bloom fresco User manual

www.bloombaby.com
user guide
contemporary
baby chair
chaise haute fresco / silla fresco /
kindersitz fresco / seggiolone fresco /
moderne kinderstoel

a
c
d
b
Part List & Illustrations
Liste des pièces & Illustrations
Lista de piezas e Ilustraciones
Mitgeliefertes Zubehör & Abbildungen
Elenco delle parti & Illustrazioni
Onderdelenlijst & Illustraties
Basic Assembly
Montage
Armado Básico
Grundaufbau
Assemblamento Della Base
Basis Installatie
Cradle Mode: suitable for 0 – 6 months
Configuration Berceau (allongée): de 0 à 6 mois
Modo de Cuna: apropiado de 0 a 6 meses
Wiegenstellung: geeignet für 0 – 6 monate
Modalità Culla: usufruibile da 0 a 6 mesi
Baby Modus van 0 tot 6 Maanden
Highchair Mode: suitable for 6 months to 36 months
Configuration Chaise Haute: de 6 mois à 36 mois
Modo de Silla Alta: para 6 meses a 36 meses
Hochstuhlstellung: geeignet für 6 – 36 monate
Modalità Seggiolone: sfruttabile da 6 a 36 mesi
Baby-peuterstoel Modus van 6 tot Maanden
Toddler Chair Mode: suitable for 36 months to 36 kg/79 lbs
Configuration Chaise Enfant: de 36 mois à 5 ans (maximum
36 kg/79 lbs)
Modo de Silla Para Niño: para niños de 36 meses a
36 kg/79 lbs
Kleinkindstellung: geeignet für 36 monate bis 36 kg/79 Pfund
Modalità Sedia per Bambino: sfruttabile da 36 mesi a
36 kg/79 lbs
Kinderstoel Modus van 36 Maanden tot
36 kg/79 lbs
i1
i2-i3
i4-i6
i7-i10
i11-i12
illustration contents

#01
#02
#03
#05
#06
#07
#08 #09
#10
#11
#12
#13
#04
illustrations
part list
i 1

i 2
– Basic Assembly
– Montage
– Armado Básico
– Grundaufbau
– Assemblamento Della Base
– Basis Installatie
a

1
2
A B
#10
#01
#02
a
basic assembly
a 1
a 3
a 2
a 4
i 3

i 4
– Cradle Mode: suitable for 0 – 6 months
– Configuration Berceau (allongée): de 0 à 6
mois
– Modo de Cuna: apropiado de 0 a 6 meses
– Wiegenstellung: geeignet für 0 – 6 monate
– Modalità Culla: usufruibile da 0 a 6 mesi
– Baby Modus van 0 tot 6 Maanden
b

1
2
#10
#05
#09 #06
#12 #13
b
cradle mode: 0 – 6 months
b 1
b 3
b 2
b 4
i 5

A, B
b 5
i 6

c
i 7
– Highchair Mode: suitable for
6 months to 36 months
– Configuration Chaise Haute: de 6 mois à 36
mois
– Modo de Silla Alta: para
6 meses a 36 meses
– Hochstuhlstellung: geeignet für 6 – 36
monate
– Modalità Seggiolone: sfruttabile da 6 a 36
mesi
– Baby-peuterstoel Modus van 6 tot 36
Maanden

1
2
3
#10
#07
#10
#09
#05
#11
c
highchair mode: 6 – 36 months
c 1
c 3
c 2
c 4
i 8

A, B
#03
#04
c 5
c 7
c 6
c 8
i 9

i 10
i
c 9 c 10

– Toddler Chair Mode: suitable for 36 months
to 36 kg/79 lbs
– Configuration Chaise Enfant: de 36 mois à
5 ans (maximum 36 kg/79 lbs)
– Modo de Silla Para Niño: para niños de 36
meses a 36 kg/79 lbs
– Kleinkindstellung: geeignet für 36 monate
bis 36 kg/79 Pfund
– Modalità Sedia per Bambino: sfruttabile da
36 mesi a 36 kg/79 lbs
– Kinderstoel Modus van 36 Maanden tot
36 kg/79 lbs
d
i 11

2
i 12
A, B
#10
#12 #13
d 1
d
toddler chair mode: 36 months – 36 kg /79 lbs
d 3

Instructions – eng
Instructions – fr
Instrucciones – es
Gebrauchsanweisung – de
Istruzioni – it
Instructies – ned
1-9
10-18
19-27
28-37
38-47
48-56
contents

1
eng
dear customer,
thank you for choosing the fresco/ fresco loft baby chair. fresco/ fresco
loft is the award winning baby chair which can be used much earlier
than a standard highchair because of its reclining seat.
bloom’s european design team created the contemporary fresco/ fresco
loft to provide families with a feeding and resting chair for baby that
reflects today’s concepts of living and dining space.
engineered to integrate advanced functionality, such as 360 degree
rotation and exclusive easy-lift effortless height adjustment, the fresco/
fresco loft revolutionizes baby chair design.
Age Recommendation
IIt is recommended that your child be between
newborn and 36 kg/79 lbs (5 – 8 years) to use
this baby chair.
IMPORTANT!
KEEP THIS INSTRUCTION
GUIDE FOR FUTURE
REFERENCE

2
eng
Product Information
This baby chair has been designed and tested to
ensure compliance with the latest relevant safety
standards.
• This baby chair is designed with multiple
configurations of use for babies and toddlers
from newborn to 36 kg/79 lbs:
– cradle mode: from 0 to 6 months
– highchair mode: from 6 to 36 months
– toddler chair mode: from 36 months to
36 kg/79 lbs
• Easily configures to cradle, highchair and
toddler chair mode
• 360-degree swivel for easy access
• Pneumatic-assist easy-lift height adjustment
allowing infinite positions
• Multiple-position reclining seat
• 5-point safety harness
• Seat upholstery available in vibrant micro-
suede™ colours and elegant, understated
tones of leatherette
• super sized adjustable feeding tray and
second play tray – made of FDA compliant
food contact grade plastic and stainless steel,
removable and dishwasher-safe
• Smooth sliding adjustable multiple-position
food tray
• Multiple-position and removable footrest
• Castor wheels on base for easy ‘lift and glide’
• Compartment for storage of small accessories
Model No.: E10501/ E10505
PATENT PENDING
Colour & contents may vary
Instructions for Safe Use – Please read
carefully and keep for future reference
The correct use and maintenance of your baby
chair will ensure it gives long and trouble-free use.
When somebody else is using your baby chair
please ensure they also know how to use it, how to
adjust it and the necessary safety precautions. The
safety of your child is your responsibility.
NOTE: Adult assembly required.
Section A: Basic Assembly (refer to
illustrations section a)
a1 Base and Seat Assembly
(parts #01, #02) Insert the swivel shaft firmly
into base, until the plastic housings meet. Press
down firmly and turn to secure. Press button to
raise swivel shaft.
(part #10) Insert the seat unit onto swivel shaft
and tighten fastener clockwise. Check seat unit
is secured by pulling seat unit upwards.
a2 Swivel/Height Resistor
IMPORTANT!
The resistor is designed to prevent inadvertent or
free spinning, however with adult force it is still
possible to rotate the seat unit.
To engage
Press metal lever inwards, until it sits flush with
the plastic housing. Check the device is engaged
by turning the seat unit.

3
eng
To disengage
Pull the metal lever outwards fully. Check the
device is disengaged by turning the seat unit.
a3 Swivel and Height Adjustment
To rotate the seat unit, disengage the swivel/
height resistor, then turn the seat unit sideways
to desired position.
To adjust seat height, disengage the
swivel/height resistor. Lift both A & B trigger
simultaneously, whilst pushing downwards or
pulling upwards to desired height, then release
the triggers.
IMPORTANT!
Ensure the seat unit is firmly inserted onto the
swivel shaft before use. Check the seat unit
is assembled properly by trying the height
adjustment function, following the instructions
in this user guide. If the height adjustment fails
to work, this means the seat unit is not properly
assembled, please re-try and press seat unit
downwards on the swivel shaft firmly in order
to properly engage the height adjustment
mechanisms.
a4 Lift & Glide – Easy Glide Wheels
To move the baby chair across floor, first rotate
the seat unit so it is front facing, then engage
swivel resistor. Tilt the baby chair forward by
lifting on the handle located on the rear of the
seat unit, and then glide the highchair across
floor using the castor wheels, which are located
under the front end of the base.
WARNING:
• Continue to assemble the baby chair
according to the configuration suitable for your
child. Follow the corresponding instructions
carefully.
• A child’s safety is your responsibility.
Section B: Cradle Mode
– suitable for 0 – 6 months (refer to
illustrations section b)
WARNINGS:
• Not recommended for children who can sit
up by themselves (6 months approximately).
• Never leave the child unattended when the
baby chair is in cradle mode.
• It is dangerous to put this cradle on an
elevated or uneven surface.
• Keep the product away from open fire,
heaters and other sources of strong heat.
• Do not use the product unless all
components are correctly fitted and
adjusted.
b1 -b3 Seat pad & Safety Harness Assembly
– (parts #05, #06) Put shoulder straps through
the seat pad slits at the lower height setting.
– Put waist straps through the seat pad slits.
– Place seat pad onto the seat unit; secure onto
velcro.
– (part #10) Behind the seat pad, slide the
buckle on the end of the shoulder straps into
the buckle slots located on the inner face of
seat unit. Check the straps are secured by
pulling on the straps.

4
eng
tongues have been fully pushed in. You will hear
an audible click.
Unlocking the Safety Harness:
Squeeze the ends of the tongues together and
then slide them out of the buckle.
NOTE: Every time you place your child in the
baby chair or whenever you alter the position
of the seat always check that the harness is
correctly fitted. Tighten the harness until it fits
snugly around your child.
b5 Seat Unit Height And Seat Unit Recline
To adjust seat height, disengage the
swivel/height resistor. Lift both A & B trigger
simultaneously, whilst pushing downwards or
pulling upwards to desired height, then release
the triggers.
Adjust the seat unit to cradle position by
pressing the handle on the rear of the seat unit,
then recline the seat to the lowest position, and
release the handle. You will hear an audible
click. Check the seat unit is locked in position by
moving it. Ensure the seat unit is reclined to the
lowest cradle position for children from newborn
to approximately 6 months of age, until child can
sit up unaided.
WARNING:
• Children who can not sit up unaided can
only use the cradle mode of this baby
chair. Seat unit must be rotated to the most
reclined position.
– (part #09) Behind the seat pad, pull open
storage compartment door located on the
inner face of seat unit. Slide the buckle on the
end of the waist straps into the buckle slots
on either side of the storage compartment.
Check the straps are secured by pulling on
the straps.
– (parts #12, #13) From storage compartment,
take out the two ‘C’ shaped clips and the
crotch strap cover. Close the compartment
door.
– Snap the ‘C’ shaped clips on either side of the
seat unit; you will hear an audible click.
– Place buckle on the end of the crotch strap
under the crotch strap cover, then slide the
crotch strap cover into the seat unit. (The
strap and buckle must not be twisted or
inverted. This will ensure correct locking of
the harness.)
– Adjust the length of the harness straps until it
fits firmly around your child.
WARNING: Always use the safety harness.
To remove the seat pad & safety harness for
cleaning, follow the instructions given in the care
& maintenance section of this user guide.
b4 Using and Adjusting the Safety Harness
Locking the safety harness:
Lock the harness by pushing the tongues on
the ends of the waist straps, connected with the
ends of the shoulder straps, into the buckle on
the crotch strap.
The harness will automatically lock when the

5
eng
• Always be sure your child is clear of moving
parts before making any adjustments.
Section C: Highchair mode
– suitable for 6 months to 36 months
(refer to illustrations section c)
WARNINGS:
• WARNING: A CHILD’S SAFETY IS YOUR
RESPONSIBILITY.
• DO NOT LEAVE YOUR CHILD UNATTENDED.
• DO NOT USE THE HIGHCHAIR UNTIL THE
CHILD CAN SIT UP UNAIDED.
• DO NOT USE PRODUCT IF ANY PART IS
BROKEN, TORN OR MISSING.
• WARNING: Keep the highchair away from
open fire, heaters and other sources of
strong heat.
• WARNING: Do not use the highchair unless
all components are correctly fitted and
adjusted.
• Always use the safety harness.
• Make sure harness is correctly fitted before
use.
• Always be sure your child is clear of the
highchair’s moving parts before making
adjustments.
• Check the highchair regularly for damage
and to ensure that the harness is secure
and performs correctly. No lubrication is
necessary.
• Always check the tray is securely locked
in place by attempting to pull it free of the
highchair.
• IMPORTANT: Every time you place your
child in the highchair or whenever you alter
the position of the seat, always check that
the harness is correctly fitted. Tighten the
harness until it fits snugly around your child.
c1 Footrest Assembly and Footrest Adjustment
– (part #07) Slide in footrest until you hear an
audible click. Check footrest is secured by
pulling it downwards.
– To remove footrest, press button located on
the end of the footrest attached to the seat
unit, whilst sliding the footrest out toward the
back of seat unit.
– The footrest has three height positions. Press
the button on the back of the footrest, whilst
sliding footrest up or down to your desired
position. The footrest is locked into position
when you hear an audible click. Check
footrest is secured by pulling it downwards.
c2 - c4 Safety Bar, Seat Pad & Safety Harness
Assembly
– (parts #05, #06) Put shoulder straps through
the seat pad slits at the desired height setting.
– Put waist straps through the seat pad side slits.
– Place seat pad onto the seat unit; secure onto
velcro.
– (part #10) Behind the seat pad, slide the
buckle on the end of the shoulder straps into
the buckle slots located on the inner face of
seat unit. Check the straps are secured by
pulling on the straps.
– (part #09) Behind the seat pad, pull open the
storage compartment door located on the