LINOVISION IPC608UW User manual

Underwater Camera
IPC608UW

Contents
1.Connection Guide···················································1
2.Access Camera from WEB Browser ··································1
4
3.Access Camera via NVR ············································
4.Access Camera from GUARD STATION - CMS Software···············7
5.Access Camera from Guard Viewer - Mobile Phone App ··············8

Connection󶀅Guide
Access Camera from WEB Browser
Package Includes
Internet
POE Switch
NVR
Solar and/or
Wireless Transmission
It is an overall connection application diagram, among underwater camera, PoE Switch,
PC,NVR, Sma Phone, etc. Please see below.
Note: the camera also suppo DC12V power supply.
Download EZTools software
Find the Camera IP address
Before you access camera from WEB Browser, please download
the EZTools software to check the Camera IP address.
As long as the camera and the computer are in the same network, the camera will
show in the device list.
Software download link and QR code:
https://app.box.com/s/922sqty5vz4qb1ei3x5k4fnqrzoxgftp
1
2
1

Open the LED light
2
Log In
LED Light Control
Open the IE browser, enter the IP address of the camera, log in with the following
initial information, then you can view and set the camera.
Password: 123456
Noted: If computer software or NVR connect to the camera via the ONVIF protocol,
and images can’t appear, please t to adjust the camera video encoding: H.264/
MJPEG/H.265/H.265+.
Open the LED light
When the environment is dark, click the “Image” and switch to “Night” mode
in Day/Night Mode, the LED light will be turned on.
3
4
User: admin

Open the LED light
Close the LED light
When the environment is bright, click the “Image” and switch to “Day” mode,
the LED light will be turned o.
Adjust the Video Compression, Ima ge Resolution and Frame Rate.5
3

Cancel DHCP and enter “IPv4 Address / IPv4 Subnet Mask / IPv4 Default
Gateway”.
IPv4 Address: 192.168.1.xxx (0-255)
IPv4 Subnet Mask: 255.255.255.0
IPv4 Default Gateway: 192.168.1.1
Noted: The camera is DHCP, when using with NVR, the NVR IP address
needs to be changed to the same network segment as the camera.
2
Ensure the camera has been connected, then do the following steps.
Note:The following information takes the camera IP address: 192.168.1.88 as
an example.
Access Camera via NVR
Click the right mouse button, choose the “Common Menu” and “Network”.
1
4

Click the right mouse button and choose the “Menu”.
3
Click the “Camera”.
4
Find the camera and click the “blued pencil”.
5
5

Enter the “IP Camera Address/Protocol/User Name/Password”
IP Camera Address: 192.168.1.88
Protocol: ONVIF
User Name: admin
Password: 123456
6
After successful addition, the Status will display a blued icon.
7
Click the left mouse button to preview the image.
8
6

Noted: If computer software or NVR connect to the camera via the ONVIF
protocol, and images can’t appear, please t to adjust the camera video
encoding: H.264/MJPEG/H.265/H.265+.
Access Camera from GUARD STATION - CMS Software
After the installation is complete, open the software and add the camera.
Guard Station Initial Information：
User Name: admin
Password: 123456
2
Software download address and QR code.
Windows: https://app.box.com/s/922sqty5vz4qb1ei3x5k4fnqrzoxgftp
MAC: https://app.box.com/s/l9riil986jgo6jkwa3zos8ksdzt52sgi
1
Modify the camera parameters through GUARD STATION.
3
7

Check the real-time video of the camera.
4
Access Camera from Guard Viewer - Mobile Phone App
Click the “Sign Up” to
create a new account
and login with your
account.
2
Through the mobile phone app --
“Guard Viewer”,you can watch the
camera view remotely. Please search
Guard Viewer in the Apple Store or
Android vvMarket, then download
and install it.
1
8

After adding the camera, then go to “Live View” to watch the camera live
video.
4
Click "Devices", then “Scan”, scan the QR code from the camera web browser.
3
9