EFM Athos User manual

−SAFETY PRECAUTIONS:
1. Keep this product and its charging cable away from
excessive heat.
2. Do not operate this device with a damaged cable or after
it has malfunctioned or has been damaged in any manner.
3. Do not disassemble this product.
TECHNICAL SPECIFICATIONS:
General Headset Features
Standard Bluetooth Specification V5.0
Bluetooth®Headset Profile Support
Bluetooth® Hands Free Profile Support
Bluetooth® A2DP Profile Support
Bluetooth® AVRCP Profile Support
Support TWS Support
Theoretical range in open field <10m without obstruction
Re-program the firmware None
Battery 3.7V, 55mAh Lithium
polymer Battery (type)
Stand By (Paired mode) 100hrs
Talk Time 4
Battery Charging Case 500mAh
Charging time <2 hours

TURN EARBUDS OFF AND ON:
POWER ON:
Open the Charging Pod and take out the earbuds. You
will hear a soft chime and if successfully connected to a
Bluetooth device the LED indicator atop each earbud will
pulse softly.
POWER OFF:
Simply place the earbuds back into their respective slots and
the earbuds will power o automatically. The LED indicator
will first flash rapidly and then begin to softly pulse to
indicate charging.
PLEASE NOTE:
When the charging pod is out of battery, the earbuds will
not turn on/o automatically when removed from or placed
back into the charging pod. In this case, please recharge the
charging pod.

myefm.com
THE EFM® 2 YEAR WARRANTY:
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a
replacement or refund for a major failure and compensation
for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does
not amount to a major failure.
EFM® will happily repair or replace defective goods for up
to 2 years from the date of purchase. This warranty is against
defects in the EFM® goods purchased and does not cover
damage caused by the incorrect use or installation of the
goods, or by modifications, or by accident.
To claim under the warranty, you need to return the faulty
product to the place of purchase (at your expense) with a
valid proof of purchase. If you are not able to return the
product to the place of purchase, you can contact:
EFM Service Department
61 Belmont Avenue, Belmont WA 6104
P: 1300 069 336 (1300 0 MYEFM)
E: [e-mail]
This warranty is in addition to other rights and remedies of
the consumer under Australian Consumer Law for Consumer
Electronic Devices and Home Entertainment Products.
Important:
The 2 Year Warranty covers EFM® product and not your
device. Whilst we stand by our products, EFM® will not be
liable to any damages caused to your device from accidental
impact.
For more information visit myefm.com

EFM ATHOS true wireless
stereo HD earbuds
user‘s manual
INTRODUCTION:
Thank you for choosing the EFM®Athos TWS HD Earbuds!
You can use this product with all iOS and Android compatible
Bluetooth®devices to stream music and enjoy hands-free
calling. In order to get the best results when using these
earbuds, please read this manual first.
PACK CONTENTS:
− 1 x EFM® Athos TWS (True Wireless Stereo) HD Earbuds
− 1 x TWS Charging pod
− 1 x USB Charging cable
− 1 x User manual
− 3 x Earbud tips (Sizes: Small / Medium / Large)
SPECIFICATIONS:
− Frequency response: 20Hz-20KHz
− Sensitivity: 103±3dB
− Impedance: 16Ω±15%
− Driver: 7mm Dynamic
FEATURES:
− IPX5 Resistance to rain and sweat
− Hands-free function
− 4 hours music and talk time
− Wireless microphone / Tap touch control (10m range)
− Voice commands: Activate Siri or Google Assistant

OVERVIEW DIAGRAM:
Charging Contact
LED Indicator
Battery Level
Indicator
Charging Contact
Input Port
Micro USB
Charging Pod
Microphone Microphone
Right Earbud
LED Indicator
Left Touch Control
Button (LTCB)
Right Touch Control
Button (RTCB)
Left Earbud

HOW TO USE/GENERAL FUNCTIONS:
Desired Result Required Action
Power On Simply remove earbuds from the Charging
Pod, the earbuds will automatically go into
pairing mode.
Power O Place earbuds into the Charging Pod.
Pairing 1. Activate the Bluetooth®function on
our device and select ‘EFM ATHOS’.
The earbuds will automatically pair with
the device.
2. Press the ‘YES’ soft key on the phone
to connect to the headset, pairing is
successful.
3. Earbuds distance range up to 10 metres
and working range is 180 seconds.
Play / Pause Single tap the L/R Touch Control Button.
Next Track Double tap the L/R Touch Control Button
Previous Track Triple tap the L/R Touch Control Button
Answer Phone Call Single tap the Touch Control Button when
a call incoming
End Current Call Double tap the Touch Control Button
during a call.
Reject Incoming
Phone Call
Double tap the Touch Control Button
when a call incoming
General Notes:
Resetting Earbuds
If you have problem to connect the earbuds with your mobile
phone, try resetting your EFM ATHOS device as below;
1. Make sure Bluetooth is turned o on your device.
2. Take out both earbuds from charging pod, when they pair
together successfully, you will hear a soft tone.
3. Touch and hold the TCB on both earbuds for 10 seconds until
you hear a tone. This means that the earbuds have been reset
to as when they left the factory.
4. Follow the instructions to reconnect your mobile device.

CHARGING YOUR ATHOS TWS EARBUDS:
Please use the provided USB cable to connect your Charge
Pod to a source of sucient power via the Micro USB port at
the back of the Charging Pod.
1. CHARGING THE POD
The LED Status Indicators on the back of the Charging
Pod will flash white when charging and stay lit when the
Pod is full.
2. CHARGING THE EARBUDS
When the earbuds are inserted into the Charging Pod,
the white LED indicator on each earbud will light up white
and will go o to indicate that the earbud is full.
CHARGING STATUS
Earbuds LED will disappear when fully charged.
Charging Pod LED will stay lit when fully charged.

WEARING YOUR EARBUDS:
The earbuds come with comfortable silicone buds for your
everyday use. Try all the dierent size earbuds that are
provided in the package to find the best fit for your ears. You
can get the best audio quality when the earbuds seal your ear
canal.
NOTE: Your left and right ears may need dierent size earbuds.
Insert the earbuds with the earbuds directed towards your ear
canal. Twist gently until they fit comfortably and fell secure
in your ears.
CONNECTING EARBUDS TO YOUR PHONE:
1. Take earphone from the charging pod to enter pairing
mode.
2. Turn on Bluetooth®on your phone and select ‘EFM Athos’
to pair with this earphone.
3. When the earbuds are not in the charging pod, and
are powered o, simply put the earbuds back into the
charging case and take them out again. The earbuds will
automatically enter pairing mode.
4. After this earphone is successfully paired with your phone,
TWS can remember up to three Bluetooth devices. You
just need to repeat the above steps to pair with another
Bluetooth device. The earbuds will only automatically
connect with the last paired Bluetooth device.