LIVING AND HOME MANICURE TABLE User manual

1
MANICURE TABLE

2
ASSEMBLY INSTRUCTIONS
 Carefully unpack & identify each component before attempting to
assemble, refer to the parts list.
 Please take care when assembling the unit and always set the parts on a
clean, soft surface.
 Check screws, nuts and bolts periodically (or every 6 months). Tighten if
necessary.
WARNING: DO NOT USE POWER TOOLS.
ADDITIONAL TOOL REQUIRED: CAUTION !

3
PART LIST

4
COMPONENTS
A-1: Table Top (x1)
1200*450*21mm
A-2: Side-board (x4)
549*385*15mm
B-1: Door-board (x1)
546*300*15mm
B-2: Bottom-board (x2)
300*400*25mm
A-3: Bottom Drawing (x3)
325*224*3mm
B-3: Top-board (x2)
300*400*15mm
B-4: Layer-board (x2)
368*269*15mm
B-5: Drawing Face (x2)
300*150*15mm
B-6: Pad (x1)
B-7: Fan (x1)
B-8: Drawing Back-board (x2)
215*90*15mm
B-9: Drawing Face (x1)
300*240*15mm

5
B-10: Drawing
Side-board (x2)
330*120*15mm
B-11: Drawing
Side-board (x2)
330*90*15mm
B-12: Drawing
Back-board (x1)
215*120*15mm
B-13: Back-board (x2)
549*270*15mm
(1) : Eccentric Fittings
(x36+2)
(2): Wheel (x8)
(3): Handle (x4)
(4): Screw (x8)
Φ4*20
(5): Shim (x8)
(6) : Screw (x12)
Φ3.5*35
(7) : Screw (x60)
Φ3.5*12
(8): Screw (x8)
Φ8*130
(9) : Guide (x3)
(10): Hinge (x2)
(11): Cylinder (x8)
(12): Layer (x8)

6
INSTALLATION
Step 1
Attach the guides (9) to the side-boards (A-2) with screws (7) as shown.
Step 2
Insert the eccentric fittings (1) to the shown positions of the side-boards (A-2).

7
Step 3
Assemble the bottom-board (B-2), top-board (B-3), back-board (B-13) and two
side-boards (A-2) together as shown in the picture.
Step 4
Assemble the left bottom-board (B-2), top-board (B-3), back-board (B-13) and
two side-boards (A-2) together as shown in the picture.

8
Step 5
Attach the wheels (2) to the bottom of the cabinet with screws (7).
Step 6
Attach the table top (A-1) to two cabinets with cylinders (11), shims (5) and
screws (8) as shown.

9
Step 7
Set the shelves height with layers (12). Slide two layer-boards (B-4) into the
cabinet.
Step 8
Attach two drawing side-boards (B-11) to the drawing face (B-5) with eccentric
fittings (1), then slide the bottom drawing (A-3) along the slots as shown.
Repeat this step for another time.

10
Step 9
Attach two drawing side-boards (B-10) to the drawing face (B-9) with eccentric
fittings (1), then slide the bottom drawing (A-3) along the slots as shown.
Step 10
Attach the handles (3) to the corresponding positions of the assembled part of
step 9 with screws (4). Attach the drawing back-board (B-12) and (B)-8 to the
back of the drawers with screws (6).

11
Step 11
Slide three drawers to the nail table as shown. Attach the handle (3) to the door-
board (B-1) with screws (4). Attach door-board (B-1) to the cabinet with hinges
(10) and screws (7) as shown.
Step 12
Attach the fan (B-7) to the tabletop as shown.

12
CLEANING & CARE
 Wipe regularly with clean water and a damp, clean, soft white cloth.

General cleaning can be done as needed with a mild detergent and water
solution.

Always rinse with clean water and dry. For heavy soiling, dampen a soft
white cloth or soft bristle brush. Use care as scrubbing can damage the
surface.

More difficult stains can be treated, but this should be occasional, not
daily, cleaning.
 ANY cleaning solution used must be removed with clean water and a clean
white cloth. Cleaning residue left on the material can cause it to dry out
and crack, or affect the color.
 DO NOT use any cleaners with corrosive ingredients (lye, acids or
ammonia).

13
Living and Home
A Home is for Living in
For comfort and style update your living space.
Browse contemporary and classic designs and find the
perfect home to your look and the perfect spot to lounge.
Put your feet up and sink into our stylish home decor.
We are mainly engaged in home, outdoor, home appliances,
office, bathroom, provided high quality and affordable
products for you. We value every one of our customers and
our professional service team is always available to help you.
livingandhome.co.uk