Little Tikes Dino Bouncer User manual

4
1
Illustrations are for reference only. Styles may vary from actual contents.
642814
CONTENTS
Dino Bouncerª Dino Bouncerª
AGES 2-6 YEARS
B. 2 Repair Patches
ADULT SUPERVISION REQUIRED
Please keep this manual as it contains important information.
MGA Entertainment UK Ltd
50 Presley Way
Crownhill
Milton Keynes
MK8 0ES
Bucks, UK
0800 521 558
www.littletikes.com
www.littletikes.co.uk
© The Little Tikes Company,
an MGA Entertainment company.
LITTLE TIKES® is a trademark of Little Tikes
in the U.S. and other countries. All logos,
names, characters, likenesses, images,
slogans, and packaging appearance are
the property of Little Tikes.
Little Tikes Consumer Service
2180 Barlow Road Hudson, Ohio 44236
U.S.A.
1-800-321-0183
Printed in China
0716-0-E
Visit our website at
www.littletikes.com
to register your product and
to enter our sweepstakes.
(No purchase necessary)
A.
B.
The Little Tikes Company makes fun, high quality toys.We warrant to the original purchaser that this product
is free of defects in materials or workmanship for 90 days from the date of purchase (dated sales receipt is
required for proof of purchase). At the sole election of The Little Tikes Company, the only remedies available
under this warranty will be either replacement of the defective part or replacement of the product.This
warranty is valid only if the product has been assembled and maintained per the instructions.This warranty
does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other
cause not arising from defects in material and workmanship. U.S.A. and Canada: For warranty service or
replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to:
Consumer Service,The Little Tikes Company, 2180 Barlow Road, Hudson OH 44236, U.S.A. Some replacement
parts may be available for purchase after warranty expires - contact us for detail. Outside U.S.A. and Canada:
Contact place of purchase for warranty service.
Indoor Bouncers Warranty: We warrant to the original purchaser that the material in this product is free of
defects in materials or workmanship for 90 days from the date of purchase, (dated sales receipt is required
for proof of purchase). This warranty gives you specific legal rights, and you may also have other rights,
which vary from state/country to state/country. Some states/countries do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
*The warranty period is three months for daycare or commercial purchasers.
LIMITED WARRANTY
QUICK START
1. Clear an indoor area (see diagrams below) and place the folded Dino Bouncer™ inside the area.
2. Fully unfold the Dino Bouncer™ with the control panel near a 120 volt AC wall electrical outlet.
SETTING UP THE BOUNCER
An adult must set up and inflate the unit. Here’s how:
MINIMUM CLEARANCE ZONES
Make sure that there is a 2 m (6.6 ft.) obstacle-free zone
around the product.
2 m (6.6 ft.)
2 m (6.6 ft.)
2 m (6.6 ft.)
2 m (6.6 ft.)
2 m
(6.6 ft.)
2 m
(6.6 ft.)
‘Let’s care for the environment!’
The wheelie bin symbol indicates that the product must not be disposed of with other household
waste. Please use designated collection points or recycling facilities when disposing of the item.
Do not treat old batteries as household waste. Take them to a designated recycling facility.
· To reduce the risk of electric shock, use indoors only.
· Remove the bouncer plug from the electrical outlet before cleaning.
· Allow the unit to cool down for 3 minutes after 5 minutes of continuous pump operation.
· The pump containts a thermal switch that will automatically shut down the unit if it gets too hot. To reset,
turn the pump switch to OFF and unplug the unit from the AC outlet to allow it to cool. The pump will
function properly once normal temperatures are reached.
WARNING:
· Do not use the electric pump near wet surfaces or if water has entered the pump.
· Do not immerse the bouncer pump in water or cleaning liquid.
· Always keep the power cord away from hot surfaces. If the power cord or plug is damaged, contact
consumer service.
· This appliance has a polarized plug (one blade is wider than the other). This plug will t in a polarized
outlet only one way. If the plug does not t fully in the outlet, reverse the plug. Do not change the plug in
any way.
· Do not place the power cord under the bed, funiture or carpet coverings.
IMPORTANT PUMP INFORMATION
A. 1 Dino Bouncer™
The pump is not serviceable. Do not attempt to service the pump.
Doing so may cause the warranty to be voided.
· SERVICING OF A DOUBLE-INSULATED PRODUCT:
In a double-insulated product, two systems of insulation are provided instead of grounding. No
grounding means is provided on a double-insulated product, nor should a means for grounding be
added to the product. Servicing of a double-insulated product requires extreme care and knowledge of
the system, and should be done only by qualified service personnel. Replacement parts for a
double-insulated product must be identical to those parts in the product. A double-insulated product is
marked with the words "DOUBLE INSULATION" or "DOUBLE INSULATED.“ The symbol may also be
marked on the product. DOUBLE
INSULATION

23
Fig. 4
DEFLATING THE BOUNCER
9. Open the large air outlet near the control panel. (Fig. 4)
10. Turn the knob on the control panel to DEFLATE and the ON/OFF switch to ON.
11. Once deated, turn the ON/OFF switch to OFF (O), unplug the unit and store the cord inside the
control panel door. (Fig. 5)
Fig. 5
ADULT SUPERVISION AND SET UP REQUIRED. This product should be inated or deated by a competent adult.
1. Not for outdoor use. Sudden gusts of wind can lift the product o of the ground.
2. Minimum clearance zones of 6.6 ft. (2 m) in any direction are required.
3. Keep the area around the product clean and clear of objects to prevent slips and falls.
4. DO NOT allow attachment of items such as jump ropes, pet leashes, cables, etc., to product as they may
cause a strangulation hazard.
5. DO NOT drag the unit as doing so may cause irreparable damage.
6. Ensure the play area is free from hazards such as furniture, walls, sharp objects and other hard surfaces
before inating the unit and playing in it.
7. DO NOT leave children unattended at any time.
8. DO NOT use the unit if it is wet as it may become slippery.
9. DO NOT allow children to play in the product until it is fully inated.
10. Children must remove helmets, loose clothing, scarves, headgear, shoes and glasses, as well as any sharp
objects from their pockets, as they may puncture the bouncing surface.
11. Toys and other objects should never be allowed inside the bouncer.
12. Keep pets away from the product.
13. Children should bounce away from others and stay away from openings and side walls.
14. DO NOT allow food, drink or gum inside unit.
15. Maximum user weight is 60 lbs. (27 kg). Total weight of children must not exceed 120 lbs. (54 kg).
16. No more than 2 children should play on the bouncer at the same time.
17. DO NOT use extension cords with this product.
18. THIS IS NOT A FLOTATION DEVICE. DO NOT USE IN OR NEAR WATER.
19. DO NOT allow children to play together who are unevenly matched in weight and height.
20. Prior to deating, remove all children.
21. Always deate product after use, and store indoors.
22. Users must be discouraged from attempting any unauthorized modication.
23. Remove the plug from the socket before use.
WARNING:
The product should be periodically examined for potentially unsafe conditions such as: damaged cord, plug,
housing, etc. In the event such damage is found, the product should not be used until properly repaired.
Refer to the instructions for set-up, storage, maintenance and care. To clean use mild detergent and water.
MAINTENANCE
4. With the ON/OFF switch in the OFF (O) position, and the INFLATE/RESET/DEFLATE knob in the RESET position,
open the cord storage area door and carefully extend the cord. (Fig. 2)
5. Plug the cord into the wall outlet.
6. Turn the ON/OFF switch to ON (I) and rotate the INFLATE/DEFLATE knob to INFLATE. (Fig. 2)
7. Allow the Bouncer to inflate until it is firm but the seams still show slight wrinkling then turn the knob to
RESET and turn the ON/OFF switch to OFF (O). (DO NOT over-inflate.)
NOTE:The knob must be completely centered at RESET to prevent deflation. (Fig. 2A)
8. Place the power cord in the control panel cord storage door prior to allowing children to play on the unit.
In the event the bouncer is accidentally punctured, an adult must perform the following steps:
1. Deflate the item, clean the punctured area with water and allow it to dry.
2. Cut a portion of the patch allowing approximately 11/2inches of excess patch material on all sides of the
opening to be patched and round the corners.
3. Remove the backing from the patch material, position the patch over the damaged area and smooth out
any bubbles with a paper towel.
4. Allow the item to sit for 30 minutes before re-inflating.
REPAIRING A PUNCTURE
Fig. 2
INFLATING THE BOUNCER
OPEN
FOR
CORD
STORAGE
DEFLATE
INFLATE
RESET
A small pressure release opening (Fig. 3A) is incorporated behind the dinosaur’s head (Fig. 3). This opening
is not connected to the main ination chamber and poses no risk of deation. Do not use the included
repair patches to cover this opening, as it is important for maintaining balance in the dinosaur head.
Fig. 3 Fig. 3A
Fig. 2A
ON (I)/OFF (O)
3. Check that the buckles on the slide are properly adjusted.If necessary, twist the connector to tighten. (Fig 1)
ADJUST
BUCKLE
ADJUST
BUCKLE
TWIST TO TIGHTEN
Fig. 1