LincPlus P3 User manual
I
LincPlus P3
LincPlus P3 Installation Guide
With Linux
Published: April 2020
Version 1.0
II
III
LincPlus P3
目录
About this guide...............................................................................................................................3
How to set BIOS ...............................................................................................................................3
IV
LincPlus P3
About this guide
This guide is designed to install Linux and how to set the configuration on BIOS.For
more info, see the content as below in this guide.
How to set BIOS
1. Insert the USB flash drive into the USB port of laptop. Turn on the laptop press
until the BIOS setup interface display on the screen. (knock
continuously)
V
LincPlus P3
2. set "Advanced->CPU Configuration->Monitor Mwait" to "Disabled";
3. set"Chipset->South Cluster Configuration->Miscellaneous Configuation->8254
Clock Gating" to "Disabled";
VI
LincPlus P3
4. Press “F4” ,select “YES” and save the configuration;
VII
5. Insert the Linux USB flash boot drive into the USB port of laptop. Turn on the laptop
and press "F7" until boot option appears in the screen. (knock "F7" continuously)
LincPlus P3
6. Then you can see the picture appears in the screen. You should choose your USB
flash drive, and press "Enter":
(My USB flash drive is SanDisk, so that you can fix the OS out of from your USB flash
drive)
VIII
7. Now you can continue to install Linux on the laptop.
NOTE:
1. Recommend install ubuntu 18.04 and the later version,otherwise may have trackpad
unusable issue on the older version.
2. Please save your important files before install Linux.
Thanks for your kindness!
If you have any question, please feel free to contact us at the e-mail:
Danke f
ü
r Ihre Freundlichkeit!
Wenn Sie Fragen haben, wenden Sie sich bitte an die E-Mail-Adresse:
IX
Other manuals for P3
1
Table of contents
Other LincPlus Laptop manuals
