Linkskey LKR-604 User manual

1

LKR-604 Rev.C
Before you start
System Requirements
1. A computer with wired network adapter properly installed.
2. Broadband Internet connection
3. Installed Cable or DSL Modem
4. Web Browser：Internet Explorer 6.0 or higher
Package Contents
1. LKR-604
2. CD-ROM(User Manual)
3. Quick Installation Guide
4. Power Adapter
5. RJ45 Ethernet Cable
A

2
LKR-604 Rev.C
Hardware Installation
1. Power off the router and DSL/Cable modem.
2. Connect one end of the Ethernet cable to the LAN port on
the router. Connect the other end of the Ethernet cable to
the Ethernet port on the computer.
3. Connect one end of the Ethernet cable from DSL/Cable
modem to the WAN port on the router.
B

3
LKR-604 Rev.C
4. Power on DSL/Cable modem firstly, wait for a minute until the
modem is ready then power on the router.
5. Check the LEDs:
a) Once power on the router, Power LED should be on.
b) LAN LED should be on for each active LAN connection.
c) The WAN LED should be on when the DSL/Cable modem
is connected.

4
LKR-604 Rev.C
Configure the Router
Open your web browser, type http://192.168.0.1 in the Address
box, and press Enter
Enter default User Name and Password；admin/admin and then
click OK
C
1
2

5
LKR-604 Rev.C
Click Quick Setup
Select Time Zone and then click Next
3
4

6
LKR-604 Rev.C
Click on the proper Internet Connection type.
Configure the settings based on information provided by your ISP.
Follow the wizard instructions to complete the configuration.
Enter Primary DNS address and Secondary DNS address. Then
click Finish.
The setting is finished and then click Continue.
5
6
7
8