Livoo TES242 User manual

Instruction Manual
WWW.LIVOO.FR
Reference : TES242
Version : 1.4
Language : English
LE speaker wireless charger
fast charge

Instruction Manual
1
Thank you for buying our LIVOO product. We take great care in design, ergonomics and ease of use of our
products. We hope that this product will give you complete satisfaction.
This instruction manual is also available on our website www.livoo.fr
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THE APPLIANCE FOR THE FIRST TIME, PLEASE REA CAREFULLY THESE INSTRUCTIONS BEFORE USING
THE APPLIANCE AN SAVE IT FOR ANY FURTHER NEE .
oo not use other cable than that supplied with the product.
oIn case of dysfunction, entrust your wireless charger to a specialist.
oNo pieces can be repaired or replaced by the user.
oAny signs of wear and tear please discard immediately.
oMaintain your product shielded from dust, rain, water or from humidity.
oo not subject your product to sources of inflammation or important heat. o not throw it to the fire.
oo not place the wireless charger near magnets.
oMaintain your product out of reach children.
oWipe clean with a damp cloth only. o not use detergents.
SPECIFICATIONS
•Adjustable phone holder
•Fast induction charger
•Bluetooth® compatible speaker
•Touchscreen bedside lamp
•Input: C 5V / 2.1A 9V / 1.67A
•Output: 10W
•Type C port
•Bluetooth version : 5.0
•Speaker power: 4Ω5W
• Battery: 1500mAh / 3.7V
Introduction
This product has a wireless charger is an intelligent product, with simple design and compatible with any
mobile phones with QI standard. Mobile phone is without plug when charging, which is more convenient. If
your mobile is not QI you can still enjoy this product by using the wireless receivers (not included).

Instruction Manual
2
ESCRIPTION
1.Induction charger slot
2.Aluminium shell for heat dissipation
3.Illuminated ring
4.Function button
5.Type C interface
6.Touch light switch
7.Speaker cavity
GENERAL OPERATION
Instructions
1. Plug the USB port of the USB data cable to the power adapter and the Type C end to the wireless charger
2. After the product is powered on, the product indicators flash blue and white
3. Place the device that needs to be charged in the charging indication area of the product, the white
indicator light goes out and the blue indicator light comes on, the blue light stays on and enters the
charging state
4. If your phone is not equipped with QI technology, connect a compatible receiver (not included) to the
appropriate input on your phone.
5. Unplug the wireless charger after use.

Instruction Manual
3
TACTILE LAMP
1 . Touch the first time to start the light 10% brightness
2. Touch the second time to change the light 60% brightness
3. Touch the third time to change the light 100% brightness
4. Touch the fourth time to turn off the light
BLUETOOTH COMPATIBLE SPEAKER
In the off state, press the play button for about 3 seconds, and there is a beep sound, the Bluetooth
indicator light is always flashing, indicating that the speaker is searching for pairing. At this time, turn on
the Bluetooth function of your mobile phone. In the Bluetooth device, search for Bluetooth, click to select
the TES242 device name, and it automatically enters the pairing. After the pairing connection is successful,
the tone indicator light will stop blinking.
If the product is not paired for 10 minutes the speaker Bluetooth indicator will stop blinking, and it will
automatically turn off.
BUTTON FUNCTIONS
POWER SWITCH / PLAY / PAUSE / HAN S-FREE CALL
Press and hold for 3 seconds to turn on the phone. In the playback sate, short press to pause the song,
short press again to play the song. When there is a phone call, short press to answer the call, long press for
3 seconds to reject the call. Press for 3 seconds to shut down
VOLUME UP / NEXT SONG
In the playback state, short press to increase the volume, and a pop-up boost will occur when the volume
is maximized. Long press to the next song
VOLUME OWN / PREVIOUS SONG
In the playback state, short press in order to decrease the volume, long press will play the previous song
LOW VOLTAGE ALERT
When the speaker is almost powered off, a popping sound will be emitted, indicating that the sound needs
to be charged
APPLICABLE DEVICES
Intelligent identification charging device: compatible with major brand and QI compliant mobile devices

Instruction Manual
4
Note
This product supports fast wireless charging function, meets the QI wireless standard charging standard,
and realizes short-range wireless energy transmission by magnetic induction. This device supports all QI
standard wireless charging devices. When a 5V output adapter is used, the wireless charger supports 5W
load, suitable for QC2.0 and above adapters, wireless charging gas supports 10W load, with overcharge
protection (9V) and overcurrent protection (2A)
EU DECLARATION OF CONFORMITY
We
ELTA
BP61071
67452 Mundolsheim – France
Herewith declare under our sole responsibility, that the radio equipment
Wireless charger fast charge
TES242 (Frequency range 2402-2480 kHz )
Fulfils the essential requirements of the irective 2014/53/UE
The following standards were applied:
Radio:
EN 303 417 V1.1.1
EMC:
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
EN 301 489-17 V3.2.4
EN 300 328 V2.2.2
Health and Safety:
EN 62368-1:2014+A11:2017
EN 62311:2020
EN50665:2017
Mundolsheim, 15/04/2021

Instruction Manual
5
Correct dis osal of the unit
(Electrical and Electronic Equi ment)
(Applicable in the European Union and the rest of Europe that have adopted separate collection systems
countries)
The European irective 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old
household electrical appliances must not be disposed of in the normal household waste stream.
Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain and
reduce the impact on human health and the environment. The symbol of the crossed out dustbin is marked on all products to
remind the obligations of separate collection. Consumers should contact their local authority or retailer for information
concerning the correct disposal of their product.
•Non contractual illustration
•Product information is subject to change without prior notice
LIVOO
BP 61071
67452 Mundolsheim