Little Tikes CAPE COTTAGE PLAYHOUSE 637902M User manual

ASSEMBLY INSTRUCTIONS
Cape Cottage Playhouse™
1
Adult assembly required. Approx. assembly time: 20 min.
2+
years
# 653612
# 653568
# 653889
# 654053
XIM653568-R2 - 9/22

2
WARNINGS!
• Adult Assembly Required
• Keep these instructions for future reference.
• Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain
sharp edges and sharp points. Keep away from children until assembled.
• This product is intended for use by children ages 2 years and up.
• This product is intended for outdoor domestic family use only.
• Observing the following statements and warnings reduces the likelihood of serious or fatal injury.
• Place this product on level ground, at least 6.5’ (2 m) away from any object. Objects to be avoided include,
but are not limited to, fences, buildings, garages, houses, overhead branches, laundry lines or electrical wires.
• It is recommended that the orientation of the assembled product be such that direct sunlight is minimized
on surfaces intended for standing or sitting.
• Instruct children on proper use of this product, only after properly placed, and not in a manner other than
intended.
• Instruct children not to attach items to the product that are not specically designed for use with the
product such as, but not limited to, jump ropes, clotheslines, pet leashes, cables and chains, as they may
cause a strangulation hazard.
MAINTENANCE
• Check all hardware twice monthly during the usage period and tighten as required. It is particularly
important that this procedure be followed at. the beginning of each season. If these checks are not carried
out, the toy could overturn or otherwise become a hazard. Replace if they are loose, cracked, or missing.
• Take this product indoors or do not use outdoors when temperatures fall below 0°F (-18°C).
DISPOSAL
Disassemble and dispose of equipment in such a manner that no hazardous conditions such as, but not
limited to, small parts and sharp edges exist at the time equipment is discarded.
Thank you for choosing the Little Tikes©Cape Cottage Playhouse™.
We strive to provide a durable, easy-to-assemble toy thats made to last,
giving your child years of imaginative, engaging fun!
• Read through all the instructions rst.
• Clear a at surface to lay out all the materials so everything is close at hand.
• You will need a Phillips head screwdriver to assemble the Cape Cottage Playhouse™.
- When installing screws, be sure screws are tightened snugly, but do NOT OVERTIGHTEN.
• The parts are listed - each part is identied with a letter in RED for easy reference.
• Illustrations are for reference only. Styles may vary from actual contents.
• If you have any questions, we’re here to help. Give our customer service team a
call at 1-800- 321-0183.
Really important information you should know!

A Few Things Before You Start!
BEFORE you begin assembly, make sure
you have all the parts listed below.
Some packages of hardware may have extras pieces.
!
Questions? We’re here to help.
Little Tikes customer service team at 1-800- 321-0183.
!
Tools required
(not included)
Plastic screw - A (24)
(12) 3/4" (1.9cm) Plastic screw tool (1)
(included)
Flag holder (2)
Shown actual size
3
Wall Top (2)
A
Wall Bottom (2)
B
Roof (2)
C
Side wall (2)
D
Door (1)
E
Window (4)
F
Shelf (1)
I
Roof Locks (16) Plastic roof screw - B (4)
Plastic
fastener (8)
Spacer (2)
GH

4
For Ease of Assembly: apply 1 tbsp.
of liquid soap to surfaces of Wall Top
(part A).
1a
Let’s go, connect the walls!
A
A
B
Connect Wall Top (part A) to
Wall Bottom (part B).
TABS located on Wall Top (A)
MUST be positioned inside of
Wall Bottom (B) once assembled.
Repeat steps for second wall
1b

5
2
Secure the walls!
x4
¾" (1.9cm)
x2
Next, insert (2) ¾" (1.9 cm) screws
First secure using (4) Plastic Screws A.
1 2
Plastic screw toolPlastic screw A
3

6
Secure the walls...cont!
x1
For ease of
assembly:
use plastic
screw tool
to press pin
into place.
Plastic
Fastener
Plastic Screw Tool
4
5
Spacer
+
x3
For ease of
assembly:
use plastic
screw tool
to press pin
into place.
Plastic
Fastener
Plastic Screw Tool
Break o a plastic fastener and spacer from ring. Place spacer onto the fastener and
insert it into the hole located on the raised brick as shown.
Break o a plastic fastener (x3) (spacer is NOT NEEDED). Insert the fastener (x3) in locations shown.

7
Wall 1 - attach the door!
Slide the top corner of the door (part E) into the hole
in the door frame, then hook in the bottom to secure.
Slide one side of the shelf (part G) into the hole
in the door frame, then hook in the other side to secure.
6a
E
1
2
Wall 2 - attach the shelf!
6b
Walls are identical.
Door and shelf can
be installed into
either wall.

8
Install (4) /" screws (2 on each side) to
secure the shelf to wall interior.
Ready for the SIDE walls!
Attach a side wall (part D) and secure using (4)
Plastic Screws - A.
7
D
Plastic screw - A
x4
1 2
Wall 2 - attach the shelf!...cont.
6b
¾" (1.9cm)
x4
x2

9
Ready for the SIDE walls...cont.
8
Attach the second side wall (part D) and secure
using (4) Plastic Screws - A.
Plastic screw - A
x4
Attach the remaining wall and
secure using (8) Plastic Screws - A.
Plastic screw - A
x8
D
9
1 2
1 2

10
Install the flag holder
10
Attach the ag holder and secure using
(2) 3/4" (1.9cm) screws.
¾" (1.9cm)
x2
The playhouse needs a roof!
11
Place one side of the roof (part C)
on to the top of the walls.
C
Slide the other side of the roof onto
the playhouse.
G
At the center of the roof, t half of the roof peak
UNDER and the other half should t OVER the
existing roof peak. Make sure the roof notches
hooked into the slots.
x2