Linpa T3 User manual
Bluetooth Wireless Earbuds Linpa T3
User Manual
Note
TO ACTIVATE YOUR 12+6 MONTHS WARRANTY
PLEASE VISIT NOW CUSTOMER SERVICE
If the earbuds freeze due to misuse, please press and hold
the earbuds for 10 seconds to reboot the earbuds. Or email
Pair with Your Device：
Tips:
Choose "Linpa T3"
The LED light off
- The earbuds will turn off automatically if there is no
connection within 5 minutes after power on.
- The earbuds will automatically turn off if there is no
playback within 30 minutes after pairing.
- The earbuds will turn off automatically within 5 minutes
when turn off the device Bluetooth after paring.
Connected
Connection
>
Linpa T3
Bluetooth®
Taking the earbuds from the charging
case,the left LED lights flash red and
white,the right LED lights off.(Make sure
tear off ransparent static sticker on the
bottom of the earbuds)
The left and right sides can be used separately. The right earbud is the
secondary, which will take a little longer to connect.
When one side works, how do I switch my earbuds from single mode to stereo
mode?
Pairing issues
Step 1->: Put them back to the case.
Step 2->: Delete “Linpa T3” from Bluetooth menu on your device, if your device has
been connected “Linpa T3” .
Step 3->: Taking the earbuds from the charging case, both earbuds turn on, the LED
lights flash red and white, Double-click any earbud, the two earbuds will be
forced to pair. After the two earbuds are successfully paired, the left light turns
off and the right alternately flashes red and white.
Step 4->: Turn on the phone's Bluetooth and choose "Linpa T3" to pair. The earphones
will automatically pair with the phone afterwards.
Step 5->: If prompted, enter code "0000".
Music
Previous track
Next track
Double click(Left)
Double click(Right)
Short press Play/pause songs
Answer/End CallPress
Reject the callLong press 2 seconds
Reject third party callsLong press 1 second
Connect a new call while retaining the current callDouble click
Controls
Double-click to switch between the second party
and the third party, and there is a 'didi' prompt
when switching calls.
Three-party call
Calling
Take the earbuds from the charging case,
it will automatically turn on. Or manually
press 1s in the off state.
Red and white lights flash
alternately 3 times
Long press 5 seconds Red lights flash 3 times
Turn On/Off
Connected to your phone/device Long press for 2 seconds
and other voice assistants
Activate Siri/Other Voice Control Software
Red light flashes
slowly
Earbud status indicator
Charging case status indicator
LED steady red
LED light off Fully charged
Charging
Low battery
Charging
1Please check the power adaptor if it is 5V with good
quality.
2 Clean the thimble and contacts with alcohol to ensure
that the headphone charging contact is conductive.
1.5 h
LED steady red
LED light off Fully charged
Charging
Charge
FAQ
Q: The sound quality of the headphones is not good?
A: For all of the headphone products, they need a period of use to get better sound
quality. Some components, such as diaphragm unit, transistors, integrated circuits,
and capacitance, and can be stabilized after a period of use.
Q: Why cannot synchronize the volume?
A: Our products are mainly compatible with iPhone, Samsung, and other mainstream
mobile phones, Due to too many Android systems, our headsets cannot match all
types of Android systems. If the volume cannot synchronize, please manually
adjust the volume on the phone or computer.
Q: How to deal with the stuck signal of the earphone?
A: The Bluetooth headphones use the 2.4G frequency band. When it encounters wifi
and the base station signal environment is complex, it will automatically switch to
the most suitable frequency band. To avoid the frequency hopping, Please use your
mobile phone as close as possible to the headphones.
Q: How to keep clear calls?
A: When using with a phone call, please turn the volume to the maximum to avoid
making calls in noisy environments, such as subways and buses. These places will
affect the signal connection and stability of the earbuds.
- The headphone buttons have 3M glue, please do not buckle the button of the headset
to avoid falling off
- Do not store the earphone in extreme temperature(under 0℃or over 45℃).
- Do not use this earphone during a thunderstorm to avoid irregular function and
increased risk of electricshock.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
- Keep the earbuds dry
Maintenance:
Since our product has a built-in battery, and the battery itself has power consumption
issues, please make sure to charge the headset and charging box once a week to
prevent the protection board from protecting itself and causing the battery to run low.
Attention
Model: Linpa T3
Standby Time: One year
Talk/Playing Time: 50 hours (50% volume)
Bluetooth Standard: V5.0
Frequency Range: 2.4GHz
Operating Range: 33 feet/10 meters (No obstacles)
Earphone Battery/Charging Case: 100mah/450mah
Charging Time（Earphones/Charging Case）: 2 hours/1.5 hours
Specifications
Table of contents
