Life Span ST-10 User manual

ST-10 Stair Climber 3
Level Stepmill Machine
USER MANUAL
NOTE:
Product may vary slightly from the item pictured due to model upgrades. This manual may be subject to updates or changes.
Up to date manuals are available through our website at www.lifespanfitness.com.au
Read all instructions carefully before using this product.
Retain this owner’s manual for future reference.
IMPORTANT
All nuts and bolts are to be checked and tightened on a regular basis. This includes pedals and
other moving parts. Failure to do so may cause damage to your threads and void your warranty.

2
TABLE OF
CONTENTS
I. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03
II. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05
III. Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 07
IV. Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 09
V. Stair climber operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 12
VI. Exercise Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
VII. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
VIII. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
IX. Hand Pulse Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
| TABLE OF CONTENTS

3
I. IMPORTANT SAFETY
INSTRUCTIONS
WARNING: Read all instructions before using this machine.
It is important your machine receives regular maintenance to prolong its useful life. Failing to
regularly maintain your machine may void your warranty.
DANGER: To reduce the risk of electric shock disconnect your treadmill from the electrical
outlet prior to cleaning and/or service work.
Do not use an extension cord: do not attempt to disable the grounded plug by using improper
adapters or in any way modify the cord set.
1. The machine is suitable for commercial and domestic use.
2. The stair climber is suitable for indoor (climate control) use only. It is not for suitable:
- for outdoor or high humidity; recommended operating temperature: 5-40°C
- does not allow water or other liquids to be splashed on the machine
- does not allow the placement or insertion of any foreign objects on the stair climber
3. Stair climber should be installed on solid, levelled surface with a safety space of 100-200cm.
4. The stair climber should be used within the allowable range of voltage AC 110V - AC 240V.
5. Never operate the equipment if it has a damaged power cord or plug. When damaged, these must be
replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a
hazard.
6. Keep the cord away from heated surfaces.
7. Do not operate where aerosol spray products are being used or where oxygen is being administered.
Sparks from the motor may ignite a highly gaseous environment.
8. Never drop or insert any object into any openings.
9. All fixings should be checked before the equipment is used. Ensure to tighten any loose fixings.
10. All manuals relating to the use of the equipment should be retained for future reference.
11. Incorrect or overload training may cause the damage of the motor and controller, accelerate the
aging transmission system, even bodily injuries. Ensure to allow cool down periods.
12. If the equipment has abnormal sound or other abnormal conditions, please stop running
immediately and contact our after-sales department in time, or seek professional help.
13. Emergency stop: In the lower right corner of the stair climber installed with a photoelectric switch
(Sensor), if an object is detected the staircase will immediately stop.
IMPORTANT SAFETY INSTRUCTIONS |
Read all precautions and instructions in this manual before using this equipment.
EQUIPMENT SAFETY:

4| IMPORTANT SAFETY INSTRUCTIONS
NOTE: The photoelectric switch is a sensitive component. If there is dust or there is a deviation
in the installation position, the "emergency stop" will be displayed on the display and the stair
machine cannot be used. Therefore, the surface of the photoelectric switch must be clean and
the installation position must be correct.
14. Check the stop button to ensure the brakes wont before use but pressing the start and stop button
and checking the emergency stop at the bottom.
1. Keep your hands away from all moving parts.
2. Only one person at a time to use this equipment.
3. Ensure to hold onto the handrails for safety and start slow if it is your first time using this
equipment.
4. This appliance is not intended for use by persons (including children) with reduced physical, sensory,
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
5. WARNING: heat rate monitoring systems may be inaccurate. If you feel faint stop exercising
immediately.
6. Children should not be allowed on or around the equipment, even when not in use.
7. Children should be supervised to ensure that they do not play with this machine.
8. Loose-fitting clothing or jewellery that could become an entanglement hazard should not be worn.
9. Training shoes should be worn when using the equipment.
USER SAFETY:
TECHNICAL STANDARDS:
Input power supply voltage AC 110V – AC 240V
Time display range 0:00 - 99:59
Height display range 0.00——999.9m
Heat display range 0-999 (Kcal)
Level display range 0 - 15
Step number display range 0 - 9999
Power cord specification 10A AC250V
Running speed 24 steps / minute - 164 steps / minute

5
II. MAINTENANCE
1. Cleaning
• It is recommended that you clean the equipment before and after each training session. To remove
dust from the equipment, use a soft cloth to wet the following cleaning agents and then wipe all
exposed surfaces.
NOTE: Before using any cleaning agent to clean the fitness equipment, read and follow the
manufacturer’s instructions. Do not use a strong concentration of concentrate, or any acidic cleaner;
this type of cleaner will corrode the protective layer of the equipment. Use warm and slightly soapy
water. Do not spill or spray water or liquid onto any part of the equipment. Wait until the equipment
is completely dry before using the equipment.
• Vacuum around the equipment to prevent dust accumulation from affecting the operation of the
equipment. Use a soft nylon brush to clean the device recesses and foot pedals.
• Clean the area where the emergency stop sensors are to prevent the dust from triggering the
sensors.
2. Daily Inspection
Check the equipment at least once a day for the following problems:
• Belt slip
• Loose fasteners
• Abnormal noise
• Any other signs that the equipment may need to be repaired.
3. Weekly Maintenance
Perform the following maintenance tasks weekly:
• Use water or approved cleaning agents to clean the tracks and wheels.
• Use a vacuum cleaner or wet mop to clean the floor around the equipment.
• Test the console’s features, including heart rate monitoring.
• Check that the equipment is stationary on the floor. All feet of the equipment should be in firm
contact with the floor and the equipment should not be shaken or shaken when in use. If not, please
re-level.
• Tighten any loose bolts or fixings.
Relocation of Equipment
If you plan to move your equipment to a new location, look for adult help and use the right lifting
techniques. You may require 2 or more people to help.
MAINTENANCE |

6| MAINTENANCE
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock.
This product is equipped with a cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
GROUNDING METHODS
DANGER: Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to
whether the product is properly grounded.
Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
This product is for use on a nominal 220-volt circuit and has a grounding plug that looks like the plug
illustrated in sketch A in following figure. Make sure that the product is connected to an outlet having
the same configuration as the plug.
No adapter should be used with this product.
GROUNDING METHODS
Grounded
Outlet
Grounded
Outlet Box
Grounding Pin

7PARTS LIST |
III. PARTS LIST
No.1 Stairmaster
main frame x 1pc
No.2 Left armrest x 1pc No.3 Right armrest x 1pc
No.4 Water Bottle
Holder x 1pc
No.6 Display support
assembly x 1pc
No.11 Upper Shroud x 1pc
No.12 Rear guard x 1pc No.13 Footplate x 2pcs No.33 Display
Assembly x 1pc

8| PARTS LIST
A: M8X55 Cheese head
screws x 2pcs.
B: M10X20 Flat round
head screws x 4pcs
C: M10X150 Cheese head
screws x 2pcs.
D: ɸ10 Flatwasher
x 6pcs.
E: M10 Jam nut x 2pcs F: M4X8 Crossed cheese
head screws x 15pcs
G: M5X10 Crossed cheese
head screws x 2pcs
L: M8X16 Flat round head
screws x 4pcs.
M: ɸ8 Gasket
x 6pcs
P: M10X60 Flat round
head screws x 4pcs

9ASSEMBLY INSTRUCTIONS |
IV. ASSEMBLY INSTRUCTIONS
STEP 1
Please follow the below instructions to ensure the machine is assembled correctly.
•Some parts are pre-fitted to the machine.
•Due to the bulkiness of the item ensure to allow space around the machine and set it up in the
designated area. You may need 2 people to move the machine.
•Remove all parts from the packaging and check that the quantity is correct. Do not discard the
packing material until assembly is completed in case a part is missed.
•All parts are to be tightened during assembly unless otherwise stated. Ensure all bolts are tighten
properly after set-up is complete.
•Ensure all parts are assembled correctly as per the instruction.
6
F
1
11
1
A
12
F
M
F
Communication line
connection

10 | ASSEMBLY INSTRUCTIONS
Part No. Name Quantity
1Stairmaster main frame 1
6Display support assembly 1
11 Upper Shroud 1
12 Rear guard 1
Part No. Name Quantity
AM8x55 Cheese head screws 2
Mɸ8 Gasket 2
FM4x8 Crossed cheese
head screws 15
1. Connect the Communication line in Fig.1 from the back of stair climber on the frame post.
2. Place part 6 through part 11 and secure to Main frame using 2x M8X55 Cheese head screws (A) and
2x ɸ8 Gasket (M).
3. Secure part 11 using 9x M4X8 Crossed cheese head screws (F).
4. Secure part 12 using 6x M4X8 Crossed cheese head screws (F).
STEP 2
Part No. Name Quantity
33 Display 1
LM8X16 Flat round
head screws 4
Part No. Name Quantity
Mɸ8 Gasket 4
1. Connect the 1x connection cable in the support post.
2. For the 2x pulse sensor cable place them into the support tube and out to the side of the support tube
where the hole is present. (To use later to connect to handlebar sensors)
3. Connect the communication line.
4. Attach the display to the support post using 4x ɸ8 Gasket (M) and 4x M8X16 Flat round head
screws (L).
33
LM
Communication line x 1
Heart rate line x 2

11ASSEMBLY INSTRUCTIONS |
STEP 3
Part No. Name Quantity
2Left armrest 1
3Right armrest 1
4Water Bottle Holder 1
13 Foot plate 2
BM10x20 Flat round
head screws 4
CM10x150 Cheese head
screws 2
Part No. Name Quantity
Dɸ10 Flat washer 6
EM10 Jam nut 2
GM5x10 Crossed cheese
head screws 2
PM10x60 Flat round head
screws 4
1. Secure the bottle holder (4) to the support frame using 2x M5X10 Crossed cheese head screws (G).
2. Attach the foot plate (13) to the main frame using 4x M10X60 Flat round head screws (P).
3. Attach the pulse sensor cables on the L/R armrest (2 & 3) to the cable on the sides of the support
post (Fig.2). Once clicked into place push the excess cables back into the support tube. Ensure not to
accidentally clamp onto the cables in the next step.
4. Secure the L/R Armrest (2 & 3) to the support post using 2x M10X150 Cheese head screws (C), 2x ɸ10
Flat washer (D) and 2x M10 Jam nut (E).
5. Secure the L/R Armrest (2 & 3) to the main frame on the other end using 4x M10X20 Flat round head
screws (B) and 4x ɸ10 Flat washer (D).
6. Plug the power cord at the back of machine at turn it on as switch.
FIG 1
ED
4
2
G3 C
DB
P 13
FIG 2
ED33
Heart
Rate Cable
Connection
DC
2M
A
3
Communication
line connection

12 | STAIR CLIMBER OPERATING INSTRUCTIONS
V. STAIR CLIMBER OPERATING
INSTRUCTIONS
1. "TIME/HIGH" window: Displays the movement time and incline height. The time measurement
range is from 0:00-99:59. When it is timed to 99:59, it will be cleared and restart. The climb height
measurement range is from 0.0 to 999.9, once it reaches 999.9, it will be cleared and restart.
2. "CAL" window: Displays the calorie value of the user, counting from 0.00-999.9. It will be cleared and
restarted when the count reaches 999.9.
3. "STEP" window: Displays the number of steps of the user, counting from 0-999. It will be clear when
the count reaches 999.
4. Central dot matrix display area window: This area is WELCOME display area, level, and program
progress chart, etc.
5. The green display tube above: is a circular runway with a circle of 400 meters.
6. Left LED display area window: This area displays the current motion mode indicator.
7. Keypad: Level direct selection button, you can directly input the required level, click to confirm.
WINDOW DISPLAY:
The stair machine panel adopts the capacitive touch principle, and the user can use only one touch at a
time, and the touch effect is comparable to the mobile phone screen. The surface of the panel is made
of acrylic, which is wear-resistant and durable, and has a beautiful color and beautiful appearance. It
fully guarantees that there will be no problems such as wear and tear on the paint after a long time of
use.

13STAIR CLIMBER OPERATING INSTRUCTIONS |
KEYBOARD FUNCTION:
1. "PRO" is the program key: In standby mode, press this button to cycle through "BMI", "TIME COUNT",
"DISTANCE COUNT", "CALORIES COUNT" and "PULSE".
2. "REST": Is the return button: Press this button to return to the standby interface.
3. "START/STOP": Once the power is switched on, press this button to start and stop workout.
4. "+" and "-" are the level increase and decrease keys: When in the standby state it is used to adjust
and set value. It is used to adjust the level after starting, and the adjustment range is 1 increment at
a time.
5. "1, 2, ... 9, 0, Delete, ok": Keypad is a level shortcut.
P1 3 3 5 5 4 4 6 6 8 8 7 7 8 8 7 7 5 5 4 4
P2 3 3 4 4 5 5 8 8 9 10 7 7 6 6 5 5 4 4 3 3
P3 3 3 5 5 5 7 7 7 7 9 9 6 6 7 7 5 4 4 3 3
P4 3 3 5 5 7 7 10 10 7 7 10 10 5 5 3 3 4 4 4 3
P5 4 4 6 6 8 8 10 10 8 8 6 6 4 4 3 3 4 4 3 3
P6 2 2 4 4 6 6 8 8 10 10 8 8 6 6 4 4 3 3 2 2
P7 1 1 1 1 5 5 5 5 8 8 8 8 6 6 5 5 5 5 4 4
P8 2 2 4 4 6 6 4 4 6 6 4 4 6 6 4 4 5 5 3 3
MACHINE CHECKS:
A. Check that the handlebars are steady, and the machine is stable.
B. Turn on the power and run the machine for a few minutes. Start using the equipment and test that all
buttons correspond to the function it indicates and in working order.
C. Turn on the Power Key and start the machine at level 1. Check that the cyclic steps are functioning
normally.
MANUAL MODE:
In the standby state, press the START/STOP button. The speed will start at level 1 and time will count
from 0.
Use the "+" or "-" button to change the speed level.
Click on the Numerical buttons for quick speed adjustments and OK to confirm.
The "Delete" button will undo your setting.
PHOTOELECTRIC SWITCH (SENSOR):
The photoelectric switch is placed in the lower right corner of the step. When the object is blocked, the
stair machine will stop immediately, this is used as a safety precaution.
Prior to using the machine, ensure that the photoelectric switch is functioning. In non-emergency
situations, the photoelectric opening should not be used as an OFF switch.

14 | EXERCISE GUIDE
VI. EXERCISE GUIDE
PLEASE NOTE:
Before beginning any exercise program, consult your physician. This is important especially if you are
over the age of 45 or individuals with pre-existing health problems.
The pulse sensors are not medical devices. Various factors, including the user’s movement, may
affect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in
determining heart rate trends in general.
Exercising is great way to control your weight, improving your fitness and reduce the effect of aging and
stress. The key to success is to make exercise a regular and enjoyable part of your everyday life.
The condition of your heart and lungs and how efficient they are in delivering oxygen via your blood to
your muscles is an important factor to your fitness. Your muscles use this oxygen to provide enough
energy for daily activity. This is called aerobic activity. When you are fit, your heart will not have to work
so hard. It will pump a lot fewer times per minute, reducing the wear and tear of your heart.
So as you can see, the fitter you are, the healthier and greater you will feel.
WARM UP
Start each workout with 5 to 10 minutes of stretching and some light exercises. A proper warm-up
increases your body temperature, heart rate and circulation in preparation for exercise. Ease into your
exercise.
After warming up, increase the intensity to your desired exercise program. Be sure to maintain your
intensity for maximum performance. Breathe regularly and deeply as you exercise.
COOL DOWN
Finish each workout with a light jog or walk for at least 1 minute. Then complete 5 to 10 minutes of
stretching to cool down. This will increase the flexibility of your muscles and will help prevent post-
exercise problems.

15
TROUBLESHOOTING |
WORKOUT GUIDELINES
This is how your pulse should behave during general fitness exercise. Remember to warm up and
cool down for a few minutes.
TARGET ZONE
MAXIMUM
85%
70%
COOL DOWN
AGE
HEART RATE
200
180
160
140
120
100
80
20 25 30 35 40 45 50 55 60 65 70 75
There are two types of fault problems:
1. An emergency stop appears on the screen:
Emergency stop problem: Check whether the photoelectric switch under the steps is blocked (clean it
with a towel), and then check whether the reflective paper is aligned with the sensor probe light (If you
do not understand, ask for manufacturer for a video).
2. The screen display is normal, and the stair climber does not run after "Start".
Step 1: open the protective cover on both sides of the stair climber and loosen the four screws fixing
the operating system a little. If the loose screws have no effect, then try the next step (If you do not
understand, ask for manufacturer for a video).
Step 2: Turn the wheel of the brake system by hand. If it you cannot turn (or too hard to turn), then the
brake system is faulty, and the brake needs to be replaced. If it is easy to turn, then go to the next step.
Step 3: Check whether the signal light of the controller is normal (blinking). If it is not normal, replace
the controller.
If the above steps are not resolved, please contact the manufacturer!
VII. TROUBLESHOOTING

16 | WARRANTY
VIII. WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come
with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation for any other reasonably foreseeable loss
or damage.
You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure. Full details of your consumer rights may be found at
www.consumerlaw.gov.au.
Please visit our website to view our full warranty terms and conditions:
http://www.lifespanfitness.com.au/warranty-repairs
WARRANTY AND SUPPORT
Any claim against this warranty must be made through your original place of purchase.
Proof of purchase is required before a warranty claim may be processed.
If you have purchased this product from the Official Lifespan Fitness website, please visit
https://lifespanfitness.com.au/warranty-form
For support outside of warranty, if you wish to purchase replacement parts or request a repair or
service, please visit https://lifespanfitness.com.au/warranty-form and fill in our Repair/Service
Request Form or Parts Purchase Form.
Scan this QR code with your device to go to lifespanfitness.com.au/warranty-form

17
HAND PULSE TECHNOLOGY |
IX. HAND PULSE TECHNOLOGY
This product comes equipped with hand pulse sensors which are used to pick up tiny EKG/ECG signals
that run through the body when your heart beats. These electrical EKG/ECG signals are very small and
must be amplified 1000 times to make the signal viable for the computer to display your pulse.
To ensure proper operation:
•The user must maintain good, consistent contact on all four sensors.
•The users skin cannot be too dry or too wet.
Other factors that could affect the reading:
•Change of grip on the sensors (during slow pace walking and up to running).
•Tightening of hand muscles will produce small electrical signal.
•Static electricity charges from the air or from walking on the treadmill.
EKG/ECG Sensors may filter through actual EKG/ECG signals and "Noise" factors that may affect the
reading. This will cause the pulse reading to be delayed and will take longer to update the display as the
heart rate changes. Too much noise will create an incorrect reading. Medical conditions or having no
electrical signal in the hands are other factors that may also affect pulse readings.
These are limitations of hand pulse technology and even the most expensive systems (which can
cost upwards of $3,000) used in hospitals have the same problems. The difference is that a patient
in a hospital is not running on a treadmill. Hand pulse technologies work well on stationary exercise
machines like bikes and even elliptical cross trainers but are not perfect on a treadmill. We offer
treadmills with a wireless heart rate receiver which may be the more accurate option.
To test if your hand pulse sensors are working up to specification, hold them while standing on the
sidestep rails, not walking, and see if the reading is more in line with what you would expect. This will
eliminate the movement and static electricity factors. If your hands are dry, then wet them slightly
(saliva works as a great conductor if this doesn’t bother you).

WWW.LIFESPANFITNESS.COM.AU