Lifetime 90056 User manual

Keep this Product ID Number and use when contacting Customer Service:
OWNER’S MANUAL
MODEL N° 90056
COPY

2
Save this owner’s manual for future reference and in the event that
the manufacturer has to be contacted.
**U.S. and Canada customers ONLY**
IF ASSISTANCE IS NEEDED,
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at
1 [phone]
HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)
**Call or visit our Web site for Saturday hours**
Lifetime Products, Inc.
0/"OXs&REEPORT#ENTER"LDG$#LEARFIELD5TAH
**For customers outside the U.S. or Canada, please contact the store for assistance.**
REGISTER YOUR LIFETIME PRODUCT TODAY!
,)&%4)-%302/-)3%4/9/5
We invite you to read our privacy policy at www.lifetime.com
2%')34%2TODAY
4HEREAREBENElTSTOREGISTERINGYOUR,IFETIMEPRODUCT7ITHOURNEWONLINEPRODUCTREGISTRATIONFORM
ITSFASTANDEASY2EGISTERWITHUSATWWWLIFETIMECOMANDENJOYTHESEGREATBENElTS
s2ECEIVEEXCLUSIVEMONEYSAVINGOFFERSFROM"UY,IFETIMECOMOURONLINESTOREASWELL
as NEW product notifications and special closeout promotions!
s)NTHEUNLIKELYEVENTOFAPRODUCTRECALLORSAFETYMODIlCATIONWEWILLNOTIFYYOU
s2EGISTERINGYOURPRODUCTGUARANTEESYOUWARRANTYSERVICE)FYOUDONOTREGISTERYOUR
product, your warranty rights will not be diminished. But you will need to provide a sales
receipt to verify your product purchase date before warranty service will be provided.
Maintaining your privacy is our long-standing policy at Lifetime. And you can rest as-
sured that Lifetime will not sell or provide your personal data to other third parties, or
allow them to use your personal data for their own purposes.
INSTRUCTION #1053853 C 
COPY

3
Most injuries are caused by misuse and/or not following instructions. Use caution when using this product.
To ensure safety, do not attempt to assemble this product without reading and
following all instructions carefully. Check the entire box and inside all packing
materials for parts and/or additional instruction material. Before beginning assembly,
identify and inventory all parts and hardware using the parts and hardware lists and
identifiers in this document. Proper and complete assembly, use and supervision
are essential for proper orientation and to reduce the risk of accident or injury. A
high probability of serious injury exists if this product is not installed, maintained,
and/or operated properly. Failure to comply with any of the warnings in this
instruction manual may result in serious personal injuries such as cuts, broken
bones, nerve damage, paralysis, brain injury, or death. Failure to comply may also
result in property damage. Please heed all warnings and cautions.
&!),52%4/&/,,/74(%3%7!2.).'3-!92%35,4).3%2)/53).*529/202/0%249
$!-!'%!.$7),,6/)$7!22!.49
s)FUSINGALADDERDURINGASSEMBLYUSEEXTREMECAUTION
s4WOCAPABLEADULTSARERECOMMENDEDFORTHISOPERATION
SAFETY INSTRUCTIONS
BEFORE BEGINNING ASSEMBLY
Keep the hardware bags and their contents separate. If any parts
are missing, call our Customer Service Department.
Identify and inventory all parts and hardware using the parts and
hardware lists and identifiers in this document.
Test fit all Bolts by inserting them into their respective holes. If
necessary, carefully scrape away any excess powder coating
buildup from inside the holes. Do not scrape away all of the
powder coating. Bare metal may rust. You may need to pound
some Bolts into place with a hammer or mallet.


TOOLS AND PARTS REQUIRED FOR THIS ASSEMBLY
*Two adults required to
complete assembly*
/NLYADULTSSHOULDSETUPTHEPRODUCT$ONOTALLOWCHILDREN
INTHESETUPAREAUNTILASSEMBLYISCOMPLETE
v7RENCH
(1, included)
!LLEN+EY
(1, included)

5
This area is located at the top,
left-hand corner of the page
and indicates which tools
and hardware are needed to
COMPLETETHEASSEMBLYSTEPS
on a page.
Note:
!
Refer to the following areas throughout the instructions
to assist in the assembly process:
4HISAREAISUSUALLYLOCATEDINTHE
bottom, left-hand corner of a step
and indicates that special attention
is needed to perform a particular
part of a step.
4HESEAREASAREUSUALLYLOCATEDIN
the bottom, right-hand corner of a
step and indicate that damage to
THEPRODUCTORSERIOUSINJURYMAY
occur if the caution or warning is
not heeded. 7!2.).'
ASSEMBLY GUIDES
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CAUTION

6
PARTS LIST
ID Item Description Qty
AJI Backboard 1
!,8 Rim 2
AKZ Net 2
",0 Ball 7
",1 Electronic Scoreboard 1
",2 Electronic Power Source 1
",3 Ball Return Net (not shown) 1
",4 &OLDUP0LATE 2
",5 Bottom Brace 1
",6 Cross Bar 2
",7 ,EAN"AR 1
",8 &RONT,EG 2
",9 -IDDLE,EG 2
",: Rear Cross Brace 2
BMA 2EAR"OTTOM,EG 2
BMB 2EAR-IDDLE,EG 2
BMC 2EAR4OP,EG 2
BOF Side Rail 1
BMD Side Rail with Push Button 1
BME Height Spacer 2
BMF 5PPER-IDDLE,EG 2
"1" Ball Pump and Needle (not shown) 1
"06 0INCH7ARNING3TICKERAPPLIEDTO",4 2
BPU Fold Up Warning Sticker (applied to BMD) 1
ID Item Description Qty
Hardware Blister Pack (1055075)
BMJ 3/8” x 1” Button Head Cap Screw 8
AAF 3/8” Washer 12
BKJ 3/8” Cap Nut 26
AAP #6 x 3/8” Phillips Pan Head Screw 8
BNZ M5 x 15mm Screw 4
BOA M5 Nylock Nut 4
!/1 Allen/ Phillips Key 1
BPW 9/16” Wrench 1
"-, 3/8” x 2” Button Head Cap Screw 6
BMN Retaining Hook 2
BMK 3/8” x 2 1/2” Button Head Cap Screw 4
BMM 3/8” x 3 1/4” Button Head Cap Screw 6
BOC 3/8” x 3 1/2” Button Head Cap Screw 2
BOB 3/8” Plug 4
BPI 1/2” x 1 1/2” Spacer 1
HARDWARE LIST

7
PARTS IDENTIFIER
Parts shown at 5% of Actual Size
!*) (x1)
Backboard
BLU (x1)
Bottom Brace
BLV (x2)
Cross Bar
",7 (x1)
,EAN"AR
BLX (x2)
&RONT,EG
BLY (x2)
-IDDLE,EG
BLZ (x2)
Rear Cross Brace
BMA (x2)
2EAR"OTTOM,EG
BMB (x2)
2EAR-IDDLE,EG
BMC (x2)
2EAR4OP,EG
"/& (x1)
Side Rail
"-& (x2)
5PPER-IDDLE,EG
BMD (x1)
Side Rail with Push Button
(Warning Sticker Applied)
BLQ (x1)
Electronic Scoreboard
BLR (x1)
Electronic Power
Source
W
A
R
N
I
N
G
A
D
V
E
R
T
E
N
C
I
A
A
V
E
R
T
I
S
S
E
M
E
N
T
#
1
0
3
4
7
5
0
BLT (x2)
&OLDUP0LATE
(Warning Sticker
Applied)
Parts shown at 10% of Actual Size

8
PARTS IDENTIFIER
Parts shown at 10% of Actual Size
ALX (x2)
Rim
AKZ (x2)
Net
BLP (x7)
Ball
HARDWARE IDENTIFIER
"!#+"/!2$4/2)-!33%-",9(!2$7!2%
Hardware shown at Actual Size
"-* (x8)
3/8” x 1” Button Head Cap Screw
BMK (x2)
3/8” x 2 1/2” Button Head Cap Screw
!!& (x8)
3/8” Washer
"+* (x8)
3/8” Cap Nut
2%!2&2!-%!33%-",9(!2$7!2%
Hardware shown at Actual Size
BML (x3)
3/8” x 2” Button Head Cap Screw
"+* (x11)
3/8” Cap Nut !!& (x2)
3/8” Washer
BOB (x4)
3/8” Plug
AAP (x8)
#6 x 3/8” Phillips Pan Head Screw
BME (x2)
Height Spacer
BNZ (x4)
15mm M5 Screw
BOA (x4)
M5 Nylock Nut

9
BMN (x2)
Retaining Hook
HARDWARE IDENTIFIER
2%!2&2!-%!33%-",9(!2$7!2%#/.4).5%$
Hardware shown at Actual Size
BMM (x5)
3/8” x 3 1/4” Button Head Cap Screw
&2/.4&2!-%!33%-",9(!2$7!2%
Hardware shown at Actual Size
!!& (x2)
3/8” Washer
"+* (x7)
3/8” Cap Nut
BML (x3)
3/8” x 2” Button Head Cap Screw
BMK (x2)
3/8” x 2 1/2” Button Head Cap Screw
BOC (x1)
3/8” x 3 1/2” Button Head Cap Screw
BOC (x1)
3/8” x 3 1/2” Button Head Cap Screw
BMM (x1)
3/8” x 3 1/4” Button Head Cap Screw
BPI (x1)
1 1/2” x .437” x 1/2” Spacer

10
BACKBOARD TO RIM ASSEMBLY
HARDWARE REQUIRED
PARTS REQUIRED
TOOLS REQUIRED
SEC
1
Parts shown at 10% of Actual Size
Hardware shown at Actual Size
7RENCH
!*) (x1)
Backboard
ALX (x2)
Rim
AKZ (x2)
Net
BLQ (x1)
Electronic Scoreboard
Part shown at 5% of Actual Size
"+* (x8)
3/8” Cap Nut
"-* (x8)
3/8” x 1” Button Head Cap Screw !!& (x8)
3/8” Washer
AAP (x8)
#6 x 3/8” Phillips
Pan Head Screw
BNZ (x4)
15mm M5 Screw BOA (x4)
M5 Nylock Nut
!LLEN+EY

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
11
Remove and discard the plastic shield from the Electronic Scoreboard
(BLQ). Attach the Electronic Scoreboard to the "ACKBOARD!*) with the
hardware shown.
SEC
1.1
Note: Make sure to orient the digital display right side up, and attach
the sensors with white wires to the top positions. The bottom wires are
positioned towards the outside of the scoreboard as shown.
!
!*) BLQ
7HITE7IRES
7RENCH
AAP (x8)
AAP
AAP
BNZ (x4) BOA (x4)
BNZ BNZ
BOA BOA
Bottom wires to the outside

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
12
Attach a Rim (ALX) to the "ACKBOARD!*) with the hardware shown.
SEC
1.2
9/16”
WARNING
Do not overtighten the Cap Nut. If the end of
the Bolt breaks through the plastic cap, call our
Customer Service Department. Exposed threads
on the end of the Bolt may cause serious injuries.
!*)
Note: Repeat this step to assemble the other Rim to the Backboard.
!
ALX
"-*
"+* (x8)
"-* (x8)
!!& (x8)
"+*
!!&

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
13
Attach the Nets (AKZ) to the Rims (ALX) as shown. Then set the Backboard
and Rim Assembly aside until later in the assembly process.
SEC
1.3
./4//,3/2(!2$7!2%2%15)2%$&/24()30!'%
ALX
AKZ


2%!2&2!-%!33%-",9
HARDWARE REQUIRED
SEC
2
Hardware shown at Actual Size
"+* (x11)
3/8” Cap Nut
BMK (x2)
3/8” x 2 1/2” Button Head Cap Screw
BML (x3)
3/8” x 2” Button Head Cap Screw
BMM (x5)
3/8” x 3 1/4” Button Head Cap Screw BMN (x2)
Retaining Hook
!!& (x2)
3/8” Washer
BOB (x4)
3/8” Plug
Parts shown at 10% of Actual Size
BME (x2)
Height Spacer
W
A
R
N
I
N
G
A
D
V
E
R
T
E
N
C
I
A
A
V
E
R
T
I
S
S
E
M
E
N
T
#
1
0
3
4
7
5
0
BLT (x2)
&OLDUP0LATE
PARTS REQUIRED
BOC (x1)
3/8” x 3 1/2” Socket Button Head Cap Screw

15
TOOLS REQUIRED
2%!2&2!-%!33%-",9
PARTS REQUIRED
SEC
2
Parts shown at 5% of Actual Size
BLU (x1)
Bottom Brace
BLY (x2)
-IDDLE,EG
BLZ (x2)
Rear Cross Brace
BMA (x2)
2EAR"OTTOM,EG
BMB (x2)
2EAR-IDDLE,EG
BMC (x2)
2EAR4OP,EG
"-& (x2)
5PPER-IDDLE,EG
7RENCH !LLEN+EY

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
16
SEC
2.1
If the system will be placed under a ceiling that is at least 7 feet 6
inches tall, press down on the push button on the Rear, Middle Leg (BMB)
ANDINSERTTHESWAGEDENDOFTHE2EAR-IDDLE,EGINTOTHEHeight
Spacer (BME) as shown. If the system will be placed under a ceiling that
is 7 feet tall, do not perform this step.
Note: Measure the height of the ceiling to determine whether or not to perform this step.
!
BMB
BME
./4//,3/2(!2$7!2%2%15)2%$&/24()30!'%
Snap push button
into hole
Press down on
push button
Note: Not all push buttons on Rear Frame Assembly will line up with each other.
!
Swaged end

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
17
Press down on
push button
Press down on the push button on the Height Spacer (BME) (or the Rear,
Middle Leg (BMB) if step 2.2 was not performed) and insert the swaged
ENDOFTHE2EAR,EG!SSEMBLYINTOTHERear, Top Leg (BMC) until the push
button snaps into the hole indicated.
SEC
2.2
BMC
Note: Repeat steps 2.1 through 2.3 to assemble the other Rear Leg Assembly.
!
./4//,3/2(!2$7!2%2%15)2%$&/24()30!'%
BME
BMB
Snap push button
into hole

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
18
Attach the Bottom Brace (BLU) to the Rear Bottom Legs (BMA) with the
hardware shown. Make sure the hole in the center of the Bottom Brace is
perpindicular to the ground as pictured. Only fingertighten the 3/8” Cap Nuts
"+* until instructed to tighten all hardware later in the assembly.
SEC
2.3
"+* (x2)
BMM (x2)
9/16”
7!2.).'
Do not overtighten the Cap Nut.
Note: If it becomes difficult to line up the bolts with their appropriate holes, loosen the
hardware until it is fingertight, then tighten all hardware at the end of the assembly.
!
BLU
BMM
BMM
"+*
"+*
BMA
BMA
Bottom Brace Alignment

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
19
Note: When assembled correctly, the lowest push button on the Left Leg will
face a different direction than the lowest push button on the Right Leg.
!
Attach the Rear Bottom Legs (BMA)TOTHE2EAR4OP,EG!SSEMBLIESAS
SHOWN0RESSDOWNONTHEPUSHBUTTONONTHE2EAR"OTTOM,EG and
INSERTTHESWAGEDENDOFTHE2EAR"OTTOM,EGINTOTHERear, Middle Leg
(BMB) until the push button snaps into the hole indicated. Make sure
THEASSEMBLYRESEMBLESTHE3IDE6IEWBELOWBEFOREMOVINGONTOTHE
next step.
BMB
Snap push button
into hole
Press down on
push button
SEC

BMA
BMA
BMB
./4//,3/2(!2$7!2%2%15)2%$&/24()30!'%
Side View

TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
20
Attach the Rear Cross Braces (BLZ)TOTHE2EAR,EG!SSEMBLIESANDTHE
Bottom Brace (BLU) with the hardware shown. Only fingertighten the
hardware until instructed to tighten all hardware later in the assembly.
SEC
2.5
"+* (x3)
BML (x3)
"+*
"+*
"+*
BML
BML
BML
BLZ
BLZ
BLU
9/16”
7!2.).'
Do not overtighten the Cap Nut.
Press down on the push button on the 5PPER-IDDLE,EG"-& and insert
THESWAGEDENDOFTHE5PPER-IDDLE,EGINTOTHEMiddle Leg (BLY) until
the push button snaps into the hole indicated.
SEC
2.6
"-&
BLY
Note: Repeat this step to assemble the other Middle Leg Assembly.
!
Snap push button
into hole
Press down on
push button