User manual
4
-Note: During power on, w en t e speaker is sitting idle and not any input signals are being received for
about 15 minutes, it will automatically power off.
TWS PA R NG FOR TWO UN TS
If you boug t 2pcs of TES220, t ese two units can be paired wirelessly.
1. Turn on bot units of t e TES220, make sure bot units aven't been connected to ot er source devices
via Bluetoot
2. Press t e TWS button on eit er of t ese two units to pair wit anot er unit, a beep sound will be eard,
w en pairing as been carried out successfully, a voice prompt “TWS paired” will be eard, meanw ile,
t e blue circle lig t of t e connected unit stops flas ing.
Now t ese two units can be played and controlled sync ronously during t e Bluetoot playback mode.
3. Press it again to break t e current TWS connection, a voice prompt “TWS disconnected” will be eard.
OPERAT NG THE SPEAKER N BLUETOOTH MODE
Pair t e Speaker manually
If t e speaker as never been paired wit a Bluetoot device before, you need to follow t e pairing
instructions below to link t e speaker wit your Bluetoot device.
1. W en t e speaker turned on, a voice “Bluetoot mode” will be eard and t e operating mode indicator
flas es in blue. T e speaker is ready to pair wit your Bluetoot device.
2. Activate Bluetoot on t e compatible device, and set it to searc for compatible devices.
3. Select t e speaker name: “TES220” from t e list of found devices.
Tips: Only one playback unit can be connected to t e speaker. If t e speaker is already connected to
anot er playback unit, t e speaker will not appear in t e BT selection list.
4. If your device asks for a passkey (depending on t e device manufacturers, model, and software version),
t en enter digits “0000” (four zeros) and press OK.
If pairing as been carried out successfully, a voice prompt “device paired” is eard, meanw ile, t e blue
circle lig t stops flas ing.
If t e speaker as ever been paired wit a Bluetoot device before. You need to follow t e pairing
instructions below to link t e speaker wit your Bluetoot device.
1. After turning on t e speaker, t e speaker will searc for t e last paired device. T e operating mode
indicator will flas in blue. If t e unit finds t e last paired Bluetoot device, a voice prompt “device
paired” is eard and operating mode indicator will keep in blue and stop flas ing.
2. After successfully pairing, you can begin playing music from your Bluetoot device wirelessly to t e
speaker.
US NG THE SPEAKER AS A HAND FREE BLUETOOTH® SPEAKERPHONE
1. Link your cell p one to t e speaker via Bluetoot as described above.
2. W en receiving an incoming call on your cell p one, tap button on t e speaker to switc t e incoming
call from cell p one to t e speaker. Complete your call using t e built-in microp one and speaker.
