Living Essentials Donna BMSWBK0215 User manual

Model # BMSWBK0215
We appreciate the trust and confidence
you have placed in LivingEssentials through the purchase of this jewelry cabinet.
Thank you for choosing LivingEssentials !
THANK YOU
Assembly Instruction
Instrucción De Montaje
Donna Jewelry Cabinet - Black
Donna Joyero con Espejo - Negro

For faster service:
Please contact Living Essentials
Regarding any defective product(s) / Part(s).
Our Customer Service Representative will assist you
through the process of obtaining replacement part(s) .
Visit our website and fill out the Parts & Service Form,
Give us a call, or email us for replacement parts at:
1-888-818-8789
r[email protected]
LIVING ESSENTIALS
1040 Walnut Ave.
Pomona, CA 91766
Attention: Customer Service Department
Limited Warranty
LIVING ESSENTIALS’ products are warranted to be free from defects in material and workmanship for a period of ONE YEAR:
One-year warranty from date of original purchase by consumer. If you believe your product is defective, please call, write, or e-mail our
customer service department.
Should your product be defective, LIVING ESSENTIALS will help in issuing replacement parts. Whether you call or write, please have your
model number and reference number located on the original packaging ready for our customer service team. You will be asked to tell us
what product you have, along with the date of purchase and the way you believe the product is defective. For any parts request, it must
include images of the defective part/s. Please do not ship your product back to us unless we specifically request you to do so. If it is
necessary for your product to be returned, all returns or exchanges must be made through the original store of purchase. Proof of purchase
must accompany the returned product. LIVING ESSENTIALS is not responsible for any store policies for returns or exchanges.
Note: This Warranty does NOT apply to any wear and tear. All replacement parts will be shipped standard ground service.
NO EXPEDITED Service available (for example; next day air, 2 day air service, 3 day air), there will NOT be any exceptions.
LIVING ESSENTIALS is not responsible for any consequential damages, which may arise out of the purchase, or use of any of our
product/s. LIVING ESSENTIALS is not responsible for any personal injury, or property/equipment damage from the use of such
product/s. LIVING ESSENTIALS’ liability for any breach of warranty shall be limited to replacement of the defective parts as
described above.
Important: Some states do not allow the exclusions or limitations
so the above limitations or exclusions may not apply to you.
Copyright by: LIVING ESSENTIALS and its affiliates

Model # BMSWBK0215
Donna Jewelry Cabinet - Black
Donna Joyero con Espejo - Negro
INSTRUCCIONES DE INSTALACIÓNINSTALLATION INSTRUCTIONS
BEFORE BEGINNING ANTES DE EMPEZAR
• Please read all instructions carefully. • Lea todas las instrucciones
cuidadosamente.
• Familiarícese con todas las piezas
(VEA “PIEZAS”) y verifique las cantidades.
• Siga todas las precauciones de seguridad
(vea “PRECAUCIONES DE SEGURIDAD”)
• Familiarize yourself with all parts
(see "PARTS") and check quantities.
1
• Follow all safety precautions (see
“SAFETY PRECAUTIONS”).
Design & Functionality, all in one place. | www.livingess.com.

SAFETY PRECAUTIONS | PRECAUCIONES DE SEGURIDAD
• This unit contains small parts which could be a choking
hazard for small children. Children should be under adult
supervision at all times or serious injury could occur. DO
NOT LET CHILDREN PLAY IN OR AROUND THE UNIT
DUE TO THE POSSIBLE RISK OF FINGER
ENTRAPMENT.
• Clear out the space for assembly and lay out all parts
base on Parts List, extra room will allow you to easily
determine if all the pieces are present.
• We recommend you protect your work surface during
assembly to prevent scratching or damage to table tops,
wood floors, etc.
• Save all packing materials until assembly is complete to
avoid accidentally discarding smaller parts or hardware.
• Always unload unit prior to moving the unit. The weight
of personal belongings can cause the unit to become
unstable and either tip or collapse. Serious bodily injury
and/or damage to personal belongings may occur.
• Do not overload unit. If any shelf greater than ½", it is
overloaded. The shelf could collapse and cause serious
bodily injury and/or damage to personal belongings.
• Do not climb or step on the unit. The unit may become
unstable and either tip or collapse. Serious bodily injury
and/or damage to personal belongings may occur.
• Do not mount or attach anything to the sides, rear or front
of the unit as this can create a force which can cause the
unit to tip. Serious bodily injury and/or damage to
personal belongings may occur.
• Do not hang this unit on the wall. The product structure is
not designed for wall hanging.
• Follow proper safety procedures when using power tools
and ladders.
• Wait to fully tighten the bolts until all have been inserted
and hand tightened.
• Please check for any loose screws and tighten them
before you use.
• Este producto contiene piezas pequeñas que pueden
causar peligro de asfixia a niños pequeños. Los niños
deben estar bajo la supervisión de un adulto en todo
momento, de lo contrario pueden ocurrir lesiones
graves. NO DEJE QUE LOS NIÑOS JUEGAN EN O
ALREDEDOR DE LA UNIDAD DEBIDO AL POSIBLE
RIESGO DE INGRESO DE DEDO.
• Despeje el espacio para el ensamblaje y extienda todas
las piezas de la base en la Lista de piezas; un espacio
adicional le permitirá determinar fácilmente si todas las
piezas están presentes.
• Recomendamos que proteja su área de trabajo durante
el ensamblaje para no rayar las superficies de las
mesas, pisos de madera, etc.
• Guarde todos los materiales de embalaje hasta que se
complete el ensamblaje para evitar descartar
accidentalmente piezas o herrajes más pequeños.
• Vacíe siempre la unidad antes de moverla de lugar.
El peso de los objetos personales puede resultar en
que la unidad quede inestable, se vuelque o colapse
pudiendo causar lesiones personales graves y / o
daños a los objetos personales.
• No sobrecargue la unidad. Si hay un estante mayor
que ½ ", está sobrecargado. El estante podría
colapsarse y causar lesiones corporales graves y / o
daños a las pertenencias personales.
• No escale o suba a la unidad. La unidad puede
resultar inestable y puede volcarse o colapsar
pudiendo causar lesiones graves personales y daños
a los objetos personales.
• No instale o fije nada a los laterales de la unidad o
partes delantera o trasera ya que puede crear peso y
resultar en que la misma se vuelque pudiendo causar
lesiones graves personales y daños a los objetos
personales.
• No cuelgue esta unidad a la pared. La estructura del
producto no está diseñada para colgarse en la pared.
Puede ocurrir lesiones personales graves y daños a
los objetos personales y / o a la pared.
• Siga los procedimientos de seguridad adecuados al
usar herramientas eléctricas y escaleras.
• Espere a apretar completamente los pernos hasta que
todos hayan sido insertados y apretados a mano.
• Compruebe si hay tornillos sueltos y apriételos antes
de usarlos.
WARNING ADVERTENCIA
2

PARTS | PIEZAS
FX6 X2
X2
X6 X2
X1
J
K L X1M
G H
3
A
C
B
D
E
E

HELPFUL HINTS | CONSEJOS PRÁCTICOS
INSTALLING CAM LOCKS
TIGHTENING SCREW TORNILLO DE APRIETE
INSTALACIÓN DEL CIERRE DE LEVA
4
Use these helpful hints to ensure proper assembly.
Review and refer back to these hints when
prompted to do so in an assembly step.
We recommend you protect your work surface
during assembly to prevent scratching or damage
to table tops, wood floors, etc.
Wait to fully tighten the bolts until all have been
inserted and hand tightened.
Please check for any loose screws and tighten
them before you use.
Use estos consejos prácticos para asegurarse de
una instalación apropiada. Lea y revise de nuevo
estos consejos cuando se le indique en los pasos
de instalación.
Recomendamos que proteja su área detrabajo
durante el ensamblaje para no rayar las superficies
de las mesas, pisos de madera, etc.
Espere a apretar completamente los pernos hasta
que todos hayan sido insertados y apretados a
mano.
Compruebe si hay tornillos sueltos y apriételos
antes de usarlos.
• Identify hole on screw. Look
closely.
• Identificar el agujero en el
tornillo. Búsquelas
detenidamente.
• Assure the hole points to the hole on the
panel and push screw post into hole.
• Asegúrese de que el orificio del panel apunte
al agujero y empuje el poste del tornillo en el
agujero.
• Use a flathead screwdriver to secure the
perforated screws, use Allen Key to screw
the screw into the hole.
• Utilice un destornillador de punta plana para
asegurar los tornillos perforados, Utilice la
llave Allen para atornillar el tornillo en el
orificio.
• Hole MUST point toward
hole in edge of panel.
• El orificio DEBE apuntar
hacia el agujero en el borde
del panel.

STEP 1
PASO 1
INSTALLATION | INSTALACIÓN
X6
G
G
G
5
Insert the screw(H) through the wood plate hole(C&E&F), the hole MUST point toward
hole in edge of panel.
Inserte el tornillo (H) a través del orificio de la placa de madera (C&E&F), el orificio
DEBE apuntar hacia el orificio en el borde del panel.

INSTALLATION | INSTALACIÓN
STEP 2
PASO 2
X6
F
F
F
F
F
X2
H
H
X1
L
L
L
6
2
1
3
4
Assemble the two legs (A&D) with across bar (C&E&F) using bolt (G) and Allen Key (M).
Place the bung(J) in each side hole in order to adjust the height.
Ensamble las dos patas (A&D) con la barra transversal (C&E&F) con el perno (G) y la
llave Allen (M). Coloque el tapón (J) en cada orificio lateral para ajustar la altura.

INSTALLATION | INSTALACIÓN
X2
J
J
STEP 3
PASO 3
X2
K
K
7
Attach the jewelry cabinet (B) and the shelf of hairdryer （）to the legs (A&D) using bolt
(L) and washer (K).
Fije el gabinete para joyas (B) y el estante de secador () a las patas (A&D) con el perno
(L) y la arandela (K).
X1
M
M

INSTALLATION | INSTALACIÓN
STEP 4
PASO 4
8
Open the jewelry cabinet, there are LED lights on the top inside, they are
battery-operated, 3 batteries is required (not included). The lights are controlled by the
magnetic sensor, when the door opens the lights turn on, and when the door closes
the lights turn off.
Abren gabinete de la joyería, hay luces LED en la parte superior interior, funcionan con
baterías, se requieren 3 baterías (no incluidas). Las luces son controladas por el sensor
magnético, cuando la puerta se abre, las luces se encienden y cuando la puerta se
cierra, las luces se apagan.
1
2