LogiLink UA0091 User manual

Size: 105 x 148mm
* 100P 雪銅紙
* 拉頁, 一本德文(在前)英文手冊, 另一本西班牙文(在前)波蘭文手冊
* 兩面, 正四色反四色彩色印刷

- 1 -
Do not throw the appliance away with the normal
household waste at the end of its life, but hand it in
at an official collection point for recycling. By doing
this you will help to preserve the environment.
1.0 Safety Instructions
Put the Device always on a stable and straight Surface. In case
of falling it can be damaged.
Don’t place the Device into direct Sunlight or in Places with high
Temperature. This can damage the Device or shorten his
average useful Life.
Don’t place it in the near of Heat Sources, like Radiators or other
heat producing Devices.
Don’t expose the Device to Rain, Water, Wetness or high Humidity.
Don’t place it in the Bathroom or the Kitchen in the near of a Sink.
Avoid the direct Contact with Water.
Don’t try to open the Device.
Prior to the first use of our product make a backup of your data.
We are not liable for any loss of data, unless you can accuse us
intention or gross negligence.
In any case, liability for loss of data is limited to the effort that is
necessary to restore from existing backup copies.
Congratulations to the Purchase of Logilink UA0091!
Please read the Manual and Safety Instructions before using the
product for the first time. Otherwise damage can be the result.
2.0 Introduction
This easy plug and play external device UA0091 is a full featured
Universal Serial Bus 3.0 Hub. It allows your computer to connect
to USB interfaces joysticks, modems, digital speakers, printers,
digital cameras, monitors, and many other USB devices.

- 2 -
2.1 Feature
Compliant with the three USB (Universal Serial Bus)
Specifications: 3.0, 2.0 and Revision 1.1 with the Data Rates
5 Gbps, 480 Mbps, 12 Mbps and 1.5 Mbps
Includes 1 upstream and 4 downstream USB ports.
Plug and play
Over-current detection and protection.
Connects up to 127 USB devices
With LED indicator for Power and each port
Supports Windows 2000/2003/XP/Vista/7
2.2 Specification
Ports Four downstream port and one upstream port
Power Self Power: 5V
Adapter: Input: 100~240v 50Hz-60Hz
Output: 5V 4A
2.3 Package Content
1 x USB3.0 4-Port Hub
1 x USB3.0 Cable
1 x External Power Adapter
1 x User manual

- 3 -
3.0 Hardware Installation
1. Plug the included AC power adapter into the power jack at
the rear of the USB 4 port hub and an electrical outlet.
2. Plug the B-type connector into the upstream port
3. Plug the A-type connector into a computer or USB hub
downstream port
4. Connects USB devices or hubs to the 4 port hub’s
downstream 1 ~ 4 ports.
Important Note:
The Hub must be connected to a USB 3.0-compliant host in
order to function in super-speed mode (5 Gbps data rate). If
the Hub is connected to a USB 2.0 or 1.1-compliant host, it
will operate only in high-speed, full-speed or low-speed mode
(480 / 12 / 1.5 Mbps).
The CE mark confirmed that this product meets the
main requirements of the Directive 2004/108/EC
2006/95/EC of the European Parliament and the
Council of Europe concerning telecommunications
and terminals regarding the Safety and health of
users and of electro-magnetic interference
compliance. The CE has been demonstrated. These
statements are deposited by the manufacturer.