Little Tikes 656057M User manual

ASSEMBLY INSTRUCTIONS
2-in-1 Indoor-Outdoor Slide
XIM656057 - 12/20
1
Adult assembly required. Approx. assembly time: 20min.
Look for video of assembly at
littletikes.com/videoinstructions
#656057M
#656057MX1
11
/2-6
years

2
WARNINGS!
• Adult Assembly Required
• Keep these instructions for future reference.
• Prior to assembly, this package contains small parts: hardware which is a choking hazard and may contain
sharp edges and sharp points. Keep away from children until assembled.
• To prevent serious injury, children must not use the equipment until properly installed.
• Falls onto hard surfaces can result in head or other serious injuries. Never place on concrete, asphalt, wood,
packed earth, grass or other hard surfaces. Carpet over hard oors may not prevent injury. Always use protective
surfacing on the ground under and surrounding the playground equipment according to the enclosed
“Consumer Information Sheet for Playground Surfacing Materials.” Maximum fall height protection up to 2 feet
(0.6 m) required.
• Adult supervision required. Do not leave children unattended.
• This product is intended for use by children ages 1 1/2 - 6 years.
• Maximum weight per child: 60 lbs. (27.2 kg). Limit 1 child.
• Shoes must be worn at all times.
• This product is intended for indoor/outdoor domestic family use only.
• Observing the following statements and warnings reduces the likelihood of serious or fatal injury.
• Place this product on level ground and at least 6’6” (2 m) away from any object. Objects to be avoided
include, but are not limited to, fences, buildings, overhead branches, laundry lines or electrical wires.
• It is recommended that the orientation of the assembled product be such that direct sunlight is minimized
on surfaces intended for standing or sitting.
• Instruct children on proper use of this product, only after properly placed, and not in a manner other than
intended.
Thank you for choosing the Little Tikes©2-in-1 Indoor-Outdoor Slide.
We strive to provide a durable, easy-to-assemble toy thats made to last,
giving your child years of imaginative, engaging fun!
• Read through all the instructions rst.
• Clear a at surface to lay out all the materials so everything is close at hand.
• You will need a Phillips head screwdriver (not included) to assemble the
2-in-1 Indoor-Outdoor Slide.
- When installing screws, be sure screws are tightened snugly, but do NOT OVERTIGHTEN.
• The parts are listed below - each part is identied with a letter in RED for easy reference.
• Illustrations are for reference only. Styles may vary from actual contents.
• If you have any questions, we’re here to help. Give our customer service team a
call at 1-800- 321-0183.
Really important information you should know!

3
LIMITED WARRANTY
The LittleTikes Company makes fun, high quality toys.We warrant to the original purchaser that this product is free of defects in materials or workmanship for one year * from the date of purchase (dated sales receipt is
required for proof of purchase). At the sole election ofThe LittleTikes Company, the only remedies available under this warranty will be the replacement of the defective part or replacement of the product.This warranty is
valid only if the product has been assembled and maintained per the instructions.This warranty does not cover abuse, accident, cosmetic issues such as fading or scratches from normal wear, or any other cause not arising
from defects in material and workmanship. *The warranty period is three (3) months for daycare or commercial purchasers.
U.S.A and Canada: For warranty service or replacement part information, please visit our website at www.littletikes.com, call 1-800-321-0183 or write to: Consumer Service,The LittleTikes Company, 2180 Barlow Road,
Hudson OH 44236, U.S.A. Some replacement parts may be available for purchase after warranty expires—contact us for details.
Outside U.S.A and Canada: Contact place of purchase for warranty service.This warranty gives you specic legal rights, and you may also have other rights, which vary from country/state to country/state. Some countries/
states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
©The LittleTikes Company, an MGA Entertainment company. LITTLETIKES® is a trademark of Little Tikes in the U.S. and other countries. All logos, names, characters, likenesses, images, slogans, and packaging appear-
ance are the property of Little Tikes. Please keep this address and packaging for reference since it contains important information. Contents, including specications and colors, may vary from photos depicted on package.
Instructions included. Please remove all packaging including tags, ties & tacking stitches before giving this product to a child.
United States:
www.littletikes.com
1-800-321-0183 Monday - Friday
The LittleTikes Company
2180 Barlow Road
Hudson, OH 44236
E-mail: [email protected]
Printed in U.S.A. D.R.©2020 The Little Tikes Company
United Kingdom:
www.littletikes.co.uk
LittleTikes, MGA Entertainment (UK) Ltd
50 PresleyWay
Crownhill
Milton Keynes MK8 0ES
Bucks, UK
Tel: [phone]
E-mail: [e-mail]
Australia
www.littletikes.com.au
Imported by MGA Entertainment Australia Pty Ltd
Suite 2.02, 32 Delhi Road
Macquarie Park NSW 2113
1 300 059 676
CONSUMER SERVICE:
MINIMUM SIZE allowed is .2” high
Updated 12.2.11 per Paul Madan (new spacing)
• Instruct children not to attach items to the product that are not specically designed for use with the
product such as, but not limited to, jump ropes, clotheslines, pet leashes, cables and chains, as they may
cause a strangulation hazard.
• Instruct children to remove their bike or other sports helmet before playing on this product.
• Dress children appropriately: do not allow children to wear loose-tting clothing including ponchos, scarves
and garments with drawstrings. Well-tting shoes must be worn at all times.
• Do not store or leave water in product when not in use.
• Warning. Only for domestic use.
MAINTENANCE
WARNINGS!
Failure to perform periodic checks could cause this product to overturn or cause a fall.
The following checks should be performed at the beginning and end of each season and twice monthly
during the usage period:
• Reinstall any plastic parts, such as swing seats or any other items that were removed for the cold season.
• Tighten all hardware.
• Lubricate all metallic moving parts at the beginning of the play season and twice per month during the
play season.
• Check all protective coverings on bolts, pipes, edges, and corners. Replace if they are loose, cracked, or
missing.
• Check all moving parts including swing seats, ropes, cables, and chains for wear, rust, or other
deterioration. Replace if any of these conditions exist.
• Check metal parts for rust. If found, sand and repaint using a nonlead-based paint meeting the
requirements of 16 CFR 1303.
• Rake and check depth of loose ll protective surfacing materials to prevent compaction and to maintain
appropriate depth. Replace as necessary.
• Take this product indoors or do not use when temperatures fall below 0°F/-18°C.
DISPOSAL
• Disassemble and dispose of equipment in such a manner that no hazardous conditions such as, but not
limited to, small parts and sharp edges exist at the time equipment is discarded.

Slide (1)
A
Steps (1)
B
4
(10) 1/2" (1.27 cm)
Handles (2)
C
Slide base (1)
D
A Few Things Before You Start!
BEFORE you begin assembly, make sure
you have all the parts listed below.
Some packages of hardware may have extras pieces.
!
Questions? We’re here to help.
Little Tikes customer service team at 1-800-321-0183.
!
Sprinkler hose (1)
E
Tool required (not included)
Illustrations are for reference only.
Styles may vary from actual contents.
Shown Actual SIze

5
1
Ready...let’s get started!
Turn the slide (part A) over to access the underside. Place the
CENTER of the hose assembly (part E) onto the screw bosses.
Secure the hose assembly using (2) 1/2“ (1.27 cm) screws.
A
E
(2) 1/2" (1.27 cm)
Install center hose
attachment rst!

2
Sprinkler, sprinkler
6
Place a screw into the
sprinkler jet hole before
placing the sprinkler jet into
the slide.
5
Secure EACH
sprinkler jet
using (2) 1/2“
(1.27 cm) screws.
(2) 1/2" (1.27 cm)
Sprinkler jet
ts into slot
FIT each sprinkler jet into the coordinating
slot opening, aligning the screw holes to the
screw bosses.
Turn slide over to
check, sprinkler jets
should be ush with
the slide.

7
4
Front FIRST!
Locate the 3 tabs on the front of the slide base (part D).
Insert them into the 3 slots at the front of the slide.
D
4
Swing it back to click!
Rotate the slide base back until it clicks in place.
3
Tabs
Slots
Click!

8
5
Step it up
While the slide is still turned over, insert the steps (part B) into slide.
B

9
6
Know your FRONT and BACK!
Front of
handle
Back of
handle
Insert the FRONT of the handle into
the FRONT of the notched area at the
top of the slide.
Fit the BACK of the handle into the
back of the notched area.

10
Pull UP on the BACK of the handle to be sure it will
not pop o. If it does pull o, then you need to
press down on the back again until you feel it snap
into place - 2 SNAPS!
7
2 SNAPS!
Push down on the BACK of the handle.
You MUST feel the handle SNAP 2 times!
Snap!
#1
Snap!
#2
Now REPEAT for the other handle.