter into
snooze-duration-setting mode and the digits flash.
Press ▲ or ▼ to set the current duration (hold to advance rapidly).
※ Snooze duration: Default 9 minutes (1-15 minutes adjustable)
2. Press SNOOZE button again, save and exit snooze-duration-setting mode.
Activating Snooze When Alarm Goes Off
When Alarm 1 (Alarm 2) is sounding, press SNOOZE button, the alarm will
suspend and go off again aer the set snooze duraon.
How to Adjust Brightness?
LIELONGREN
Customer Service Team
Email: [email protected]
Stopping Alarm When It Goes Off
When Alarm 1 (Alarm 2) is sounding, the related AL-1 (AL-2) indicator flash.
Press any buttons (except SNOOZE button) to stop and reset
the alarm to go off the next day.
Using Alarm-Test Mode
Long press ▲ button for 3 seconds to enter Alarm-Test-Mode, then you can
set the right side switcher to select your favorite buzzer volume and vibration
intensity. After that, short press ▲ button to exit the test mode.
Alarm Mode Setting
Adjust the right side switcher to select your desired alarm mode:
3-Level Adjustable Buzzer Volume & Vibration Intensity
Adjust the right side switcher to select your desired buzzer volume & vibration intensity:
Adjusting Brightness
Adjust to your favorite brightness level by turning the knob on the right side.
Buzzer
Both
Vibration
Wake by Buzzer
Wake by Buzzer & Vibrator
Wake by Vibrator
Level
HI
MED
LO
Buzzer Volume
85dB
75dB
65dB
Vibration Intensity
Strongly Shake
Ordinarily Shake
Gently Shake
ON/OFF
ON/OFF
PM
PM
PM