Liquid Ears LEWACWLA User manual

USER MANUAL
LEWACWLA, LEWACWHA
MINI LED
ALARM CLOCK

Display
Press SET button to change display:
SIDE 2
TIME DATE ALARM 1
ALARM 2 ALARM 3 TEMPERATURE

Set Time
1. Change display to TIME mode
2. Press and hold SET button for 2
seconds to enter EDIT mode
3. Use UP/DOWN buttons to choose 12
hour or 24 hour display
4. Press SET button once then use
UP/DOWN buttons to adjust Hour
5. Press SET button once then use
UP/DOWN buttons to adjust
Minutes
6. Press SET button once to Exit

Set Date
1. Change display to DATE mode
2. Press and hold SET button for 2
seconds to enter EDIT mode
3. Use UP/DOWN buttons to adjust
Year
4. Press SET button once then use
UP/DOWN buttons to adjust Month
5. Press SET button once then use
UP/DOWN buttons to adjust Day
6. Press SET button once to Exit

Set Alarm
1. Change display to ALARM mode
2. Press UP button to activate alarm
(“oN A1” will appear on the display)
3. Press and hold SET button for 2
seconds to enter EDIT mode
4. Use UP/DOWN buttons to adjust Hour
5. Press SET button again then use
UP/DOWN buttons to adjust Minutes
6. Press SET button to Exit
7. Repeat process for Alarm 2 and Alarm 3
Note
* Alarm will sound at the set time each
day until deactivated
** Press any button to silence alarm

Deactivate Alarm
1. Change display to ALARM mode
2. Press UP button to deactivate alarm
("-- A1" will appear on the display)
3. Repeat process for Alarm 2 and Alarm 3
Set Temperature
1. Change display to TEMPERATURE
mode
2. Press and hold DOWN button for 2
seconds to switch between Celsius (°C)
and Fahrenheit (°F)
3. Press SET button to Exit

Display Mode
Press UP button to change default
display mode:
dP-1: Display will show TIME mode for
10 seconds then DATE and
TEMPERATURE modes for 2
seconds each
dP-2: Display will show TIME, DATE,
ALARM, or TEMPERATURE mode
based on your selection
dP-3: Display will default to TIME mode
after 15 seconds of no activity

Power Save Mode
1. Change display to TIME mode
2. Press DOWN button to activate
Power Save Mode (“oN Sd” will
appear on the display)
3. Display will turn off after 10 seconds
of inactivity
4. Display will turn on again when clock
is touched or loud noise created
5. To deactivate Power Save Mode
change display to TIME mode and
press DOWN button twice ("--Sd"
will be displayed)

Clock Memory
When batteries are installed, the clock
can be unplugged from the power outlet
and moved to a new location without
losing the set time.
Batteries Required:
3 x AAA Batteries
CAUTION: Don’t mix old and new batteries. Do
not mix standard (super heavy duty/alkaline),
rechargeable and lithium batteries. Remove
batteries when not in use for a prolonged period
of time.

Do not dispose of batteries in fire, batteries
may leak and explode. Do not recharge
non-rechargeable batteries.
Swallowing may lead to serious injury due to
chemical burns. If you suspect a child has
swallowed or inserted a button battery
immediately seek medical advice. If the battery
compartment does not close securely, stop
using the product and keep it away from
children.
CAUTION:
Risk of explosion if battery is replaced by an
incorrect type. Dispose of used batteries
according to the instructions.

Liquid Ears™
PO Box 5658 Brendale QLD Australia 4500
Customer Support 1800 812 261
www.liquidears.com
DESIGNED IN AUSTRALIA