LINOVISION 4GPTZ675AI User manual
Setup Guide for 4GPTZ675AI
Nov. 04th, 2021
Ver.2.0
Please prepare the following items:
1. Philips #2 screw driver
2. Compatible Nano SIM card
3. PoE power supply (included) or 12V 2A DC power supply
4. Ethernet cable (If the camera’s powered with PoE power supply)
5. iPhone or Android phone
6. Windows laptop computer with Wifi
SIM Card Installation
1. Open the PTZ rear case by removing 4 Philips #2 screws.
2. Insert the Nano SIM card to cellular module
3. Reinstall the rear case, tighten all 4 screw
Configure 4GPTZ675AI via Mobile Phone
1. Connect your iPhone or Android phone to MIFI_XXXX network
Note: Default password: 1234567890
2. Once connected, Open mobile browser and access 192.168.100.1
Change Language to English, Enter password: admin
3. You should see the following connection status
If you see No SIM Card or SIM Card invalid!, please double check your SIM card.
4. If you are using an international SIM card, you may need to manually configure the APN
a. Click on Network Settings
b. Click on APN, choose Manual and then click on add New
c. Consult your ISP and fill in the proper APN perimeters.
Click on Apply once done.
d. Reboot and confirm your network status as showed in Step 6
5. Please search Guard Viewer in the APP Store or Android Market, then download and install it.
6. Register account for the app.
7. Click"Devices", then"Scan", scan the P2P QR code from the paper version of the quick guide
included with the camera box.
8. After adding the camera, then go to "Live View" to watch the camera live video.
9. More camera settings can be configured through Remote Config.
Configure 4GPTZ675AI via Laptop
1. Connect your laptop to MIFI_XXXX network
Note: Default password: 1234567890
2. Once connected, Open browser and access 192.168.100.1
Change Language to English, Enter password: admin
3. You should see the following connection status
If you see No SIM Card or SIM Card invalid!, please double check your SIM card.
4. If you are using an international SIM card, you may need to manually configure the APN
a. Click on Network Settings
b. Click on APN, choose Manual and then click on add New
c. Consult your ISP and fill in the proper APN perimeters.
Click on Apply once done.
d. Reboot and confirm your network status as showed in Step 6
4. Download and install Guard tool from link below
The Guard tool is for Windows:
https://app.box.com/s/iikv9hba828re1paawm1x3p79wkyaf7f
The Guard tool is for MAC:
https://app.box.com/s/uhdjx8tv06m84x4rxhun0v9p6dgv4p4i
5. Run Guard tool
You will find your camera show up as inactive
6. Open Internet Explorer and Enter the camera IP displayed in the Guard Tool. Or click the browser
icon under the configuration.
7. Enter Username:admin
Default Password: 123456
8. When you Log in for the first time, you will be asked to change your password, Create your new
password, then click on OK.
9. Re-login, Enter Username as admin and your new password and then click on login.
10. You will see the live view.
11. You can configure more camera settings.
Table of contents
Other LINOVISION Digital Camera manuals
