
3
Model AT06R AT100R
Input power 6W 100W
Line input 100V 100V
Control mode Trans Trans
Step 11 11
Finish ABS ABS
Relay With DC24V Relay
Accessories M3.5X2.0Screw.....2
Please read the explanation before use or x it.
Dimensions Connections
Attention : The usable wire should be IV and HIV type, whose diameter is 0.8-1.4mm, with
cross-section acreage is 0.5-1.5mm2 criterion wire .The signal is input into IN+ and IN- when
playing music.
When direct current 24V signal input ,not be controlled by volume controller.
1. TECHNICAL INFORMATIONS
Installation steps
1. Install the box in the appropriate position and lead the music signal wire to the box.
2. Take out the volume controller and connect the cabling on its rear panel. Make sure the
cabling is secure.
3 .Remove the panel frame of the volume controller and tighten the screw in correct position.
4. Put the panel frame back to the volume controller to nish the installation.
2. SETTING