LifeSpan Kids PE45 User manual

1
PE45
AMAZON MONKEY BARS
OWNER'S MANUAL
IMPORTANT:
This product may contain sharp points and small parts prior to assembly.
The owner’s manual contains safety, assembly, use and maintenance instructions. This product must be assembled by an adult
who has read and understood these instructions. Keep the packaging away from children and dispose of all packaging before use.
For the installer and your children’s safety, it is important to fully read and understand the instructions and safety hazards before
commencing the assembly of the product.
WARNING!
The disassembled product
may contain small parts
which pose a choking hazard
to children under 3.

2
TABLE OF CONTENTS
1. GENERAL SAFETY INSTRUCTIONS 3
1.1 DANGER FOR CHILDREN 3
1.2 RISK OF INJURIES 3
1.3 PRODUCT DAMAGE 4
1.4 ASSEMBLY ADVICE 4
2. SAFETY INSTRUCTIONS 7
3. ASSEMBLY INSTRUCTIONS 9
4. MAINTENANCE 11
5. CLEANING 13
6. WARRANTY 13

3
1 GENERAL SAFETY
This product is intended for indoor and outdoor, domestic use only.
Weight Limit: 50kg per bar
Maximum Fall Height: 1995mm
1.1 DANGER FOR CHILDREN
WARNING! No eating while using the product
Children do not recognize potential dangers from this product. The product must be
stored out of reach of children and pets.
This product may only be used with adult supervision at all times.
The packaging material is not suitable for children due to choking and suffocation
hazards.
1.2 RISK OF INJURIES
Do not use the product if it is damaged or defective. If it is damaged or defective,
please contact a qualified technician.
Check the product before each use. Defective parts must be changed immediately as
they can impair the function and the safety of the product.
No more than one person to use the product at the same time.
Use the product only on even and non-slipping surfaces. Never use it near water and
keep sufficient space around for safety.
Beware of moving parts such as the springs or elastics, which could catch your arms
and legs. Do not place any objects or body parts in the product’s openings.
1.3 PRODUCT DAMAGE
Do not make alterations to the product. Only use original spare parts. Qualified
technicians should only carry out repairs –improper repairs can lead to danger for
the user. Use this product only as described in this manual.

4
Protect the product against splashes, humidity, high temperature and direct sunlight.
1.4 ASSEMBLY ADVICE
The assembly of the product must be done carefully and by an able-bodied adult. If in
any doubt, ask a technically qualified person.
Before you start with the assembly, read the instructions carefully.
Remove all packaging materials and lay down all parts on an open space. This gives
you an overview and simplifies the assembly procedure.
Check with the parts list that all parts are available. Dispose of the packaging
material when the assembly is completed.
Beware that when using tools or doing technical work, there is always a risk of
injuries. Assemble the product with care.
Create a danger free environment; for example, do not let tools lay around the
workspace. Store the packaging material in a way that cannot cause any danger.
After installing the product according to the instruction manual, en sure all screws,
bolts and nuts are correctly installed and tightened and that all joints are secure.
Reasonable space must be kept between the product and possible sources of
danger, such as other equipment swimming pools and fences.
The product must be assembled correctly before use.
Place the product on a level surface at least 2 m from any structure or obstruction
such as a fence, garage or house.
Modifications made to the original product shall be carried out according to the
instructions of the manufacturer.
The product must always be used in a well-lit area.
Do not place anything under the product.
Use gloves during assembly and disassembly.

5
Outdoor products should be equipped with a device that in strong wind conditions
avoid displacement due to wind (e.g. steel bars in the ground or loads like sand bag
or water bags).
In certain areas during winter, snow buildup and the low temperatures can damage
the product. It is recommended to remove snow buildup and to store the product
indoor.
We strongly recommend visual inspections every 3 months to insure the integrity of
the entire product. Replace any parts as necessary.
ANCHORING
Note: the unit can be anchored directly into the ground using the anchors provided.
You may also use cement for additional stability, please follow the below instructions.
d
e
- Install the provided anchors (e) by screwing them in at positions (d)
- Dig a 350mm3 hole in the ground positioned under the feet of the
unit that you wish to concrete anchor.
- Fill hole with cement and insert leg with anchor attached into cement
- A minimum of 5 cm depth below ground level of concrete anchoring is
needed.

6

7
2 SAFETY INSTRUCTIONS
The safety instructions of the product should always be considered and obeyed.
Using the product may result in permanent injury such as paralysis, or even death.
Falling off the product may lead to injuries, particularly to the back, neck or head.
No clothes with hooks or lose parts should be worn or carried during product usage
in order to avoid hooks getting caught and causing injury.
Strong winds can result in the product being blown away or damaged. If strong winds
are predicted the product must be disassembled and moved to a sheltered area or
sufficiently anchored down.
Moving the product whilst assembled may affect the integrity of the frame. Should it
be necessary to move the product, please consider the following:
1.) Force to be evenly spaced around the frame to lift the product off the ground
2.) The product must be carried horizontally
3.) Use caution whilst moving as it could bend the product frame.
Users should be familiar with the assembly manual. This manual contains assembly
guidance; selected precautionary measures as well as recommendations for
servicing and maintenance of the product, in order to ensure a secured and fun use
of the product.
It is the responsibility of the owner or the supervisor to guarantee that all users of the
product are informed sufficiently of all warning references and safety instructions.
For the supervisor:
The supervisor’s role is to make sure users are aware of all safety precautions and that
these precautions are enforced. When a supervisor is not available, the product may be
disassembled or covered to limit access.

8
The product can be only used if it is in good condition, worn or damaged parts should
be replaced.
Objects, which could be dangerous to the user, should be away from the product
Avoid unauthorized and unsupervised use of the product.
Do not use the product under influence of alcohol or drugs (incl. medicines).
Do not use the product as a jumping platform for other articles.

9
3 ASSEMBLY INSTRUCTIONS
PART LIST
C1PC
E4PCS
F36PCS
H8PCS

10
1 2
3
F
1
1
1
2
B
B
A
C
3
H
H
E
E
E
EH
H
I
I
I
D
D
D
D
D
I
D
G
F
G
F
G
GF
G
F
G
F
G
F
GF

11
RECOMMENDATIONS:
The play structure must be securely assembled.
For safety reasons, the cement cubes must be poured 5cm below ground level, at
the frame’s outer angles.
The play structure must not be installed directly on cement, asphalt, or any other
hard surface.
Your play structure must be attached on a flat horizontal surface with a minimum of
2m between it and any structure or obstacle such as a fence, garage house, tree
branches, cloths lines, or electric cables.
4 MAINTENANCE
WARNING: Please keep for future reference
We recommend regular maintenance to be conducted at the beginning of each season as
well as at regular intervals during the usage session for your play equipment to ensure all
main parts/fixings are tightly secured, well-oiled and intact to avoid injury or hazards.
It is of particular importance that this is followed at the beginning of each season as well as
at regular intervals during the usage season
Check the accessories monthly as well as the play equipment’s structure in order to prevent
falling risks.
Check and retighten screws, blots and all other hardware elements as necessary, lubricate
all moving metallic parts. For longer accessory life, we suggest storing them during the
winter.

12
When signs of oxidation and / or rust appear on various metallic parts of your equipment,
sand rusted areas and tubular members and repaint using a non-lead based paint when
required. Replace any parts as necessary.
If your play structure is disassembled, be sure to clearly mark any attached metal plates to
prevent accidents. Check all bolt covers and sharp edges and replace them if necessary.
WOOD ADVICE
Our products are manufactured from premium timber. Great care is taking in selecting,
machining and treating the timber before it is sold to you.
Bear in mind that timber is a natural product and may experience changes throughout the
course of its life. It may:
Develop openings (gaps, slits, apertures, cracks) along the line of the grain. This
occurs due to the moisture content between internal and outer surfaces of the timber.
It is totally acceptable and will not affect the integral strength, life or guarantee of the
product.
Fade as the timber reacts with sunlight. The timber should be treated with a
proprietary product to act as a protective barrier (i.e. a water repellent, oil or paint on
an annual basis)

13
5 CLEANING
Do not use any abrasive cleansers for the cleaning. Use a soft, damp cloth to eliminate dirt
and dust.
6 WARRANTY
AUSTRALIAN CONSUMER LAW
Many of our products come with a guarantee or warranty from the manufacturer. In addition,
they come with guarantees that cannot be excluded under the Australian Consumer law.
You are entitled to a replacement or refund for a major failure and compensation for any
other reasonably foreseeable loss or damage.
You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. Full details of your consumer rights
may be found at www.consumerlaw.gov.au
Please visit our website to view our full warranty terms and conditions:
http://www.lifespankids.com.au/Warranty-Policy-Kids
Please send all warranty and support inquiries through our ticketing system via the email
address: [e-mail].