Logitec LAN-WSPH01WH User manual

LAN-WSPH01WH
Skype Wi-Fi Phone
User Guide

User Guide
Guide
Wi-Fi Phone
IEEE 802.11b/g Wireless Phone
with Skype Support
LAN-WSPH01WH
E032007-EK-R01

iii
Contents
Chapter 1: Introduction 1-1
AC Power Charger 1-2
Mini USB Cable 1-2
Chapter 2: Installing the Battery 2-1
Charging the Battery 2-2
Powering On the Phone 2-3
Chapter 3: Getting Started 3-1
First-Time Startup 3-1
Understanding the Phone’s LCD Display 3-3
The Main Menu 3-5
The Power Key Menu 3-6
Creating a New Skype Account 3-7
Setting Up Your Contacts 3-8
Making a Call 3-8
Chapter 4: Managing Contacts 4-1
Adding a Skype Contact 4-1
Adding a SkypeOut Contact 4-3
Searching for Contacts 4-4
The Contacts Options Menu 4-5
Blocking a Contact 4-6
Chapter 5: Making and Receiving Skype Calls 5-1
Skype-to-Skype Calls 5-1
Receiving Skype Calls 5-2
SkypeOut Calls 5-3
Dialing a Direct Call 5-4
Receiving SkypeIn Calls 5-5
Putting a Call on Hold 5-6
Muting the Microphone 5-7
Diverting a Call 5-8
Sending Skype Voicemail 5-9
Listening to Skype Voicemail 5-10

iv
Contents
Recording a Voicemail Greeting 5-11
History Lists 5-12
Chapter 6: Personal Skype Settings 6-1
Changing Your Skype Status 6-1
Setting Your Profile 6-2
Changing Your Password 6-3
Privacy Settings 6-4
Chapter 7: Wi-Fi Network Settings 7-1
Finding Wi-Fi Networks 7-1
Preferred Networks 7-2
Setting Access to Open Networks 7-3
Chapter 8: General Settings 8-1
Changing the Display Language 8-1
Changing Display Settings 8-2
Setting Alert Tones 8-3
Setting the Time and Date 8-4
Displaying Phone Settings 8-6
Clearing Phone Settings 8-7
Advanced Settings 8-8

1-1
Chapter 1: Introduction
The LAN-WSPH01WH is a Wi-Fi (IEEE 802.11b/g) wireless phone that enables you
to make Skype™calls without using a computer. The phone enables you to use
your normal Skype account with complete mobility, allowing you to talk from any
location where you have an Internet connection through a nearby access point.

Introduction
1-2
Before preparing the Wi-Fi Phone for use, first become familiar with its main keys,
buttons, and other hardware features.
1.LCDDisplay— Color software menu display.
2. Navigation Key — Four-direction software navigation key. Pressing the key
down selects the current option.
3.RightSoftKey— Negative action key. Cancels or returns to previous menu.
4.End/PowerKey— Ends an active call. Turns the power on and off.
• Press for more than two seconds to power the phone on.
• When on, press for two to four seconds to access the Power Key menu.
• Press for more than four seconds to power the phone off.
5.HeadsetJack— Jack for headset connection.

1-3
6.USB/PowerChargePort— Power charger connection for charging battery.
7.AlphanumericKeypad— Includes 0-9, A-Z, *, and # keys.
• The [a/A *] key selects upper- or lower-case characters, numbers, or
hexadecimal.
• The [ 1 ] key selects common punctuation marks during text input.
• The [ # ] key selects special characters and symbols during text input.
8.SendKey— Calls a selected contact.
9.LeftSoftKey— Positive action key. Selects menu option.
10. Volume Button — Adjusts volume of the speaker.
Keypad Lock — The phone keypad can be locked by pressing the Left Soft Key
together with the [a/A *] key. Pressing the two keys again unlocks the keypad.
AC Power Charger
The Wi-Fi Phone will charge an installed battery when connected to the AC power
charger, and the power charger is connected to a power source. The power
charger automatically adjusts to any voltage between 100-240 volts at 50 or 60
Hz. No voltage range settings are required.
Mini USB Cable
The Wi-Fi Phone includes a mini USB cable that can be used to charge the
phone’s battery from a connected PC.

2-1
Chapter 2: Installing the Battery
After unpacking the Wi-Fi Phone, you must first install and charge the battery
pack before turning on the phone.
Warning: Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
Caution: Use only the Lithium-Ion battery pack supplied with the phone. Do not
try to install any other battery. To obtain replacement batteries, contact
your local dealer.
1. Remove Battery Compartment Cover — Place the phone face down. Push
and slide down the battery compartment cover until it becomes free.
2. Install Battery — Place the battery into the compartment. Be sure the text
label on the battery is facing out and the battery’s three metal contacts
point to the top of the phone.
3. Replace Battery Compartment Cover — Slide the battery compartment
cover back onto the phone until it clicks firmly into place.
Push Off
Install Battery

Installing the Battery
2-2
Charging the Battery
1. Connect the AC Power Charger — Lift up the rubber cover on the mini USB
charger port and connect the power charger to the port. Then, plug the
charger into an AC electrical outlet.
Note: The power charger automatically adjusts to any voltage between 100-240 volts
at 50 or 60 Hz.
2. Fully Charge Battery — For the first time use, allow eight hours to fully
charge the battery before turning on the phone.
3. Disconnect the Power Charger — When the battery is fully charged, remove
the power charger from the phone and push down the charger port’s rubber
cover.
Note: When you next have to charge the phone’s battery, you do not have to power
off the phone. Just connect the charger as described above and wait until the
LCD display indicates the battery is fully charged. After the first charge, the
charge time is about three hours.
Lift Cover
Connect
Charger

Powering On the Phone
2-3
Powering On the Phone
Push and hold down the End/Power key for more than two seconds to power on
the phone. The LCD display turns on showing an image of a white sun on a yellow
background.
Allow 30 seconds for the phone to start up.
Go to Chapter 3 “Getting Started” to learn how to set up a Wi-Fi network
connection and start using the phone.