Logik LM212R User manual

22Product Overview
11Unpacking
Connect the USB Receiver
33Installing the Batteries
Wireless Optical Mouse
Quick Start Guide
LM212R
LM212B
LM212V
LM212O
LM212P
Wireless Optical Mouse
Quick Start Guide
LM212R
LM212B
LM212V
LM212O
LM212P
RF Receiver
(PN.: MRN)
Quick Start Guide
(PN.: LM212R_B_V_O_P-001)
AAA Batteries x 2Mouse
Remove all packaging from the unit. Retain the packaging. If you
dispose of it, please do so according to the local regulations.
The following items are included:
If items are missing or damaged, please contact Partmaster (UK only).
Tel: [phone] for assistance.
Thank you for purchasing your new Logik Wireless Optical Mouse.
Please familiarise yourself with this Quick Start Guide to enjoy all the exciting
features oered.
44Plug the RF receiver directly into
your computer’s USB port.
Open the battery
cover then take the
RF receiver out.
Battery Cover Batteries X 2
1st
2nd
Slide the battery cover o and insert 2 x AAA batteries. Close the battery cover.
Ensure batteries are inserted with the correct polarities.
Scroll Wheel
Left Mouse
Button
Right Mouse
Button
C
M
Y
CM
MY
CY
CMY
K
LM212R_B_V_O_P QSG_120505.pdf 1 05/06/2012 3:45 PM

55Activate the Wireless Mouse 66Troubleshooting 77Safety Warnings
Visit Partmaster.co.uk today for the easiest way to buy
electrical spares and accessories. With over 1 million
spares and accessories available we can deliver direct to
your door the very next day. Visit www.partmaster.co.uk or call 0844 800 3456
(UK customers only) Calls charged at National Rate.
DSG Retail Ltd. • Maylands Avenue • Hemel Hempstead
Herts • HP2 7TG • England
(P.N.: LM212R_B_V_O_P-001)
This symbol on the product or in the instructions means that your
electrical and electronic equipment should be disposed at the end of its
life separately from your household waste. There are separate collection
systems for recycling in the EU.
For more information, please contact the local authority or your retailer
where you purchased the product.
Mouse or Keyboard Not Working:
1. Check that the power switch is in the“ON” position.
2. Make sure the Nano Receiver is plugged into a USB port and the
computer is on or try the Nano Receiver in a dierent USB port.
3. Check battery installation. Replace the batteries if needed.
4. If mouse performance is slow or intermittent around a wireless
network, unplug the Nano Receiver from the USB port and then
reinsert it. Switch the ON/OFF button again on the bottom of the
mouse to reactivate it. Repeat the connection procedure. You can also
try moving the mouse closer to the Nano Receiver.
5. If the mouse is moving erratically change the working surface the
mouse is operating on.
To reduce the risk of injury :
• Keep batteries out of the reach of children.
• Do not heat, open, puncture, mutilate, or dispose of batteries in re.
• Do not mix new and old batteries or batteries of different types
• Do not allow metal objects to touch the battery terminals on the
device; they can become hot and cause burns.
Battery-Powered Devices :
Improper use of batteries may result in battery uid leakage, overheating, or
explosion. Leaked battery uid is corrosive and may be toxic. It can cause skin
and eye burns, and is harmful if swallowed.
Optical :
Never point the optical sensor towards the face, particularly the eyes, to avoid
possible injury.
Wireless Devices :
• Before boarding any aircraft or packing a wireless device in luggage that will
be checked in, remove the batteries from the wireless device.
• Wireless devices can transmit radio frequency (RF) energy, whenever
batteries are installed and the wireless device is turn on.
While the mouse is in use, the optical light is visible to the naked
eye. Be careful not to look directly into the emitter hole while the
mouse is active.
Features and specications are subject to change without prior notice.
Windows is a registered trademark of Microsoft Corporation in the United States and
other countries.
DSG International Sourcing declares that the wireless keyboard and mouse
comply with the essential requirements and other relevant provisions of Directive
1999/5/EC.
Notes for battery disposal:
The batteries used with this product contain chemicals that are harmful to the
environment. To preserve our environment, disposal of used batteries according to
your local laws or regulations. Do not dispose of batteries with the normal
household waste.
For more information, please contact the local authority or your retailer where you
purchased the product.
1. Switch the ON/OFF button to power on the mouse.
2. If the mouse does not respond, use a blunt pencil to press the Connect
button to activate the connection between the mouse and the RF
receiver. If the mouse does not work after 10 seconds, pair them again.
(The receiver has an auto pairing function.)
When the mouse is successfully paired with the receiver, the mouse is
ready to use.
When the mouse batteries are low on power, the LED indicator will
begin flashing.
Connect Button
ON/OFF
Switch
C
M
Y
CM
MY
CY
CMY
K
LM212R_B_V_O_P QSG_120505.pdf 2 05/06/2012 3:45 PM