lilitab H User manual
lilitab H Basic Head Unit
for iPad (2017), Pro 9.7,” Air 1 & 2
Assembly Instructions
v2.0
39 Larkspur Street | Suite B t: 888.705.0190
lilitab H Basic Head Unit for iPad (2017), Pro 9.7,” Air 1 & 2 Assembly Instructions v2.0 2
TABLE OF CONTENTS
Packing List............................................2
Assembly Instructions ...................................3
Functions and Cleaning Instructions .......................4
PACKING LIST
GOT QUESTIONS? WE’RE HERE TO HELP!
EMAIL [email protected] PHONE 888.705.0190
lilitab H Basic Head Unit for iPad (2017), Pro 9.7,” Air 1 & 2 Assembly Instructions v2.0 3
ASSEMBLY INSTRUCTIONS
3. The lightning charge cable should
be routed exactly as shown here.
NOTE: Not routing the cable as shown may
prevent the case from closing properly.
5. Insert your tablet. Connect the charge cable
as shown.
6. Place the faceplate on top of the tablet.
Secure with the 8 security screws and
silver L key provided.
Refer to your lilitab Mount owner’s manual
for instructions on attaching the head unit.
4. Depending on your tablet, you may need to
install bumpers in your rear shell, locations
shown here.
1. Thread the charge and sync cable from
the top of the pole through the metal plate
located in the center of the lilitab head unit
and pull through to the front side.
2. Attach your lilitab head unit to the top of
pole with the four (4) head mount security
screws and silver L key that came with your
mount.
NOTE: Rotating the neck security cover 90° will make
access to the screw openings easier to access.
lilitab H Basic Head Unit for iPad (2017), Pro 9.7,” Air 1 & 2 Assembly Instructions v2.0 4
CLEANING INSTRUCTIONS
1. Spray the Brillianize onto one of
the cloths provided.
WARNING: Other cloth/material may
scratch the surface of your lilitab
2. DO NOT spray directly onto your lilitab!
3. Rub gently in a circular motion to remove
fingerprints and dirt.
WARNING: Applying excess pressure can
scratch the surface of your lilitab.
Cleaning kit available on our
website in the accessories section.
FUNCTIONS
DISABLE POWER BUTTON
The H head has an optional pass-through power
button prefitted. When depressed, this button
actuates the power button on the side of the iPad.
You can disable this function by removing the
power button using the silver L key that comes
with your kiosk as shown.
USING MAGKEY
To put your iPad to sleep, snap your MagKEY,
with the orange side facing up, to the front
on your lilitab. To wake your iPad, remove the
MagKEY and it will resume right where it left off
before it went to sleep.
ATTENTION: The MagKEY functionality requires that
the iPad Cover Lock/Unlock preference is turned on.
You can find this in Settings > Display & Brightness >
iPad Cover Lock/Unlock.
Replacement MagKEYs can be ordered directly from
the website: www.lilitab.com.
Table of contents
Other lilitab Accessories manuals
