Life Smart LS-1P-3CH13 User manual

FMM1314
INFRARED SAUNA SYSTEM
MODELS: LS-1P-3CH13&LS-2P-
5CH13
Welcome

Thank you for purchasing our sauna products,we congratulate you
onyour new path to better health. We, at Life smart are striving to
becomethe best infrared sauna supplier in the country; our list of
consumers increase daily and we believe your success is our success.
We attribute this growth and success entirely to ourcustomer
satisfaction, the recognized health benefits, and the quality of our
workmanship. At our factory, we use only the finest materials
coupled with state-of-art construction and the highest safety standard
in the industry.
Introduction

We congratulate you on your new path to better health! Thousandsof
users enjoy the benefits of an infrared sauna every day. Now you can
enjoy the great benefits of far-infrared heat within the privacy ofyour
own home.
Please read this manual carefully and thoroughly before using an
Infrared Sauna for the first time. We recommend for you to keep this
manual for future reference.
Benefits:
●Superior Detoxification: Removes Heavy Metals & Fat-stored
Toxins
●Increased Cardiovascular Conditioning
●Stimulated Immune System
●Improved Circulation
●Pain Relief
●Weight Loss and Cellulite Reduction
●Beautiful Skin
●Stress Reduction
Features:
●High quality wood craftsmanship
●High quality electronic control system & digital control panel
●Pre-assembled boardand build-in electrical elements makes the
installation easy
●Accurate temperature sensor
●Energy efficient
●Comfortable backrest
●Considerate detailed designs
Model List

LS-1P-3CH13 LS-2P-5CH13
Packing List for LS-1P-3CH13&LS-2P-5CH13
For any missing parts please contactyour local distributor.

1. Front Panel 2. Back Panel 3. Side Panel (L) 4.Side Panel (R) 5.Bottom
Panel 6. Top Panel 7.Roof Cover 8.Bench Panel 9.Bench Support
10.Backrest 11.AUX Connector12.LED White Light 13.Screws list
1. Front Panel 2. Back Panel 3. SidePanel (L) 4. Side Panel (R)
5. BottomPanel 6. TopPanel 7. Roof cover 8.Bench Panel
9.Bench Support10.Backrest 11. AUX Connector 12.LED white light
13.Screws list
1）Screws for bench Support *2 pieces……
2）Screws for bench Backrest *4 pieces…...
3）Screws for Roof cover *8 pieces……
4)For installing IPOD case (1 piece) ……

Installation Requirements
1. Do not plug any other appliances into the outlet with your infrared
sauna.
2. Only 110/120V outlet is required for those three models.
3. Install the sauna ona completely level floor.
4. Do not spraythe exterior with water. If the floor is damp, install a
floor separator to keep the sauna high & dry.
5. Do not store flammable objects or chemical substances near the sauna.
6. The sauna must be placed indoors and in a dry area. Moisture will
cause damage to the interior and exterior ofthe sauna.
Assembly Instructions for LS-1P-3CH13&LS-2P-
5CH13

Assembly of the sauna requires at least 2 adults to complete. Please read
the instructions thoroughly before and during assembly to ensure proper
installation of the sauna.
<1> LOCATIONOF SAUNA
When you find a good location for your sauna, please notice the
following.
1. The main powercord on the sauna must be easily accessible.
2. The location must be dry and leveled.
<2> PLACING BOTTOMPANEL
Front
Place the bottompanel on the floor. Make sure that the FRONT
direction of your sauna room.
<3> CONNECTING THE BACK PANEL TO BOTTOMPANEL
Attach the back panel to the bottompanel by lining up the backpanel
on the groove of the bottom panel. (Please hold the back panel until
one of the side-panel had been installed.)
<4> INSTALLING THE SIDE PANELS
Install the side panels (Left & Right) to the bottomand back panels
bylining up buckles and fastening them securely in place.
1. Please besure which side panel is Left Side and Right Side.

2. Make sure that all buckles are properly secured in place on all
panels.
<5> INSTALLING BENCH AND THE SUPPORTOR
Install the supportby connecting it with the bottompanel by the
provided screws.
Put the bench onto the supports and push it all the way in until it can
touch the back panel and is securely in place. Make sure of the bench
position, so that the smooth and finished side of the bench are facing up
and forward.
<6>PLACING BACKREST
For better protection of your back during sauna session, please screw
in the backrest on the back panel.
4
pieces
2
pieces

<7>PLACING FRONTPANEL
1. Align the front board with side boards’ corresponding buckles, and
then latch it with left and right boardrespectively.
2. Please take care of the glass doorto avoid damage.
<8> PLACING TOPPANEL
Lower the top panel ontothe assembled panels.
1. Gently place the top panel onto the rest of the
assembled panels. When four corners are in place,
gently push down the top panel from the outside
corners until it is snugly fit over the rest of panels.
2. Make sure the cables in the front left corner do not
get pinched between the panels.
3. Leading the wires of heaters onto the board
through the corresponding hole.
<9> THE MAIN POWER CONNECTION ON
THE TOPPANEL
LS-1P-3CH13

LS-2P-5CH13
1. Connect all the wires for heaters.
2. Connect the control panel wires.
3. Check to be sure that all connections to the controlbox are secure.
4. Please connect the wire of the AUX connector from the panel to
the black boxon the roof panel as per the below pictures
<10 >PLACETHE ROOFCOVER ONTOTHE ROOF PANEL
Place the roofcover ontothe roof panel, connect it to the roof panel
with the provided 8 pieces screws.
<11> ENJOY YOUR SAUNA!
Plug in the main power cord into the wall outlet and power up your
sauna. Turn on the radio, grab some towels, a glass of water and step
you're your sauna and enjoy the benefits of the sauna!!
Digital Control Panel Operating Instructions

1. Poweron
Plug the main power cordinto the wall outlet.
Press the “On/Off” button one time, the controlpanel is now
operable, butthe heaters are not on. You can nowuse the radio and
lights.
2. Warming
Press “On/Off” button again, then the “Warming” light is on,
which indicates the heaters are working. To turn offthe sauna, press
the ON/OFF button. The lights are ona delay.
3. Lighting
The reading light can be turned on or off by pressing button at
any time.
4. Pre-setting
“AUTO” button is for pre-setting the time you want your sauna to turn
on. Press “AUTO” button once. Pre-set the time you want your sauna
to turn on with the UP/DOWN ARROWS. TEMP UP/DOWN
ARROWS are for hour setting and TIME UP/DOWN ARROWSare
for minute setting. The setting range is 00:00-23:59.
5. SaunaTime Adjustment
Session time can be set between 0 and 90 minutes.
a) Press TIME UP/DOWNARROWS to adjust time, time value will
increase or decrease by 1 minute at a time.
b) By holding down the UP/DOWN ARROWSyoucan speed up the
rate of change.
c) Time light will belit to indicate changes being made to time setting.