LocknCharge UV ONE User manual

FCC STATEMENT
WARNING: CHANGES OR MODIFICATIONS TO THIS UNIT NOT EXPRESSLY APPROVED BY THE PARTYRESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE
EQUIPMENT.
NOTE: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITHTHE LIMITS FOR ACLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED
TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY
ENERGYAND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO OR
TELEVISIONRECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND ON,THE USER ISENCOURAGED TOTRY TO CORRECTTHE INTERFERENCE BY ONE OR MORE OF THE
FOLLOWINGMEASURES: REORIENT OR RELOCATE THE RECEIVING ANTENNA; INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER; CONNECT THE EQUIPMENT INTO AN
OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THERECEIVER IS CONNECTED; CONSULT THE DEALER OR AN EXPERIENCED RADIO/TV TECHNICIAN FOR HELP.
FCC RADIATION EXPOSURE STATEMENT
THIS EQUIPMENT COMPLIES WITH THE FCC RF RADIATION EXPOSURE LIMITS SET FORTH FOR AN UNCONTROLLED ENVIRONMENT. THIS EQUIPMENT SHOULD BE INSTALLED AND OPERATED
WITH A MINIMUM DISTANCE OF 20 CENTIMETERS BETWEEN THE RADIATOR AND YOUR BODY. THIS EQUIPMENT COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWINGTWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING INTERFERENCETHAT MAY
CAUSE UNDESIRED OPERATION.
CAUTION
The manufacturer is not responsible for
any interference or damage caused by
unauthorised modications to this
equipment. UV light can be irritating to
the eyes and skin. This device has been
designed to contain UV exposure. Do
not attempt to look directly at the UV
lamp while it is on.
We stand behind the quality of our product and oer a
1-year warranty. Exclusions and limitations may apply.
To view the full warranty and return policy visit:
www.lockncharge.com/eu/warranty
By using this product, you agree to the Legal
and Privacy Policies as stated on our website at:
www.lockncharge.com/eu/privacy-policy
Please contact us with any questions or concerns.
www.lockncharge.com/eu/contact-us
4510 Helgesen Dr. Madison, WI 53718
[email protected] | [phone]
Let’s get started.
Disinfects in just 30 seconds.

Ready to sanitise, right out of the box.
If you are experiencing trouble, please contact us:
[phone] | [email protected]
Need help?
Power Adapter
Plug in provided power
adapter to power unit.
Motorised Door
Provides a completely
touchless experience.
Motion Sensor
Your primary form of device input.
Waving your hand over this sensor will
activate disinfection sequence, open
sanitising bay, and conrm settings.
OLED Display
Instructions and notications
will display here.
On/O Switch
Use this switch to power
on and o the unit. Power cables with
magnetic ring must be used with this unit to
ensure compliance with the Class B FCC limits.
Mounting Plate
Location for mounting plate for
use with wall mount, table stand,
and roller stands. A mounting
plate and wall mount are included
for easy wall installation. The
mounting plate is pre-installed.
Remove if not mounting.
To watch an instructional video or to find out more about the UVone Configurator App, please visit www.lockncharge.com/eu/support/uvone
Plug UVone into power
with provided cord.
Flip switch to start
UVone unit.
Follow on-screen instructions
to complete set up and begin
sanitising.
To change settings on your
UVone unit, download the
UVone Congurator App. If
prompted for a password,
please contact Support.