3. For a curved back or obstruction
in display or TV kindly follow
the above process
Interface bracket x 2
Checklist
Wall Mount x 1
Concrete
Screw
IMPORTANT: Prior to installation, ensure that you have received
all the parts as per the checklist
1. Product Dimension
M8 X 25 M4 X 20
Fischer
expansion plug
QTY 4
M5 X 40
QTY 4
M6 X 20
QTY 4 QTY 4
M6 X 50
QTY 4
Washer x 10
QTY 6
QTY 6 QTY 10
Dimension in mm
QTY 4
Washer x 4
2. Installation
Instructions for fixing wall mount:
ATTENTION:Drilling the wall for the wall mount should be executed
by a craftsperson only. Exercise care to prevent
any scar or damage to the wall.
CAUTION :Wear safety glasses while operating power equipment.
Failure to comply may result in eye injury.
2. Place the interface bracket on the
TV/ display and insert the washer
and screw (Refer the checklist for
the suitable screw and washer)
www.logicav.in
Depth from wall to display
25 mm
1. Place the wall unit on the wall and make marks on the wall.
Note: While marking make sure the mount is placed in a straight line using the surface
leveler Drill the wall and insert the concrete anchor in the holes & place the mount on
the wall and insert concrete screws. (Refer A1, A2, A3, B1 in the checklist)
www.logicav.in
`M-A
M-B M-C M-E
M-D M-F M-G