Logic LGCM-65-5 User manual

INSTALLATION MANUAL
CEILING MOUNT
www.logicav.in
MODEL SERIES VESA DISPLAY SIZE MAX LOAD
LGCM-65-5 Ceiling Mount 200x200 to 42” to 65” 110 lbs (50 kg)
600x400

www.logicav.in
Checklist
IMPORTANT : Ensure that you have received all parts according to the
checklist prior to installation.
M-D:
Allen key x 1
M-B: M8 X 25 x 4 M-B: Metal
and plastic
washer x 4
M-C: M6 X 20 X 4 M-C: Metal
and plastic
washer x 4
W-A: Anchor bolt x 4Interface bracket x 2Horizontal bracket x 1Connecting
rod x 1
M-A: M8 x 2M-A: M8 X 65 x 2 M-A: Metal
washer x 4
M-A: Plastic
washer x 4

www.logicav.in
2. Installation
Choose below method for fixing projector mount.
ATTENTION: Drilling the ceiling for the projector mount should be
executed by a craftsperson only Exercise care to prevent
any scar or damage to the wall.
CAUTION : Wear safety glasses while operating power equipment.
Failure to comply may result in eye injury
Dimension in mm
1. Product Dimension
1
-769.06
1721
.
00
35.00
M A X 600 . 00
680
. 60
M
A
X
400
.
00
435
.
00
CEILING
1. Place the ceiling mount on the ceiling mark on it and than drill,
place the ceiling mount and insert the anchor bolt (Refer W-A in the checklist-kit)

CEILING
CEILING
2. Place the id rod and then
insert the bolt nut. (Refer
M-A in the check list)
4. Place the interface bracket on the TV/ display and insert the washer and screw
(Refer the checklist for the suitable screw and washer)
3. Remove the nut from the horizontal
bracket and place on the ceiling
mount then insert the nut.
www.logicav.in

CEILING
CEILING
6. Remove the clamp screw
and place the TV/display
on the ceiling mount
7. After placing the display
insert screw to the clamp
www.logicav.in

CEILING
Angle adjustment details
8. Slightly loosen the screw to adjust the angle
9. Slightly loosen the screw to adjust the angle
www.logicav.in

Angle adjustment details
10. Slightly loosen the screw to adjust the angle
www.logicav.in

www.logicav.in
CEILING
Final view after installing the mounted Projector on the Ceiling