Ljusdesign neo profile User manual

neo
PROFILE
USER MANUAL
Contents
What’s in the box? 2
Technical specication 2
Product range 2
Mounting on track 3
Operational features 4
Settings 5
Lighting design 6
Gobo projection 7
Cleaning and maintenace 7
2016-04-20 Rev A01

2
Product range
NEO30-P-1 neo Profile, grey 15–45 degs, 3000K CRI 90+, 18W
NEO30-P-2 neo Profile, black 15–45 degs, 3000K CRI 90+, 18W
NEO30-P-3 neo Profile, white 15–45 degs, 3000K CRI 90+, 18W
NEO30X-P-1 neo Profile DMX, grey 15–45 degs, 3000K CRI 90+, 18W
NEO30X-P-2 neo Profile DMX, black 15–45 degs, 3000K CRI 90+, 18W
NEO30X-P-3 neo Profile DMX, white 15–45 degs, 3000K CRI 90+, 18W
Neo Filter Rosco and LEE supergel 70x70 rounded corners
NEO91-1 neo Barndoor, grey
NEO91-2 neo Barndoor, black
Gobo Holder Gobo Holder, E-size For Neo Profile
Gobo Metal Gobo Standard E-size For Neo Profile 37,5mm
Gobo B/W Special gobo E-size Template
Gobo B/W Special gobo E-size Copy
NEO95 Neo-Effekt Animation device
NEO96 Disc Wave Animation disc
NEO97 Disc Polka Animation disc
Technical specification
System 3-phase circuit track
Operating voltage 100–240V~ 50/60Hz
Dimmer On-board dimmer / not mains dimmable
Protection class IP20
What’s in the box?
Neo Profile comes with following items as standard:
• Luminaire (NEO30-P)
• Filters: Rosco #119, LEE 202 (4000K), LEE 206 (2700K)
• User manual

3
Put the luminare in the track.
Lock the side lock.
Lock the adapter lock by pushing until it clicks.
Mounting on track
The fixture is equipped with adhoc® LED driver. It fits all known 3-phase circuit tracks
(eg. Nordic Aluminium, Erco, Zumtobel, iGuzzini, Eutrac, Hoffmeister and others).
DMX version (NEO30X) uses the Global Trac Control-system.

4
Pan and tilt lock makes it possible to target and lock the device in a fixed position.
The luminare can be rotated 365 degrees and be locked with the pan lock.
1. Loosen the tilt knob.
2. Tilt the fixture.
3. Tighten the tilt knob.
1. Loosen the pan lock knob.
2. Rotate the fixture.
3. Tighten the pan lock knob.
The tilting is limited from 0 to 93 degrees,
further tilting can result in the lock being
damaged.
Operational features
Tilt locking
Pan lock
Tilt angle

5
Adjust the brightness with
the potentiometer.
Set up the phase [3 . 1 . 2]
The dots symbolizes ”off”
Settings
Phase selector
Dimmer
These settings are consistent with adhoc® LED driver.
For DMX (NEO30X) and other applications, please refer to separate instruction sheet.

6
Neo Profile has very short optics and require careful adjustments.
Lighting design
Set beam angle and edge
sharpness by moving
lenses.
Shape the beam by
adjusting the four shutters.
You can adjust edge
sharpness and/or colour
temperature by applying
filter.

7
Insert the gobo pattern
into the gobo holder.
Place the gobo in the slot
on the top side.
When gobo is placed, you
can rotate the projection.
Since the design is not air tight, dust particles might settle in.
We recommend the use of an oil-free air compressor to blow out the dust on a
regular basis.
We do not recommend end-users to open the fixture to clean the glass lenses or LED.
Gobo projection
Cleaning and maintenace
Neo Profile accommodates a gobo holder for E-size (37.5mm) gobo of metal or glass.

Södra Skeppsbron 4, 802 80, Gävle, Sweden
www.ljusdesign.se  [email protected]  [phone]
Questions?Keep in touch!