Linon TWIN OVER TWIN User manual

WE ARE HERE TO HELP!
WE DO OUR BEST TO INSURE THAT YOUR FURNITURE ARRIVES IN EXCELLENT CONDITION.
IN THE EVENT THAT A PART IS DAMAGED OR MISSING, LINON HOME DECOR WILL BE HAPPY
TO PROVIDE YOU WITH REPLACEMENT PARTS, AT NO CHARGE, WITHIN 30 DAYS OF
PURCHASE, PROVIDING THE PARTS ARE AVAILABLE IN OUR WAREHOUSE AND THE ITEM
PURCHASED IS PART OF OUR CURRENT INVENTORY. IN ORDER TO RECEIVE REPLACEMENT
PARTS, AT NO CHARGE, YOU MUST PROVIDE PROOF OF PURCHASE WITHIN 30 DAYS.
IF YOU NEED ASSISTANCE WITH ASSEMBLY OR REPLACEMENT PARTS, PLEASE CALL LINON
CUSTOMER SERVICE, PRIOR TO RETURNING THE ITEM TO THE STORE.
OUR OFFICE IS OPEN MONDAY - FRIDAY 9AM -5PM, EASTERN STANDARD TIME.
OUR TOLL FREE CUSTOMER SERVICE NUMBER IS: 1-800-262-1852.
OR VISIT OUR WEB SITE WWW. LINON.COM TO ORDER REPLACEMENT PARTS AND FOR CARE
INSTRUCTIONS ON YOUR NEWLY PURCHASED FURNITURE.
IMPORTANT:
PLEASE READ ALL INSTRUCTIONS IN THIS BOOKLET BEFORE STARTING ASSEMBLY.
MADE IN VIETNAM
FOR LINON HOME DECOR PRODUCTS INC BY V10
ASSEMBLY INSTRUCTIONS
TWIN OVER TWIN
BUNK BED
WITH TRUNDLE DRAWER

HARDWARE PACKAGE COUNT
HARDWARE IDENTIFICATION
ITEM PICTURE DESCRIPTION QTY
1
2
3
4
5
6
7
8
9
10
11
1/4" x 70mm
1/4" x 13mm
04
08
11.8 x 15mm 04
10 x 50mm 06
4 x 30mm 10
01
3.5 x 19mm 40
BOLT (4mm HEX HEAD)
BOLT (4mm HEX HEAD)
BARREL NUT
FLAT HEAD SCREW
WOOD DOWEL
ALLEN WRENCH
FLAT HEAD SCREW
4 x 30mm ROUND HEAD SCREW 02
HANDLE 02
WHEEL 04
04
30mm x 30mm x 18mm METAL PLATE
ASSEMBLY DRAWING "1" THROUGH "11".
SERVICE IF ANY OF THE PARTS ARE MISSING. FOLLOW THE LETTER IDENTIFICATION WHEN READING THE
OF HARDWARE TO MATCH THE QUANTITY NUMBER IN THE HARDWARE LIST COLUMN. CALL CUSTOMER
OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER. COUNT EACH PIECE
IF ANY PARTS ARE MISSING OR DAMAGED IN THIS PACKAGE, LINON HOME DECOR WILL BE HAPPY TO
PROVIDE YOU WITH REPLACEMENT PARTS, AT NO CHARGE, WITHIN 30 DAYS OF PURCHASE, PROVIDING
THE PARTS ARE AVAILABLE IN OUR WAREHOUSE AND THE ITEM PURCHASED IS PART OF OUR CURRENT
INVENTORY. IN ORDER TO RECEIVE REPLACEMENT PARTS, AT NO CHARGE, YOU MUST PROVIDE PROOF
OF PURCHASE WITHIN 30 DAYS.
CALL US TOLL FREE AT 1-800-262-1852. OR VISIT OUR WEB SITE WWW. LINON.COM TO ORDER
REPLACEMENT PARTS AND FOR CARE INSTRUCTIONS ON YOUR NEWLY PURCHASED FURNITURE.
IMPORTANT
PLEASE USE ALL THE HARDWARE MENTIONED ABOVE.
THEY WILL ASSURE THE ITEM STABILITY AND SAFETY.
TOOLS REQUIRED
A STANDARD PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AND AN ALLEN KEY "8" (PROVIDED)
ARE REQUIRED TO ASSEMBLE THIS UNIT. USE A PLASTIC HEAD MALLET TO TAP IN WOODEN DOWELS.
NOTE: A PIECE OF WOOD CAN ALSO BE USED TO KNOCK IN WOODEN DOWELS.
BEFORE ASSEMBLY CLEAN A LARGE AREA TO ASSEMBLE BOTH BEDS, SPREAD NEWSPAPER OR
CARPET FLOOR TO PROTECT THE WOOD FINISH DURING ASSEMBLY.
TEST BUNKBEDS FOR ANY MOVEMENT OR LOOSE SCREWS/BOLTS.
MEASURE INSIDE MATTRESS AREA BEFORE ORDENING YOUR UPPER AND LOWER MATTRESS.

PART IDENTIFICATION:
TRUNDLE BED FRONT PANEL (1 PC)A - E - TRUNDLE BED MIDDLE PLATE (1 PC)
B - TRUNDLE BED LEFT PANEL (1 PC) F - TRUNDLE BED BOTTOM PANEL (4 PCS)
C - TRUNDLE BED RIGHT PANEL (1 PC) G - TRUNDLE BED MATTRESS SUPPORT SLAT (5 PCS)
D - TRUNDLE BED BACK PANEL (1 PC)
STEP 1
1.1 - FIX WHEELS (11) TO TRUNDLE BED LEFT PANEL (B) AND RIGHT PANEL (C) USING FLAT HEAD SCREW (7)
AND A PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED), AS SHOWN ON DRAWING.
1.2 - INSERT WOODEN DOWELS (5) INTO THE PRE-DRILLED HOLES LOCATED AT THE EDGES OF PIECE
TRUNDLE BED LEFT PANEL (B) AND RIGHT PANEL (C) USING THE PRE-DRILLED HOLES AS GUIDE AS SHOWN.
ADULT ASSEMBLY REQUIRED

STEP 2
STEP 3
2.1 - ATTACH TRUNDLE BED BACK PANEL (D) TO TRUNDLE BED LEFT PANEL (B) AND RIGHT PANEL (C)
WITH THE BOLTS (1) AND BARREL NUT (3) AS SHOWN. THE PRE-DRILLED HOLES AND THE WOODEN
DOWELS ALREADY INSERTED AS GUIDE.
3.1 - INSERT THE WOODEN DOWELS (5) THAT ALREADY INSERTED INTO TRUNDLE BED LEFT PANEL (B) AND
RIGHT PANEL (C) INTO THE HOLES OF THE TRUNDLE BED FRONT PANEL (A). ATTACH METAL PLATE (10) TO
TRUNDLE BED LEFT PANEL (B) AND RIGHT PANEL (C) USING BOLTS (2) AND ALLEN WRENCH (6) (PROVIDED),
ATTACH METAL PLATE (10) TO TRUNDLE BED FRONT PANEL (A) USING BOLTS (2) AND ALLEN WRENCH (6)
(PROVIDED).

STEP 4
STEP 5
5.1 - ATTACH TRUNDLE BED BOTTOM PANELS (F) ONTO MATTRESS SUPPORT SLAT (G) WITH FLAT HEAD
SCREWS (7) AND A STANDARD PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED) AS SHOWN.
4.1 - ATTACH A MATTRESS SUPPORT SLAT (G) ONTO THE FRONT PANEL (A) AND BACK PANEL (D) SO THAT IT
TOUCHES THE CORNER (AS CLOSE TO THE LEFT PANEL (B) OR THE RIGHT PANEL (C) AS POSSIBLE) WITH
FLAT HEAD SCREWS (4) AND A STANDARD PHILLIPS HEAD SCREWDRIVER (NOT PROVIDED). ATTACH THE
REST OF THE MATTRESS SUPPORT SLATS (G) ONTO THE FRONT PANEL (A) AND BACK PANEL (D) WITH FLAT
HEAD SCREWS (4).
MATTRESS SUPPORT SLAT (G) MAY REQUIRE THANOTE: T THEY BE PULLED CLOSER TOGETHER OR
FURTHER APART. THIS WILL FACILITATE ASSEMBLY IN THE FOLLOWING STEPS.