LiPPERT Embedded Hurricane-QM57 User manual

TME-EPIC-HURQM-R2V4.docx
Revision 2.4 / July 11
© LIPPERT Embedded Computers GmbH
Hans-Thoma-Str. 11
D-68163 Mannheim
http://www.lippertembedded.com/
Hurricane-QM57
EPIC Express Single Board Computer
Technical Manual

TME-EPIC-HURQM-R2V4.docx Revision 2.4
Technical Manual Hurricane-QM57
LiPPERT Document: TME-EPIC-HURQM-R2V4.docx Revision 2.4
Copyright ©2011 LiPPERT Embedded Computers GmbH, All rights reserved
Trademarks
MS-DOS, Windows, Windows 95, Windows 98, Windows NT and Windows XP are trademarks of
Microsoft Corporation. PS/2 is a trademark of International Business Machines, Inc. Intel and Solid
State Drive are trademarks of Intel Corporation. Geode is a trademark of Advanced Micro Devices.
PC/104 is a registered trademark of PC/104 Consortium. All other trademarks appearing in this
document are the property of their respective owners.
Disclaimer
Contents and specifications within this technical manual are subject of change without notice.
LiPPERT Embedded Computers GmbH provides no warranty with regard to this technical manual or
any other information contained herein and hereby expressly disclaims any implied warranties of
merchantability or fitness for any particular purpose with regard to any of the foregoing. LiPPERT
Embedded Computers GmbH assumes no liability for any damages incurred directly or indirectly
from any technical or typographical errors or omissions contained herein or for discrepancies
between the product and the technical manual. In no event shall LiPPERT Embedded Computers
GmbH be liable for any incidental, consequential, special, or exemplary damages, whether based on
tort, contract or otherwise, arising out of or in connection with this user’s guide or any other
information contained herein or the use thereof.
.

TME-EPIC-HURQM-R2V4.docx Revision 2.4 i
Table of Contents
1Overview 1
1.1 Introduction ............................................................................................... 1
Features .................................................................................................... 1
Block Diagram............................................................................................. 2
1.2 Ordering Information .................................................................................... 3
Hurricane-QM57 Models ................................................................................ 3
Cable Sets and Accessories ............................................................................ 3
1.3 Specifications............................................................................................. 4
Electrical Specifications ................................................................................. 4
Environmental Specifications ........................................................................... 4
Mean Time Between Failures ........................................................................... 4
1.4 Mechanical ................................................................................................ 5
2Getting Started 6
2.1 Connector Locations .................................................................................... 6
Top .......................................................................................................... 6
Bottom ...................................................................................................... 7
2.2 Jumper Locations........................................................................................ 8
2.3 LED indicators ............................................................................................ 9
2.4 Hardware Setup.......................................................................................... 10
3Module Description 11
3.1 Processor ................................................................................................. 11
3.2 Platform Controller Hub (PCH)......................................................................... 11
3.3 Graphics-Controller...................................................................................... 12
DisplayPort (DP) Connector (X2, X3)..................................................................12
LVDS Configuration......................................................................................12
LVDS Connector (X27) ..................................................................................13
LVDS Color Mapping ....................................................................................14
Display Backlight Connector (X25)....................................................................14
Display Voltage Selector (X11).........................................................................14
3.4 Gigabit Ethernet Controller ............................................................................. 15

TME-EPIC-HURQM-R2V4.docx Revision 2.4 ii
Ethernet Connector (X8, X29) ..........................................................................15
3.5 USB 2.0 Ports ............................................................................................ 16
USB Connectors (0-3 & 8-9, exemplary described USB 0/1, X12, X13, X14) .................16
USB Connectors (4-7, exemplary described USB 4/5, X28, X31) ...............................16
3.6 Serial ATA Ports.......................................................................................... 17
SATA Connector (X15, X16, X17, X19) ...............................................................17
3.7 Audio ....................................................................................................... 17
Audio Connector (X10) ..................................................................................18
3.8 PCI/104-Express Bus Interface........................................................................ 18
PCI/104-Express Connector (X18) ....................................................................19
3.9 PC/104-Plus Bus Interface ............................................................................. 21
PC/104-Plus Connector (X32) .........................................................................22
3.10 PCIe Mini-Card (X9) ..................................................................................... 23
3.11 On Board Power Supply ................................................................................ 24
Power Connector (X26) .................................................................................24
Real Time Clock Backup ...............................................................................24
3.12 System Panel Connector (X5).......................................................................... 25
SMBus/I²C ................................................................................................25
Power-Button.............................................................................................25
Reset-Button .............................................................................................26
HDD-LED ..................................................................................................26
Watchdog .................................................................................................26
Power-LED ................................................................................................27
GPIO’s .....................................................................................................27
3.13 Backup BIOS ............................................................................................. 27
Backup BIOS Connector (X24) ........................................................................27
3.14 LPC Bus ................................................................................................... 28
LPC Connector (X4) .....................................................................................28
3.15 LEMT functions........................................................................................... 28
Board Specific LEMT functions........................................................................29
3.16 CPU Fan Connector (X20) .............................................................................. 31
3.17 Chassis Fan Supply (X21) .............................................................................. 31
4Using the Module 32

TME-EPIC-HURQM-R2V4.docx Revision 2.4 iii
4.1 BIOS........................................................................................................ 32
Configuring the Phoenix BIOS
.........................................................................32
Initialize BIOS at first startup
...........................................................................32
Booting from alternative device
.......................................................................32
EFI Shell
...................................................................................................33
Jumper BIOS Defaults
..................................................................................33
BIOS Screens
.............................................................................................34
Phoenix – SecureCore BIOS - Main 34
Phoenix – SecureCore BIOS – Main – System Information 34
Advanced 35
Advanced – Boot Configuration 35
Advanced – ACPI Configuration 36
Advanced – Processor Configuration 36
Advanced – Processor Configuration – Processor Power Management 37
Advanced – Peripheral Configuration 37
Advanced – HDD Configuration 38
Advanced – IMC Configuration 38
Advanced – IMC Configuration – NB Common Configuration 39
Advanced – IMC Configuration – NB Common Configuration – VT for Directed I/O 39
Advanced – IMC Configuration – NB Common Configuration – Video Configuration 40
Advanced – IMC Configuration – Arrandale Config 40
Advanced – IMC Configuration – Arrandale Config – PEG Configuration 41
Advanced – IMC Configuration – Arrandale Config – IGD Config 41
Advanced – IMC Configuration – Arrandale Config – IGD Config – Boot Type 42
Advanced – IMC Configuration – Arrandale Config – IGD Config – Panel Type 42
Advanced – South Bridge Config 43
Advanced – South Bridge Config – SB PCI Express Config 43
Advanced – South Bridge Config – SB PCI Express Config – PCI Express Root Port144
Advanced – Network Configuration 44
Advanced – SMBIOS Event Log 45
Advanced – ME Configuration 45
Advanced – Thermal Configuration 46
Advanced – Thermal Configuration – Processor Thermal Management Submenu 46
Advanced – Thermal Configuration – Intelligent Power Sharing 47
Advanced – Thermal Configuration – Platform Thermal Configuration 47
Security 48
Boot 48
Exit 49
4.2 Drivers ..................................................................................................... 49

TME-EPIC-HURQM-R2V4.docx Revision 2.4 iv
5Address Maps 50
5.1 Memory Address Map .................................................................................. 50
5.2 I/O Address Map ......................................................................................... 51
5.3 Interrupts .................................................................................................. 53
5.4 DMA Channels............................................................................................ 53
6Troubleshooting 54
Contact Information A
Getting Help B
Additional Information C
Revision History D

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 1 of 54
1Overview
1.1 Introduction
The Hurricane-QM57 offers a high performance EPIC board with the i7-620UE, i7-610E and Celeron P4505
Processor Series from Intel®
Two Ethernet GbE ports, six USB 2.0 host ports and two Power-USB 2.0 host ports handle the communication
with external devices. Four SATA ports allow connection of hard disk or CD drives.
Core™. This processor is a next generation of 64-bit, multi-core mobile processor
built on 32-nanometer process technology. Based on the low-power/high-performance Nehalem micro-
architecture, the Arrandale processor is designed for a two-chip platform as opposed to the traditional three-chip
platforms (processor, GMCH, and ICH). The two-chip platform consists of a processor and the Platform Controller
Hub (PCH) and enables higher performance, lower cost and easier validation. In this case the PCH is Intel’s Ibex
Peak-M (Mobile Intel® 5 Series Chipset).
System expansion can easily be realized over PCI/104-Express, PC/104-Plus, I²C bus and Mini-PCI connectors.
The Hurricane-QM57 runs DOS, Windows and Linux operating systems.
Features
•Intel Arrandale™
CPU
•Cache Memory with:
•32 KB/32 KB level 1 I/D caches
•256 KB level 2 I/D cache
•
Up to 4 MB level 3 I/D cache
•soldered 1GB DDR3 RAM
Main Memory
•Intel® 5 Series Chipset (formerly Ibex Peak-M)
Chipset
•1 x PC/104-Plus Bus
Extension slots
•
1 x PCI/104Express Bus
•4 x SATA
Interfaces
•6 x USB 2.0 ports
•2 x Power-USB 2.0 ports
•2 x Ethernet GbE
•SPDIF Out
•7.1 Audio
•
MiniPCI-Express
•DisplayPort
•18/24 Bit LVDS for displays
•MISC signals: external power button, external reset
button, I²C bus, GPIO’s, external HDD and Power
LED, LPC
•Power supply
•Lippert Enhanced Management Technology (LEMT)
Other configurations are possible. Please contact your local LiPPERT representative to discuss requirements.

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 2 of 54
Block Diagram

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 3 of 54
1.2 Ordering Information
Hurricane-QM57 Models
Order number
Description
714-0006-10 Hurricane-QM57 with Intel i7-620UE, 1.06 GHz, low power consumption, 2 GB DDR3 RAM
onboard, 8x USB2.0, 2x POWER-USB2.0, SPDIF Out, 7.1 Audio, 4x SATA, SMC, PCI/104-
Express bus, PC/104+ bus, DisplayPort, LVDS Interface, 2x Ethernet GbE, LPC.
Operating temp. range: -0°C…+60°C
814-0006-10 Hurricane-QM57 with Intel i7-620UE, 1.06 GHz, low power consumption, 2 GB DDR3 RAM
onboard, 8x USB2.0, 2x POWER-USB2.0, SPDIF Out, 7.1 Audio, 4x SATA, SMC, PCI/104-
Express bus, PC/104+ bus, DisplayPort, LVDS Interface, 2x Ethernet GbE, LPC.
Operating temp. range: -20°C…+60°C
914-0006-10 Hurricane-QM57 with Intel i7-620UE, 1.06 GHz, low power consumption, 2 GB DDR3 RAM
onboard, 8x USB2.0, 2x POWER-USB2.0, SPDIF Out, 7.1 Audio, 4x SATA, SMC, PCI/104-
Express bus, PC/104+ bus, DisplayPort, LVDS Interface, 2x Ethernet GbE, LPC.
Operating temp. range: -40°C…+85°C
714-0007-10
Hurricane-QM57 with Intel i7-610E, 2.53 GHz, low power consumption, 2 GB DDR3 RAM
onboard, 8x USB2.0, 2x POWER-USB2.0, SPDIF Out, 7.1 Audio, 4x SATA, SMC, PCI/104-
Express bus, PC/104+ bus, DisplayPort, LVDS Interface, 2x Ethernet GbE, LPC.
Operating temp. range: 0°C…+60°C
814-0007-10 Hurricane-QM57 with Intel i7-610E, 2.53 GHz, low power consumption, 2 GB DDR3 RAM
onboard, 8x USB2.0, 2x POWER-USB2.0, SPDIF Out, 7.1 Audio, 4x SATA, SMC, PCI/104-
Express bus, PC/104+ bus, DisplayPort, LVDS Interface, 2x Ethernet GbE, LPC.
Operating temp. range: -20°C…+60°C
914-0007-10 Hurricane-QM57 with Intel i7-610E, 2.53 GHz, low power consumption, 2 GB DDR3 RAM
onboard, 8x USB2.0, 2x POWER-USB2.0, SPDIF Out, 7.1 Audio, 4x SATA, SMC, PCI/104-
Express bus, PC/104+ bus, DisplayPort, LVDS Interface, 2x Ethernet GbE, LPC.
Operating temp. range: -40°C…+85°C
Note:
Custom combinations of processor and memory are possible.
Minimum order quantities are required.
Cable Sets and Accessories
There are some options available for the Hurricane-QM57. Please check their availability before ordering.
Order number
Description
760-0027-10 RAM, unbuffered ECC, RSOMM, REVERSE, 2GB
Operating temp. range: -0°C…+60°C
860-0027-10 RAM, unbuffered ECC, RSOMM, REVERSE, 2GB
Operating temp. range: -20°C…+60°C
960-0027-10 RAM, unbuffered ECC, RSOMM, REVERSE, 2GB
Operating temp. range: -40°C…+85°C
862-0058-10 Cable, DF13-8S (1,25mm) to 2x USB (A)
862-0065-10 Cable, IDC16 (2mm) to 5x audio female, 2x cinch female, 200mm length

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 4 of 54
1.3 Specifications
Electrical Specifications
Supply voltage ATX power supply with 5V, 5V always, 3.3 volt. 12 volt DC
Rise time < 10
ms
Supply voltage tolerance ± 5% *
Inrush current +5VSB: 1.0A
+5V: 0.5A
+3.3V: 0.2A
+12V: 2.5A
Supply current maximum** typical (idle) typical (S3)
+5VSB
0.14
0.14
0.22
+5V 0.10 0.10 -
+3.3V 0.12 0.12 -
+12V
3.11
1.31
-
* With that tolerance it is not mentioned that all plugged devices are running with.
** That rate of current is possible when only monitor, mouse and keyboard are plugged.
The current increases if additional peripheral devices are connected.
Environmental Specifications
Operating:
Temperature range 0 … 60 °C (standard version)
-20 … 60 °C (industrial version)
Temperature change max. 10K / 30 minutes
Humidity (relative) 10 … 90 % (non-condensing)
Pressure 450 … 1100 hPa
Non-Operating/Storage/Transport:
Temperature range -40 … 85 °C
Temperature change max. 10K / 30 minutes
Humidity (relative) 5 … 95 % (non-condensing)
Pressure 450 … 1100 hPa
Mean Time Between Failures
MTBF at 25°C 128,820 hours

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 5 of 54
1.4 Mechanical
Dimensions (L x W) 165 mm x 115 mm
Height max. 40 mm on top side above PCB
max. 12 mm on bottom side above PCB
Weight 275 g
Mounting 4 mounting holes for PCB
4 mounting holes for PCI/104-Express/PC104+ extension cards
Note
It is strongly recommend using plastic spacers instead of metal spacers to mount
the board. With metal spacers, there is a possible danger to create a short circuit
with the components located around the mounting holes.
This can damage the board!

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 6 of 54
2Getting Started
2.1 Connector Locations
Top
The pin 1 of the connectors is marked
Serial ATA
Port 0
X15
Serial ATA
Port 1
X16
Serial ATA
Port 2
X17
Serial ATA
Port 3
X19
HD Audio
X10
SMC-Service
Connector
X30
SPDIF
X1
GBit Ethernet
X29
GBit Ethernet
X8
2 x Power USB
Port 8/9
X14
2 x USB
Port 2/3
X13
2 x USB
Port 0/1
X12
DisplayPort
Port D
X3
DisplayPort
Port C
X2
PCI/104-Express
Bus Interface
X18
PC/104-Plus
Bus Interface
X32
Power
Connector
X26
RSOMM
Connector
X6
Backup BIOS
Connector
X24
Mini PCI Express
X9A

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 7 of 54
Bottom
The pin 1 of the connectors is marked
LVDS
Connector
X27
Display Backlight
Connector
X25
CPU Fan
Connector
X20
Chassis Fan
Connector
X21
LPC
Connector
X4
2 x USB
Port 6/7
X31
2 x USB
Port 4/5
X28
System Panel
Connector
X5

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 8 of 54
2.2 Jumper Locations
Jumper X5
Jumper CMOS
X22
Jumper Display Voltage
Selector
X11

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 9 of 54
2.3 LED indicators
To facilitate problem solving, the Hurricane-QM57 provides LED indicators for the following conditions:
LED Name Function
1 WD Watchdog activated
2 STB Standby Power Supply
3 POM Power Mode
4 MP Main Power Supply
5 SATA SATA accesses (Hard Disk Drive)
6 WAN Status of wireless add-in card (WAN)
7 LAN Status of wireless add-in card (LAN)
8 PAN Status of wireless add-in card (PAN)
6
7
8
5
1
2
3
4

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 10 of 54
2.4 Hardware Setup
Installing the Hurricane-QM57 is very straightforward. First, unpack the board observing the usual electrostatic
discharge (ESD) precautions.
Caution
Before you touch the board, make sure that you have discharged yourself and your
gear towards a grounded terminal. Damages due to ESD are usually not immediately
visible and will only show up later as failures in the field.
Mount the cooling device.
Caution
Never operate the Hurricane-QM57 without suitable cooling devices. Failing this can
destroy the module.
Caution
Never connect or disconnect peripherals like hard drives while the board's power
supply is connected and switched on!
Connect the Hurricane-QM57 to a DisplayPort monitor. Connect USB keyboard or mouse, respectively. Connect a
hard drive with a SATA cable to start an operation system. Make sure that the pins match their counterparts
correctly and are not twisted! If you plan to use additional other peripherals, now is the time to connect them, too.
Connect a standard ATX power supply to the power connector and switch the power on.
Note
The ampere values in chapter 1.3 are the minimum you should have for the standard
peripherals mentioned. If you want to use more and/or others, please plan your
power budget first! The system will not work if there is not enough supply current for
all your devices.
The display shows the BIOS messages. If you want to change the standard BIOS settings, press the <F2> key to
enter the BIOS menu. See chapter 4 for setup details.
If you need to load the BIOS default values, the jumper “CMOS” have to be plugged during startup. This forces the
BIOS to load the factory settings from Flash.
The Hurricane-QM57 boots from CD drives, USB floppy, USB stick, hard disk or network. Provided that any of
these is connected and contains a valid operating system image, the display then shows the boot screen of your
operating system.
Note
Not all USB devices are suitable to boot the Hurricane-QM57. If there are problems,
please try to use another device from another manufacturer.

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 11 of 54
3Module Description
3.1 Processor
Intel Core i7-620UE, i7-610E and Celeron P4505 Processor Series is the next generation of 64-bit, multi-core
mobile processor built on a 32- nanometer process technology. Throughout this document, Intel®CoreTM i7-620UE,
i7-610E and Celeron P4505 Processor Series may be referred to as simply the processor. The processor is
designed for a two-chip platform as opposed to the traditional three-chip platforms (processor, GMCH, and ICH).
The two-chip platform consists of a processor and the Platform Controller Hub (PCH) and enables higher
performance, lower cost, easier validation, and improved x-y footprint. The PCH may also be referred to as Mobile
Intel® 5 Series Chipset (formerly Ibex Peak-M). Intel®CoreTM i7-620UE, i7-610E and Celeron P4505 Processor
Series is designed for the Intel®CoreTM
Included in this family of processors is an integrated graphics and memory controller die on the same package as
the processor core die. This two-chip solution of a processor core die with an integrated graphics and memory
controller die is known as a multi-chip package (MCP) processor.
i7 processor based low-power platform and is offered in a BGA1288
package.
Processor feature details:
•Two execution cores
•A 32-KB instruction and 32-KB data first-level cache (L1) for each core
•A 256-KB shared instruction/data second-level cache (L2) for each core
•Up to 4-MB shared instruction/data third-level cache (L3), shared among all cores
Interfaces:
•System Memory Support
•dual-channel memory organization mode
•Memory DDR3 data transfer rate of 1066 MT/s
•1-Gb, and 2-Gb DDR3 DRAM technologies for x16 devices
•PCI Express*
•The processor PCI Express* port(s) are fully-compliant to the PCI Express Base Specification, Revision
2.0 at 2.5GT/s.
•The processor supports:
-One 16-lane PCI Express port for graphics or I/O.
-Two 8-lane PCI Express ports for graphics or I/O.
•PCI Express Port 0 is mapped to PCI Device 1.
•PCI Express Port 1 is mapped to PCI Device 6.
For further information, please refer to the data book of the Intel®CoreTM
3.2 Platform Controller Hub (PCH)
i7-620UE, i7-610E and Celeron P4505
Processor Series.
The PCH provides extensive I/O support. Functions and capabilities include:
•PCI Express* Base Specification, Revision 2.0 support for seven ports
•PCI Local Bus Specification, Revision 2.3 support for 33MHz PCI operations (supports up to four Req/Gnt
pairs)
•ACPI Power Management Logic Support, Revision 3.0b
•Enhanced DMA controller, interrupt controller, and timer functions
•Integrated Serial ATA host controllers with independent DMA operation on four ports
•USB host interface with support for thirteen USB ports; two EHCI high-speed USB 2.0 Host controllers and 2
rate matching hubs
•Integrated 10/100/1000 Gigabit Ethernet MAC with System Defense
•System Management Bus (SMBus) Specification, Version 2.0 with additional support for I2C devices
•Supports Intel® High Definition Audio
•Supports Intel® Rapid Storage Technology
•Supports Intel® Active Management Technology
•Supports Intel® Virtualization Technology for Directed I/O
•Supports Intel® Trusted Execution Technology
•Supports buffered mode generating extra clocks from a clock chip
•Analog and Digital Display ports
-DisplayPort 1.1

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 12 of 54
-LVDS
•Low Pin Count (LPC) interface
3.3 Graphics-Controller
The integrated graphics controller contains a refresh of the fifth generation graphics core
• Intel® Dynamic Video Memory Technology (Intel® DVMT) support
• Intel® Graphics Performance Modulation Technology (Intel® GPMT)
• Intel® Smart 2D Display Technology (Intel® S2DDT)
• Intel® Clear Video Technology
— MPEG2 Hardware Acceleration
— WMV9/VC1 Hardware Acceleration
— AVC Hardware Acceleration
— ProcAmp
— Advanced Pixel Adaptive De-interlacing
— Sharpness Enhancement
— De-noise Filter
— High Quality Scaling
— Film Mode Detection (3:2 pull-down) and Correction
— Intel® TV Wizard
DisplayPort (DP) Connector (X2, X3)
Connector type: Molex 47272-0021
Pin
Signal
Pin
Signal
1 TD0+ 2 GND
3 TD0- 4 TD1+
5 GND 6 TD1-
7 TD2+ 8 GND
9
TD2-
10
TD3+
11
GND
12
TD3-
13 CONFIG1 14 CONFIG2
15 AUX+ 16 GND
17 AUX- 18 HPDET
19 GND (RETURN) 20 +V3.3V
LVDS Configuration
The Hurricane-QM57 supports 3,3V and 5V LVDS displays with 18/24bit interfaces and unconventional signal
configuration. The display type and resolution can be selected in BIOS setup:
Advanced àIMC Configuration à
Arrandale Configuration àIGD Configuration àPanel Type.

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 13 of 54
The display options of LVDS are shown in the table:
Setting
Possible Values
Flat Panel Type LVDS
Resolution 640x480, 800x600, 1024x768, 1280x1024, 1400x1050,
1600x1200, 1200x768, 1600x1050, 1920x1200
Data Bus Type 18/24 Bits, 2ppc
Refresh Rate 60 70, 72, 75, 85, 90, 100 Hz
HSYNC Polarity High, Low
VSYNC Polarity High, Low
LP Active Period Active Only àonly active during SYNC
Free Running àalways active
SHFCLK Active Period Active Only àonly active during SYNC
Free Running àalways active
To ease usage of these displays it’s possible to select the display and backlight supply voltages with the onboard
voltage selector jumpers. (Jumper LVDS and Backlight, see below)
LVDS Connector (X27)
Connector type: DF14-30P-1.25H (Hirose)
Pin
Signal
1 VDD (3.3 V, opt.5 V)
2 VDD (3.3 V, opt.5 V)
3
GND
4 GND
5
TXA3 -
6 TXA3 +
7 TXACLK -
8 TXACLK +
9 GND
10 TXA2 -
11 TXA2 +
12 TXA1 -
13 TXA1 +
14 TXA0 -
15
TXA0 +
16 GND
17 TXB3 -
18 TXB3 +
19 TXBCLK -
20
TXBCLK +
21 GND
22 TXB2 -
23 TXB2 +
24 TXB1 -
25 TXB1 +
26 TXB0 -
27 TXB0 +
28 GND
29 LVDS DDC-CLK
30 LVDS DDC-DATA
Caution
The maximum current on all supply pins is 1A!
"A" and "B" in the signal names denote
the two possible LVDS channels.

TME-EPIC-HURQM-R2V4.docx Revision 2.4 Page 14 of 54
LVDS Color Mapping
Display Backlight Connector (X25)
Connector type: Hirose DF13 8 Pin
Display Voltage Selector (X11)
Jumper for voltage selection of LVDS and Backlight.
Connector type: IDC6 jumper 2.00 mm.
Use a 2mm jumper between 1-3 or 3-5 to select the display voltage.
Use a 2mm jumper between 2-4 or 4-6 to select the backlight voltage.
Pin
Signal
Pin
Signal
1 +3,3V DC 2 +12V DC
3 Display voltage 4 Backlight voltage
5 +5V DC 6 +5V DC
Default jumper setting is 3,3V for LVDS display and 12V for the inverter.
Note
An arrow on the PCB marks Pin 1
1
2
3
4
5
6
7
CLKA
1 1 0 0 0 1 1
A0
G2 R7 R6 R5 R4 R3 R2
A1
B3 B2 G7 G6 G5 G4 G3
A2
DE VS HS B7 B6 B5 B4
A3
0/B1 B1 B0 G1 G0 R1 R0
CLKB
1 1 0 0 0 1 1
B0
G2 R7 R6 R5 R4 R3 R2
B1
B3 B2 G7 G6 G5 G4 G3
B2
DE VS HS B7 B6 B5 B4
B3
0/B1 B1 B0 G1 G0 R1 R0
Pin
Direction
Signal
1 Output +12 V DC, max. 1A
2 Output +12 V DC, max. 1A
3 Output +5 V DC, max. 1A
4 Output +5 V DC, max. 1A
5 Output Signal: Backlight Brightness Control (level: 3.3 V)
6 Output Switched Inverter Power, max. 1A (refer to “
Display Voltage Selector” below)
7 GND
8 GND
Table of contents
Other LiPPERT Embedded Motherboard manuals