Linkman LM-9000AT User manual

Wireless Calling System
Model : LM - 9000AT

The Transmitter's Group ID must be the same as Receiver's Group
2. Setting of Group ID [sw1]
Call Button
[sw1]
[sw1]
[sw2] [sw3]
LED Lamp
Case
Dip / Switch
1. System View
No.1
No.9
No.2
No.10
No.3
No.11
No.4
No.12
No.5
No.13
No.6
No.14
No.7
No.15

mm
g
1) If push to Call SW, call number ID of transmitter will be
transmitted to receiver.
And the Receiver will be indicated call number ID.
2) If clear indicated Call number in Receiver,
push to Clear SW, call number ID of transmitter
will be clear the call number of Receiver.
And will be indicated call number ID of Receiver
will be clear.
(No.01~99)
[sw1] [sw2] [sw3]
tens place
ex1) No.19
units place
0
5
3
1
sw2
4
2
6 7 8 9
sw3
ex2) No.43
sw2 sw3
[sw2, sw3]

Warranty (Please attach this)
Head Office & Factory
www.qufield.com [email protected]

** USER INFORMATION
Acknowledging Special Precautions and the FCC Industry Canada Notice
Cautions
Modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
FCC compliance Information
When used the This device complies with part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received.
Including interference that may cause undesired operation.
.
FCC ID:V6OLMT9000AT