Living Spaces CROWN MARK B9100-Q-HBFB User manual

ASSEMBLY INSTRUCTIONS
MODEL:B9100-Q-HBFB / B9100-K-HBFB
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL
BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS.
CLEANING INSTRUCTION
After assembled,clean & polish the complete parts if necessary with soft clotch ang industrial recognized furniture polish. MADE IN MALAYSIA
Thank you for purchasing this quality product.Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment.Identify and count all parts and compare with hardware
list as below: STEP 1
COMPLETED
ASSEMBLY
Step 1 :Attach and tighten the Leg
Post (L/R) (B) to the Head Board
(A).Insert JCBB (M8) With Washer
(C&D) to affix.
BACK VIEW
ITEM DRAWING DESCRIPTION QTY
1A HEAD
BOARD
(BOX 1) BOX OF HEADBOARD
HB LEG
POST (L/R) 2B
ITEM DRAWING DESCRIPTION DIMENSION
8 x 35MM (Nylok)
CJCBB (M8)
WITH WASHER
D
QTY
4
1
ALLEN KEY M5 5 x 35 x120MM
(BOX 1) BOX OF HEADBOARD (HARDWARE LIST)
THE HARDWARE IS LOCATED IN THE PACKING ITEMS
A
B
L
C
C
B
R
C
C
4x C
D
CROWN MARK (CRWN)

ASSEMBLY INSTRUCTIONS
NOTE:MUST TIGHTEN SCREW PERIODICALLY.WITH USE SCREWS WILL
BECOME LOOSE CHECK THIGHT OF ALL SREWS EVERY 6-8 WEEKS.
CLEANING INSTRUCTION
After assembled,clean & polish the complete parts if necessary with soft clotch ang industrial recognized furniture polish. MADE IN MALAYSIA
Thank you for purchasing this quality product.Be sure to check all packing material carefully for small parts which
may have come loose inside the carton during shipment.Identify and count all parts and compare with hardware
list as below: STEP 1
COMPLETED
ASSEMBLY
Screw Driver is not included
STEP 2
12
3
Important !!
LEVEL THE SIDE RAIL BY
COVERING WITH A SOFT CLOTH
AND TAPPING WITH A HAMMER.
Press laterally into
the groove and
drop down.
C
D4
Affix the Bottom
Rail Support (D) to
Wooden Slat (C) as
Shown.
Affix the Side Rail (F) to
the Wooden Slat (C) using
the CSK screw (E) and a
screwdriver.
F
5E
C
E
A
PART LIST
ITEM DRAWING DESCRIPTION QTY
AHEAD
BOARD 1
(BOX 1) BOX OF HEADBOARD
ITEM DRAWING DESCRIPTION QTY
(BOX 2) BOX OF FOOTBOARD
BFOOT
BOARD 1
CWOODEN
SLAT 4
DSLATS
SUPPORT 8
ITEM DRAWING DESCRIPTION QTY
(BOX 3) BOX OF SIDE RAILS
ESIDE RAILS 2
THE HARDWARE IS LOCATED IN THE PACKING ITEMS
A
B
B
C
D
D
C
D
D
C
D
D
CROWN MARK (CRWN)
MODEL:B9100-K-HBFB , B9100-KQ-RAIL
E
ITEM DRAWING DESCRIPTION DIMENSION QTY
FC.S.K SCREW
(M4) 4 x 32mm 8
(BOX 2) BOX OF FOOTBOARD HARDWARE LIST