Lifetime 90144 User manual

Keep this Identification Number in case you must contact our Customer Service Department.
MODEL N° 90144
OWNER’S MANUAL
Copy

2
Safety Glasses
(1 pair for each person)
TOOLS REQUIRED FOR THIS ASSEMBLY
BEFORE BEGINNING ASSEMBLY
Keep the hardware bags and their contents separate. If any parts are missing, call our Customer Service
Department at 1.800.424.3865.

Instruction #1085745 B 6/01/2011
Copy

3
PARTS LIST
ID Description Qty
CYX Motor Mount Kit Parts Box
CXR Motor Mount 1
CXS Battery Bag 1
CXT Motor Mount Strap Clasp 2
CXU Motor Mount Strap 1
CXV Battery Strap 1
CXW Motor Mount Pin 1
CYW Battery Strap Clasp 1
MOTOR MOUNT KIT PARTS BOX [CYX]
Parts shown at 10% of actual size
PARTS IDENTIFIER
CXR (x1)
Motor Mount
CXU (x1)
Motor Mount Strap
CXT (x2)
Motor Mount Strap Clasp
CYW (x1)
Battery Strap Clasp
CXV (x1)
Battery Strap
CXS (x1)
Battery Bag CXW (x1)
Motor Mount Pin

TOOLS AND PARTS REQUIRED FOR THIS PAGE
4
SEC
CXR (x1)
CYW (x1)
CXV (x1)
CXV
CXR
CYW
SEC
1.1 Thread the Battery Strap (CXV) through the slots in the Motor Mount (CXR) as shown. Finally connect the Battery Strap
Clasp (CYW) to the Battery Strap as shown.
1
1
2
3

TOOLS AND PARTS REQUIRED FOR THIS PAGE
5
SEC
SEC
1.2 Thread the Motor Mount Strap (CXU) through the slots in the Motor Mount as shown
CXU
CXU (x1)
1

TOOLS AND PARTS REQUIRED FOR THIS PAGE
6
SEC
SEC
1.3 Connect one (1) Motor Mount Strap Clasp (CXT) to each end of the Motor Mount Strap as shown.
CXT (x2)
CXT (x2)
1

TOOLS AND PARTS REQUIRED FOR THIS PAGE
7
SEC
1
SEC
1.4 Slide the Motor Mount over the rear end of the Kayak, and attach the Mount to the Kayak using the Motor Mount
Pin (CXW) as shown.
1
CXW (x1)
CXW
Note: The Motor Mount Pin will be held in place by the
battery, attached later in the assembly.
!

TOOLS AND PARTS REQUIRED FOR THIS PAGE
8
SEC
SEC
1.5
SEC
1.6
Help secure the Motor Mount to the Kayak by connecting the Motor Mount Strap Clasps to the two pad eyes as
shown. Tighten Strap securely.
Place the battery into the Battery Bag (CXS) and then onto the Motor Mount as shown.
1
CXS (x1)
Attach the Motor Mount Strap
Clasp to this pad eye.
Attach the Motor Mount Strap
Clasp to this pad eye.

TOOLS AND PARTS REQUIRED FOR THIS PAGE
9
SEC
SEC
1.7 Secure the Battery and Battery Bag to the Motor Mount using the Battery Strap. Thread the Battery Strap
through the two loops on the Battery Bag. Tighten Strap securely. Attach the electric motor to the Motor Mount and the
battery cables to the battery according to the instructions that came with your motor.
1
Always use the battery with the Battery Bag
to help prevent the battery from getting wet.
The Battery Bag and battery must be securely
strapped down to prevent the Motor Mount from
detaching from the Kayak. Failure to heed this
caution could result in the loss or damage of the
motor, battery, and Motor Mount.
CAUTION

10
12
Congratulations on your Lifetime®product purchase. By following the instructions below, your new Lifetime product should
provide you with years of service and enjoyment.
Cleaning and Care
The Kayaks are stain- and solvent-resistant. Most stains can be removed, using a mild soap and a soft-bristled brush.
Abrasive cleaning materials may scratch the plastic and are not recommended. Avoid placing a direct heat source on or
near surfaces unless using a heat barrier. Repair scratches or rust spots on the metal by sanding the affected area lightly;
using a rust preventative spray primer; and finally, spraying with a high-gloss spray enamel paint.
CLEANING & CARE