LIVING AND HOME LAUNDRY BASKET User manual

1
LAUNDRY BASKET

2
SAFETY &WARNINGS
Warning

Please read all instructions carefully.

Retain instructions for future reference.
 Separate and count all parts and hardware.
 Read through each step carefully and follow the proper order.
 We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.

Always place the product on a flat, steady and stable surface.
 Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.Parts
of the assembly will be easier with 2 people.
 Do not use this item if any components are missing or damaged.

Dispose of all packaging carefully and responsibly.
Assembly Tips
 Please read the instruction manual carefully to understand the matters
needing attention in the process of installation and maintenance.
 Strictly follow the assembly instructions.
 Carefully check whether the parts in the box are intact.
 Assemble on the box so as not to damage the product and room floor.
 The use of mismatched parts may cause damage to the product. Please
confirm the model of various parts before assembly.

3
COMPONENTS
Side Stand A x 1
Side Stand B x 1
Door Panel x 1
Slatted Board x 3

4
Back Board x 1
Front Bar x 1
Rear Rod (with groove) x 1
Side Rod (slanted) x 2
Bottom Panel x 1
Bottom of Storage Bag x 1
Storage Bag x 1
Large Screw
Small Screw
Metal Cap
Hex Wrench

5
INSTALLATION
Step 1
Take out side stands A,B and rear rod (with groove) and install them with large
screws (note that the grooves of side stand and rod should be aligned).
Step 2
Take out the door panel and bottom panel and install them with small screws .
Step 3
Take out the side rods (slanted) and install them with small screws (note that the
bevel of the rod is different from the upper and lower sides) .

6
Step 4
Take out the metal caps and insert them at the bottom of both ends of the door
panel .
Step 5
Take out the metal caps and insert them in the middle of the side rod (slanted).
Step 6
Check that the metal caps are securely fixed as shown in the picture.

7
Step 7
Then clamp the metal caps into the side stand as shown in the figure .
Step 8
Take out the front bar and install it with large screws .
Step 9
Take out the back panel and insert it along the groove.

8
Step 10
Take out the slatted boards and install them with large screws.
Step 11
Take out storage bag and bottom of storage bag.
Step 12
Put the storage bag in the shelf.

9
CLEANING &CARE
 Only clean using a damp cloth and mild detergent, do not use bleach or
abrasive cleaners.
 Regularly check all fastenings to ensure that they properly tightened.

This product should not be discarded with household waste. Take to your
local authority waste disposal centre.

10
Living and Home
A Home is for Living in
For comfort and style update your living space.
Browse contemporary and classic designs and find the
perfect home to your look and the perfect spot to lounge.
Put your feet up and sink into our stylish home decor.
We are mainly engaged in home, outdoor, home appliances,
office, bathroom, provided high quality and affordable
products for you. We value every one of our customers and
our professional service team is always available to help you.
livingandhome.co.uk