LincPlus P2 User manual

I
LincPlus P2
LincPlus P2 Installation Guide
With Linux
Published: February 2020
Version 1.0

II
LincPlus P2
目录
About this guide...................................................................................................................................... 3
How to set BIOS....................................................................................................................................... 3

III
LincPlus P2
About this guide
This guide is designed to install Linux and how to set the configuration on BIOS.For
more info, see the content as below in this guide.
NOTE:Recommend install ubuntu 18.04 and the later version,otherwise may have
trackpad unusable issue on the older version.
How to set BIOS
1. Insert the USB flash drive into the USB port of laptop. Turn on the laptop press
“Delete” until the BIOS setup interface display on the screen. (knock “Delete”
continuously)

IV
LincPlus P2
2. set "Advanced->CPU Configuration->Monitor Mwait" to "Disabled";
3. set"Chipset->South Cluster Configuration->Miscellaneous Configuation->8254
Clock Gating" to "Disabled";
4. Press “F4” ,select “YES” and save the configuration;

V
LincPlus P2
5. Insert the Linux USB flash boot drive into the USB port of laptop. Turn on the laptop
and press "F7" until boot option appears in the screen. (knock "F7" continuously)

VI
LincPlus P2
6. Then you can see the picture appears in the screen. You should choose your USB
flash drive, and press "Enter":
(My USB flash drive is KingstonDataTraveler, so that you can fix the OS out of from your
USB flash drive)
7. Now you can continue to install Linux on the laptop.
Thanks for your kindness!
If you have any question, please feel free to contact us at the e-mail:
[email protected]
Danke für Ihre Freundlichkeit!
Wenn Sie Fragen haben, wenden Sie sich bitte an die E-Mail-Adresse:
[email protected]