Little Seeds 2364015COM User manual

B342364015COM0
Date of Purchase ___ / ___ / ___
Lot Number:

2
2364015COM
Nightstand
Keep this Assembly Manual for future reference.
Two adults
recommended
for assembly
Las traducciones en español se encuentran al final
de este manual.
Vous trouverez les traductions en français à la fin
de ce manuel.
Secure Your Furniture
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.
This product is not intended for commercial use.
Follow little seeds on
Do NOT return this product.
For missing or broken parts
- Visit littleseedskids.com
- Call 1-800-489-3351

3
littleseedskids.com
Tube
You
Assembly Tips
Contact our friendly customer service team first for help.
Do NOT return this product!
Helpful Hints
PEOPLE NEEDED FOR ASSEMBLY: 1-2
- Open your item in the area you plan to keep it for less heavy lifting
- Identify, sort and count the parts before attempting assembly
- Compression dowels are tapped in with a hammer
- Slides are labeled with a R (right) and L (left) for proper placement
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge
- Use all the nails provided for the back panel and spread them out equally
- Back panel must be used to make sure your unit is sturdy
- Do NOT use harsh chemicals or abrasive cleaners on this item
- Never push, pull, or drag your furniture
Visit littleseedskids.com to view the
limited warranty valid in the U.S. and Canada.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST

4
littleseedskids.com
Board Identification
Left Panel
32364015010 Right Panel
32364015020
BC A
Top
32364015030 Bottom
32364015040
D
Back Panel
K236400000
Left Drawer Side
39991167346510L
Drawer Front
32364015050
E
Drawer Bottom
39991340041210D
Drawer Back
39991167040117B
DWR
BACK
DWR
BTM
F
Right Drawer Side
39991167346510R
LFT
DRW
SIDE RGT
DRW
SIDE

5
littleseedskids.com
Board Identification
B
D
A
C
F
This piece is paperboard
construction. It is not made
from wood but is required for
the assembly of your unit.
LFT
DRW
SIDE
DWR
BTM
DWR
BACK
RGT
DRW
SIDE
E

6
littleseedskids.com
Parts List
x16
#A14220
1/2" pan head
x10
#A11080
7/16" flat head
x2
#A17400
8-32 x 7/8" bolt
x4
#A21975
drive fastener
x16
#A21110
nail
x4
#A22700
cam lock
x4
#A22710
cam bolt
x4
#A21670
wood dowel
x4
#A23030
confirmat
Actual Size
Please Note: Your model
may contain extra
hardware.
8
9
6
4
351 2
7
10
x2
#A50170
handle

7
littleseedskids.com
Parts List
x4
#A44670
leg
Not Actual Size
x1
#A56770
drawer slide package
left
cabinet
member
right
cabinet
member
left
drawer
runner
right
drawer
runner
12
11
12a 12b 12c 12d

8
littleseedskids.com
Before You Start
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
P
P
P
P
1
34
2
P
Press parts together so CAM BOLT inserts
into edge hole.
Press CAM BOLT into hole. Press CAM LOCK into hole.
Using a screwdriver, turn the CAM LOCK clockwise to
lock the CAM LOCK and CAM BOLT into their holes
and fastening parts together.
Arrow to point towards end
hole in edge of part.
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Parts are labeled on the surface or edge of the part
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.

9
littleseedskids.com
Step 1
(x2)
3
6
Marked with a "L"
(x2) (x3)
(x1)
3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
A
12a
6
6
6
1
1
1
3
12a
finished edge

10
littleseedskids.com
Step 2
3
6
(x2) (x2) (x3)
(x1)
Marked with a "R"
Proper orientation of CAM LOCK
Tip
Assembly
Quick
3
B
12b
6
6
6
1
1
13
12b
finished edge

11
littleseedskids.com
Step 3
(x4)
2
C
2
2
2
2

12
littleseedskids.com
Step 4
A
B
finished edges
UNLOCKLOCK
C

13
littleseedskids.com
Step 5
A
B
4
(x4)
4
4
4
4
finished edge
s
D

14
littleseedskids.com
Step 6
Flush the edge of the back panel with
the bottom edge of the bottom shelf.
Align squarely and nail straight
through into back edges.
Assure that the unit is square.
Distance from corner to corner must
be equal as shown.
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND
MUST BE INSTALLED PROPERLY.
Carefully place unit on its front side.
5
5
F
(x16)

15
littleseedskids.com
Step 7
(x4)
(x16)
11
88
8
11
11
11
11
D
Carefully place unit on its top.
8

16
littleseedskids.com
Step 8
LFT
DRW
SIDE
E
RGT
DRW
SIDE
Side View
90°
Drawer Side
Drawer Front
Insert the "claws" at the end of drawer
sides into the holes of drawer front and
while keeping slight downward pressure,
swing out until drawer side is straight up.
NOTE: The drawer sides will be slightly
unstable until the drawer bottom is
installed (step 9).

17
littleseedskids.com
Step 9
finished surface
LFT
DRW
SIDE
DWR
BTM
RGT
DRW
SIDE

18
littleseedskids.com
Step 10
LFT
DRW
SIDE
DWR
BACK
RGT
DRW
SIDE
(x4)
9
9
9
9
9

19
littleseedskids.com
Step 11
Attach the slides first and then the handles.
12c 12d
6
710
12c
12d
10
6
6
6
6
7
7
(x4) (x2)
(x1)
(x2)
LFT
DRW
SIDE
E
RGT
DRW
SIDE

20
littleseedskids.com
Step 12
corredera de mueble
cabinet member
rodillo
roller
drawer runner
deslizador de cajón
roller
rodillo
coulisse du cabinet rouleau
coulisse du tiroir
rouleau