Livall P1 NANO Cadence User manual

Thanks for choosing Livall P1 Nano
Cadence. Please read the instructions
carefully before use to ensure safe and
satisfactory operation of this product.
Please retain these instructions for further
reference.
This product adopts the technology of
gravity and the latest Livall cadence
frequency algorithm to provide you with
this compact nano cadence. It features
flexible and convenient installation and is
applicable to most bicycles in the market.
By using the cadence data, you can easily
control the riding.

PCBA

1. Install the product to a crankset
(Ø22-24mm round hole in the middle)
Unscrew
and remove
the upper
cover
Use a
toothpick to
take out the
PCBA
Tuck the silicon
plug into the
crankset hole, and
tighten or loosen
the screw as
required

Put the PCBA
(without
battery) back
to the shell of
P1
Screw the
upper cover
into the tower
shell of the
product
Installation
completed

Remove the
upper shell,
PCBA and
the bottom
shell
Wrap the cable tie
around the inner
side of the right
crank, and tighten
the tie
2. Install the crank
Install these
parts onto
the silicon
cover in
sequence

Use a knife or a pair of tweezers to take out the
plastic mat from the crank hole.
Unscrew and remove the upper cover of the
cadence, and rotate the cadence sensor
clockwise into the threaded hole tightly by an
adjustable wrench. Then, put the upper cover
back.
3. Install M22 thread crankset

Disassemble
the PCBA
Use a toothpick to
remove the
battery
Put a new
CR2032 battery
back into the
PCBA
4. Change the battery

Put a new
CR2032 battery
back into the
PCBA
through the Livall App.
3.Properly store this product and
relevant accessories and place them out
of reach of children.
4.Keep the product away from fire or
other heat sources to avoid danger.
5.Changes or unauthorized repair of the
product could cause the product failing
in normal use and void the warranty.
Visit www.livall.com to download and
install the Livall App. Follow the wizard
for connection.
Precautions
1.Choose a proper installation method
according to the actual conditions of
your bike.
2.This nano cadence is used to
calculate the frequency of pedaling
during riding, and to indicate cadence
frequency and the remaining power
5. Connect to a smart phone:

through the Livall App.
3.Properly store this product and
relevant accessories and place them out
of reach of children.
4.Keep the product away from fire or
other heat sources to avoid danger.
5.Changes or unauthorized repair of the
product could cause the product failing
in normal use and void the warranty.
Visit www.livall.com to download and
install the Livall App. Follow the wizard
for connection.
Precautions
1.Choose a proper installation method
according to the actual conditions of
your bike.
2.This nano cadence is used to
calculate the frequency of pedaling
during riding, and to indicate cadence
frequency and the remaining power