Checklist 2. Installation
1. Product Dimension
Important: Prior to installation, ensure that you have received
all the parts as per the checklist
Instructions for fixing wall mount:
Drilling the wall for the wall mount should be executed
by a craftsperson only. Exercise care to prevent any scar
or damage to the wall.
Attention:
Cauton: Wear safety glasses while operating power equipment.
Failure to comply may result in eye injury
1. Place the wall unit on the wall and make marks on the wall.
Note: While marking make sure the mount is placed in a straight line using the surface
leveler Drill the wall and insert the concrete anchor in the holes & place the mount on
the wall and insert concrete screws. (Refer A1, A2, A3, B1 in the checklist)
2. Place the interface bracket on the
TV/ display and insert the washer
and screw (Refer the checklist for
the suitable screw and washer)
3. For a curved back or obstruction
in display or TV kindly follow
the above process
www.logicav.in
M8 X 25 M4 X 20
QTY 4
M5 X 40
QTY 4
M6 X 20
QTY 4 QTY 4
M6 X 50
QTY 4
QTY 4
Washer
Concrete
Screw
Fischer
expansion plug Washer
QTY 4
QTY 4 QTY 10
Wall Mount x 1
Interface bracket x 2
www.logicav.in Dimension in mm
Depth from wall
to display Tilting angle
M -A
M -B M -C M -D M -E M -F M -G