LIFEPLUS DBJ-32A Operating manual
ICE MAKER
PRODUCT USE GUIDE
Choose LifePlus, Choose A Plus Life.
DBJ-32A
We provide great warranty service. If you encounter any difficulties, please
contact the above email for help. We will reply you within 24 hours.
ICE MAKER
PRODUCT USE GUIDE
Choose LifePlus, Choose A Plus Life.
DBJ-32A
Thank you for choosing our ice maker. This user manual will provide you with
valuable information necessary for the proper care and maintenance of your new
product.
Please take a few moments to thoroughly read the instructions and familiarize
yourself with all the operational aspects of your new product.
COMMERCIAL ICE MAKER
USER'S MANUAL
DBJ-32A
Please read this instruction
carefully before use.
Damage caused by
improper operation is not
covered by the warranty.
Please Note
After opening the box, please do not use it
immediately. Let the ice machine stand upright
for 24 hours first.
This is because the ice machine has experienced a long time of shipping. This
will cause uneven distribution of refrigerant in the compressor. If you use it
immediately after receiving it, it may cause damage to the compressor, and
we will not bear this compensation.
Please pay special attention to the red text
GENERAL INFORMATION PAGE 4
SECTION 1
TABLE OF CONTENTS
RECEIVING AND INSPECTION PAGE 4
PRECAUTIONS FOR SAFE OPERATION PAGES 6-7
SECTION 2
TECHNICAL PARAMETERS PAGE 8
SECTION 3
SAFETY PRECAUTIONS PAGE 9
PARTS & ACCESSORIES PAGE 10
SECTION 4
PRODUCT DIAGRAM PAGE 10
CONTROL PANEL PAGE 11
PRECAUTIONS BEFORE INSTALLATION PAGES 12-14
SECTION 5
PRE-OPERATING INSTRUCTIONS PAGES 14-16
SECTION 6
OPERATING INSTRUCTIONS PAGES 17-18
TROUBLESHOOTING PAGES 19-21
SECTION 7
IF HAVE STRANGE SMELL PAGE 22
SECTION 8
SOUND DURING MACHINE OPERATION PAGE 22
SECTION 9
CLEANING AND MAINTENANCE PAGES 23-24
HOW TO STORAGE PAGE 25
GENERAL INFORMATION PAGE3-4
TABLE OF CONTENTS
SECTION 1
INSPECTION AFTER DELIVERY PAGE4
PRECAUTIONS FOR SAFE OPERATION PAGES6-7
SECTION 2
SPECIFICATION PAGE8
SECTION 3
SAFETY PRECAUTIONS PAGE9
PARTS & ACCESSORIES PAGE10
PRESET DATA & PRECAUTIONS PAGES13-14
SECTION 5
INSTALLATION STEPS OF ICE MAKER PAGES15-16
SECTION 6
DISCHARGE SEWAGE STEPS PAGES18
OPERATION INTRODUCTION PAGES19-20
SECTION 7
ERROE CODES & TROUBLESHOOTING PAGE21-22
FAULT SELF-DIAGNOSIS PAGES23-26
CLEANING & MAINTENANCE PAGE28
SECTION 4
CONTROL PANEL PAGE11-12
SECTION 8
SECTION 9
Please take a few minutes to read
this manual carefully.
Proper maintenance and operation of this
machine can provide better service.
INTRODUCTION
GENERAL INFORMATION
1. This ice maker uses advanced production technology and skilled processes,
as well as the strict quality inspection, guarantees the excellent performance of
the ice maker.
2. The compressor of the ice maker is very strong and efficient, it makes the ice
making speed of the ice machine faster.
3. The design of stainless steel makes it look more fashionable and beautiful.
4. The automatic microcomputer control system can make the ice making and
harvest process automatically. It also has fault detection function, make it easier
to troubleshoot. Common faults and solutions are on page 21 - 26. If you still
reply you within 24 hours. Please tell us your order ID in the email.
INSPECTION AFTER DELIVERY
Thank you for choosing our ice maker. In order to ensure a happy shopping
experience for you, please pay attention to the following matters after opening
the package:
1. Dents on the ice machine;
2. Missing parts, such as drain hose...
solutions. Please tell us your order ID in the email.
- 3 -
WARNING DIAGRAMS AND OPERATING
SAFETY INSTRUCTIONS
- 4 - - 5 -
WARNING DIAGRAMS AND OPERATING
SAFETY INSTRUCTIONS
- 5 -
- 6 -
- 7 -
- 8 -
GENERAL INFORMATION
1. The production of this appliance uses advanced production technology and skilled
processes, as well as the strict quality inspection, guarantees the excellent performance
of the appliance.
2. The core component of the ice maker "compressor" we use well-known brand product,
coupled with a reasonable configured refrigeration system, it makes refrigerant cooling
more reliable and lower energy consumption.
3. The metal spray shell is beautiful, corrosion-resistant and easy to clean.
4. The automatic microcomputer control system can make the ice making and harvest
process automatically. It has fault detection function, which makes it more convenient to
use and maintain.
RECEIVING AND INSPECTION
Thank you for choosing our automatic ice maker, to protect your legitimate rights,
please note the following when sign for the receiving:
1. Whether the body of the appliance is in good condition;
2. Whether the accessories are complete.
During the transportation of the appliance, the refrigerant inside the compressor
is possible not injected into the refrigeration pipe due to the dumps and handling.
Once the power resource is connected, the compressor may be damaged in a
short time. Therefore, after its receiving, it is strongly suggested the customers
to allow the appliance correctly located and “stay for 24 hours”, to allow the
refrigerant return to the compressor, and then to install and use it.
- 4 - - 9 -
PRECAUTIONS FOR SAFE OPERATION
!AFTER RECEIVING THE ICE MAKER, LET THE ICE MAKER STAND UPRIGHT FOR 24
HOURS FIRST. OTHERWISE THE COMPRESSOR MAY BE DAMAGED .
Please do not use it outdoors. If necessary, be sure to make the ice maker
waterproof. And avoid direct sunlight, high temperature may cause ice machine failure.
Do not disassemble, repair or modify the ice maker without permission. Fire hazard
or personal injury may be caused by work errors without professors or professional
guidance.
Do not directly spray water on the ice maker, it may cause electric shock or short
circuit.
Do not locate the ice maker in a humid place or a place prone to splashing water, to
avoid the damage to the insulating material, so to prevent leakage or electric shock.
Do not earth the ice maker through a gas pipe, a water main, a telephone line, or a
lightning rod.
Do not insert metallic materials such as wires into the air vents, passage or exhaust
vents of the ice maker, to avoid electric shock or personal injury due to accidental
movement of active parts.
Do not put volatile or flammable substances into the ice maker. Storage of such
substances may cause explosion or fire hazard.
The ice maker should be repaired by professional technicians or under their
guidance.
Please keep the ice maker on a flat ground to avoid equipment failure and danger
caused by inclination.
Please use a power supply that is specified on the ice maker's label.
Disconnect the main plug from the supply socket when the ice maker gets failures.
Continued abnormal operation may cause electric shock or fire hazard.
- 10 -
Please remove the dust from the supply socket before plugging the power plug into it,
to avoid fire hazard.
Keep the ice maker free of obstructions and keep the ventilation open.
Do not store combustion sprays, volatile or flammable substances in the ice maker.
Storage of such substances may cause an explosion or fire hazard.
Do not use the ice maker when handling toxic or hazardous materials or radioactive
materials, as it may harm health and damage the environment.
Disconnect from the main socket before cleaning, maintaining or servicing the
appliance. To prevent electric shock or personal injury.
Do not use other electrical appliances in the ice machine. This appliance contains
flammable materials, and must be handled and recycled by qualified personnel and
institutions when discarded.
Do not damage the refrigeration circuit.
Use a grounded outlet to prevent electric shock. If there is no, the grounded socket
device must be assembled by a professional technician. The unit must be positioned so
that the plug is accessible.
Some models use flammable refrigerants and flammable foaming
agents, so beware of fire (The product is marked "Warning fire"). When
the appliance is abnormal, it must be repaired by professional personnel
and institutions.
Please remove the dust from the supply socket before plugging the power plug into it,
to avoid fire hazard.
Keep the ice maker free of obstructions and keep the ventilation open.
Do not store combustion sprays, volatile or flammable substances in the ice maker.
Storage of such substances may cause an explosion or fire hazard.
Do not use the ice maker when handling toxic or hazardous materials or radioactive
materials, as it may harm health and damage the environment.
Disconnect from the main socket before cleaning, maintaining or servicing the
appliance. To prevent electric shock or personal injury.
Do not use other electrical appliances in the ice machine. This appliance contains
flammable materials, and must be handled and recycled by qualified personnel and
institutions when discarded.
Do not damage the refrigeration circuit.
Use a grounded outlet to prevent electric shock. If there is no, the grounded socket
device must be assembled by a professional technician. The unit must be positioned so
that the plug is accessible.
Some models use flammable refrigerants and flammable foaming
agents, so beware of fire (The product is marked "Warning fire"). When
the appliance is abnormal, it must be repaired by professional personnel
and institutions.
PRECAUTIONS FOR SAFE OPERATION
!
- 6 - - 11 -
AFTER RECEIVING THE PRODUCT, PLEASE BE SURE TO USE IT AFTER 24
HOURS, OTHERWISE IT WILL DAMAGE THE COMPRESSOR.
Do not use the ice maker outdoor. It may cause leakage or electric shock after the ice
maker is wet by rain.
Do not disassemble, repair or modify the ice maker without permission. Fire hazard
or personal injury may be caused by work errors without professors or professional
guidance.
Do not directly spray water on the ice maker, it may cause electric shock or short
circuit.
Do not locate the ice maker in a humid place or a place prone to splashing water, to
avoid the damage to the insulating material, so to prevent leakage or electric shock.
Do not earth the ice maker through a gas pipe, a water main, a telephone line, or a
lightning rod.
Do not insert metallic materials such as wires into the air vents, passage or exhaust
vents of the ice maker, to avoid electric shock or personal injury due to accidental
movement of active parts.
Do not put volatile or flammable substances into the ice maker. Storage of such
substances may cause explosion or fire hazard.
The ice maker should be repaired or installed by professional technicians or under
their guidance.
Please locate the ice maker on a solid ground. To avoid a hazard due to tilting of the
appliance.
Please use a power supply that is specified on the ice maker's nameplate.
Disconnect the main plug from the supply socket when the ice maker gets failures.
Continued abnormal operation may cause electric shock or fire hazard.
TECHNICAL PARAMETERS
Specification
Rated power / frequency
Ice making current
Ice harvest current
Ice cubes number / tray
Protection against electric shock
Water inlet mode
Tap water inlet pressure
Refrigerant / Weight
Insulation materials
Applicable environmental level
Gross / net weight
Product size
DBJ-32A
120V/60Hz
1.9A
2.7A
32
ⅠLevel
Tap water / bucket water
100-800KPa
R134a / 0.24lb
Cyclopentane (C5H10)
SN / N
53.86 / 46.75 LBS
13.78*14.09*24.8 INCH
SAFETY PRECAUTIONS
1. The voltage of this appliance is: 120V~ / 60Hz. If the voltage is unstable or with large
fluctuation, please install a voltage regulator.
2. Make sure the appliance is earthed, and ensure effective earthing, as well as the
earth wire must not be connected to the water pipe or gas pipe.
3. In order to protect the compressor, do not start the appliance again within 5 minutes
after power off.
4. Do not connect other appliances to the same socket.
5. If the power cord is damaged, in order to avoid danger, it must be repaired or
replaced by professionals.
6. The electrical control system has a voltage of more than 36V. If maintenance is
required during using, please have it handled by a professional technician.
WARNING:
Do not operate the ice maker when there is a gas leak in its environment. Fire hazard
may occur due to sparks caused by unplugging or plugging or the start-stop controlled by
the temperature controller, the air source should be cut off first, and allow air to circulate.
- 12 - - 9
SAFETY PRECAUTIONS
1. The voltage of this ice maker is: 120V / 60Hz. Please solve the voltage problem before
installing.
2. In order to protect the compressor, do not start the ice maker again within 5 minutes
after power off.
3. Better not not plug other appliances in the same socket.
4. If the power cord is damaged, in order to avoid danger, it must be repaired or
replaced by professionals.
5. The working voltage of the ice machine is higher than 36V. Please do not disassemble
the ice machine when it is working.
WARNING:
Do not operate the ice maker when there is a gas leak in its environment. Fire hazard
may occur due to sparks caused by unplugging or plugging or the start-stop controlled by
the temperature controller, the gas source should be cut off first, and allow air to circulate
to outdoor.
TECHNICAL PARAMETERS
Specification
Rated power / frequency
Ice making current
Ice harvest current
Ice trays number
Protection against electric shock
Water inlet mode
Tap water inlet pressure
Refrigerant / Weight
Insulation materials
Applicable environmental level
Gross / net weight
Product size
DBJ-32A
120V/60Hz
1.9A
2.7A
32 trays
ⅠLevel
Drinking water / bucket water
100-800KPa
R134a / 0.24lb
Cyclopentane (C5H10)
SN / N
53.86 / 46.75 LBS
13.78*14.09*24.8 INCH
- 8 - - 13 -
-
PARTS & ACCESSORIES
DBJ-32A
ICE MAKER
PRODUCT USE GUIDE
Sealing Tape Water Inlet Plug Blue Buckle
Commercial Ice Maker Ice Shovel Water Inlet Hose Drain Hose Instruction
Snap Spring
PRODUCT DIAGRAM
Control panel
Foot Water drain hose
Water inlet Hose
Dust cover of bucket
water inlet hole
Door of ice bin
Hot air outlet
Sewage outlet
（Drain the water in the water
tank after cleaning） （Drain the melted water in
the ice bin）
Note: the ice machine is gravity drainage, which requires
drainage holes or bottles to collect the water after the ice
melts.
Other manuals for DBJ-32A
1
Table of contents
Other LIFEPLUS Ice Maker manuals
